Hello Neil,TS2000X Cheers,Allan - VK4QG
-------- Original message --------From: Neil Zampella <[email protected]> Date:
26/5/20 8:14 pm (GMT+10:00) To: [email protected] Subject: Re:
[wsjt-devel] WSJT-X 2.2.0 rc2
What's your RIG, OM ??
Neil, KN3ILZ
On 5/26/2020 2:05 AM, Allan VK4QG
wrote:
Gentlemen,
To start with, my system is a Dell 1650, i7 @3.40 GHz, 16GB RAM,
W10 pro 64bit. I do not use CAT but instead use RTS on COM1 for
opto-isolated PTT and XFR isolation for audio in and out of the
sound-card, and have done so without issue since 2006.
Two problems : -
1. I have found with rc2 that occasionally PTT is not working
at all and when it does there is often no TX audio present either.
While monitoring 'Radio' under 'Settings' I have noticed when this
occurs, after a successful transmission about two seconds into the
RX period the 'Test PTT' button turns red and from that
point there is no PTT in the following TX period. After a time it
appears to clear itself and PTT in the following period with or
without TX audio.
2. I am still getting numerous false decodes. Most of these
contain '/R' and '<.....>'. I am not using AP.
Many thanks,
Allan - VK4QG
Virus-free. www.avg.com
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
