Yaesu FT-1000mp or Icom 746 or Icom 706 is same on all Went back to rc-1 works fine AE5SB ________________________________ From: Neil Zampella <[email protected]> Sent: Tuesday, May 26, 2020 5:14 AM To: [email protected] <[email protected]> Subject: Re: [wsjt-devel] WSJT-X 2.2.0 rc2
What's your RIG, OM ?? Neil, KN3ILZ On 5/26/2020 2:05 AM, Allan VK4QG wrote: Gentlemen, To start with, my system is a Dell 1650, i7 @3.40 GHz, 16GB RAM, W10 pro 64bit. I do not use CAT but instead use RTS on COM1 for opto-isolated PTT and XFR isolation for audio in and out of the sound-card, and have done so without issue since 2006. Two problems : - 1. I have found with rc2 that occasionally PTT is not working at all and when it does there is often no TX audio present either. While monitoring 'Radio' under 'Settings' I have noticed when this occurs, after a successful transmission about two seconds into the RX period the 'Test PTT' button turns red and from that point there is no PTT in the following TX period. After a time it appears to clear itself and PTT in the following period with or without TX audio. 2. I am still getting numerous false decodes. Most of these contain '/R' and '<.....>'. I am not using AP. Many thanks, Allan - VK4QG [https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png]<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. www.avg.com<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
