Thanks Mike.
73
Bill
G4WJS.
On 07/06/2020 14:35, Black Michael via wsjt-devel wrote:
OK...it's implemented in hamlib now...you should see it in the next
release.
Mike W9MDB
On Sunday, June 7, 2020, 08:20:57 AM CDT, Chuck Reti WV8A via
wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
Mike/Bill,
I tested “Rig" split with the FT-897D using the FT-857 setting. It works.
“Split” mode is indicated on the radio’s panel, and, on the “B” VFO,
the correctly offset TX frequency is set and used in Transmit.
I’ve always used “Fake It” with the 897, since, from early on in my
use of WSJT-X, “Rig” split did not work correctly (in ways I don’t now
remember).
I’ll run with it this way, with the Pi and the Mac, and report any
anomalies.
Thanks.
Chuck Reti
WV8A
On 2020-06-06, Black Michael <mdblack98@ya...
<mailto:mdblack98@ya...>> wrote:
> It's not a regression...the FT857 has never had set_vfo or get_vfo
enabled so never should have worked.
>
> The FT857 does have set/get_vfo but it uses a vfo toggle just like
the FT897.
> If the FT857 is working well with this we can implement the same
thing for the FT897.
> Are you operating in rig split mode? Can you test with the FT857 and
tell us if rig split works OK?
> Mike W9MDB
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
