When, I looked at them, I saw Bills version had a blank line removed,
and the the 1 encapsulated in "" like "1". The previous you had did not
have that.
On 17/2/21 6:07 pm, Alex Artieda, HB9DRI wrote:
Hello Bill
Sorry but the file you send me is exact to the code propose by Mike,
the code is the same and I copied in ALL WSJT-X instances I have and I
cannot share the PTT port.
My config in Radio tab in ALL WSJT-X instances:
For RIG: I use Omni Rig 2 where CAT is configure over a separate port,
this works ok ( I never succeed to use the IC-9700 option in WSJT-X)
For PTT: I use com port 2 RTS, that works good v2.2.2 or in 2.3 and
2.4rc1 if only one instance open the port
Mode: None
Split Operation: RIG
I don’t use CAT for PTT because I need to PTT first my sequencer, then
the sequencer PTT the radio as last event.
Alex, HB9DRI
*From:* Bill Somerville <g4...@classdesign.com>
*Sent:* Tuesday, February 16, 2021 7:50 PM
*To:* wsjt-devel@lists.sourceforge.net
*Subject:* Re: [wsjt-devel] FW: BUG in WSJT-X 2.3 and 2.4rc1 COM port
Hi Alex,
the file I sent was different from the text Mike suggested.
What settings are you using on the "Settings->Radio" tab of your
WSJT-X instances?
73
Bill
G4WJS.
On 16/02/2021 12:45, Alex Artieda, HB9DRI wrote:
Hello Bill
The file you send me has the same code send to me from the
beginning, I delete the file I create and I confirm your file was
installed into the log directory in each WSJT-X instance I had,
doesn’t work.
To confirm the problem I install in another computer two WSJT-X
and use your file and doesn’t work.
As you mention in one of your last emails you will back in the
next release to sharing the PTT port, something make totally sense
if you consider it was working ok in version 2.2.2.
Regards
Alex, HB9DRI
*From:* Bill Somerville <g4...@classdesign.com>
<mailto:g4...@classdesign.com>
*Sent:* Tuesday, February 16, 2021 5:31 PM
*To:* wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
*Subject:* Re: [wsjt-devel] FW: BUG in WSJT-X 2.3 and 2.4rc1 COM port
Hi Alex,
the file I attached was the correct one. Others have used it
without issues. Please double check the file is correctly named
and has not been mangled by Windows in some way. Note the file
name must be hamlib_settings.json
73
Bill
G4WJS.
On 16/02/2021 04:29, Alex Artieda, HB9DRI wrote:
Hello Bill
Following your instructions I use your file (looks the same
as I use before) and I place in the properly log directory for
each of the WSJT-X (totally 4) and doesn’t work, the PTT is
not share.
I wonder why if in WSJT-X 2.2.2 the PTT com port was share by
default now is not?
Regards
Alex, HB9DRI
*From:* Bill Somerville <g4...@classdesign.com>
<mailto:g4...@classdesign.com>
*Sent:* Monday, February 15, 2021 6:29 PM
*To:* wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
*Subject:* Re: [wsjt-devel] FW: BUG in WSJT-X 2.3 and 2.4rc1
COM port
Hi Alex,
try the attached file. It needs to go in the log files
directory of each WSJT-X instance ("Settings->File->Open log
directory").
73
Bill
G4WJS.
On 15/02/2021 05:41, Alex Artieda, HB9DRI wrote:
Hello Mike
Sorry I didn’t answer to the list;
I create a file named hamlib_settings.json and paste
inside the code you send me:
{
"config": {
"ptt_share": 1
}
}
Then placethis file in
C:\Users\[username]\AppData\Local\WSJT-X and in
Each of the 4 WSJT-X folders but doesn’t work,
Alex, HB9DRI
*From:* Black Michael via wsjt-devel
<wsjt-devel@lists.sourceforge.net>
<mailto:wsjt-devel@lists.sourceforge.net>
*Sent:* Monday, February 15, 2021 11:11 AM
*To:* wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
*Cc:* Black Michael <mdblac...@yahoo.com>
<mailto:mdblac...@yahoo.com>
*Subject:* Re: [wsjt-devel] FW: BUG in WSJT-X 2.3 and
2.4rc1 COM port
The PTT port is no longer shareable by default.
Place this file in C:\Users\[username]\AppData\Local\WSJT-X
{
"config": {
"ptt_share": 1
}
}
Mike W9MDB
On Sunday, February 14, 2021, 07:43:47 PM CST, Alex
Artieda, HB9DRI <hb9...@emeham.com
<mailto:hb9...@emeham.com>> wrote:
Just to inform you, I found a bug regarding COM port for
PTT, it appears in WSJT-X 2.3 and in 2.4 RC1, let me explain.
I run 4 WSJT-X at the same time, I use Omnirig to control
my IC9700 but PTT is manage via a COM port, this is a must
for me to TX first a Sequencer via the COM port and later
TX the radio, I cannot use CAT for PTT, that guarantee me
no RF spikes etc. 4 WSJT-X plus MAP65 plus WSJT10 are all
configure to use COM3 for PTT, in this configuration I can
TX with ANY of the 6 programs, more precise I can TX with
the program were the decodes or best decode happens,
unfortunate since WSJT-X 2.3 and 2.4RC1 I can TX ONLY with
the FIRST program who opens the PTT COM port, the other
ones don’t work and MAP65 give a opening COM port ERROR,
the other WSJT-X simple don’t TX, would be great to fix
this bug because when you run multiple WSJT-X is a must to
work with all instance capable of TX, WSJT-X 2.2.2 works
perfect.
To confirm this bug I roll back to 2.2.2 and install 2.3
and later 2.4RC1, the bug appear in 2.3
73 de Alex, HB9DRI
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
