Hello Bill
The file you send me has the same code send to me from the beginning, I delete the file I create and I confirm your file was installed into the log directory in each WSJT-X instance I had, doesn’t work. To confirm the problem I install in another computer two WSJT-X and use your file and doesn’t work. As you mention in one of your last emails you will back in the next release to sharing the PTT port, something make totally sense if you consider it was working ok in version 2.2.2. Regards Alex, HB9DRI From: Bill Somerville <[email protected]> Sent: Tuesday, February 16, 2021 5:31 PM To: [email protected] Subject: Re: [wsjt-devel] FW: BUG in WSJT-X 2.3 and 2.4rc1 COM port Hi Alex, the file I attached was the correct one. Others have used it without issues. Please double check the file is correctly named and has not been mangled by Windows in some way. Note the file name must be hamlib_settings.json 73 Bill G4WJS. On 16/02/2021 04:29, Alex Artieda, HB9DRI wrote: Hello Bill Following your instructions I use your file (looks the same as I use before) and I place in the properly log directory for each of the WSJT-X (totally 4) and doesn’t work, the PTT is not share. I wonder why if in WSJT-X 2.2.2 the PTT com port was share by default now is not? Regards Alex, HB9DRI From: Bill Somerville <mailto:[email protected]> <[email protected]> Sent: Monday, February 15, 2021 6:29 PM To: [email protected] <mailto:[email protected]> Subject: Re: [wsjt-devel] FW: BUG in WSJT-X 2.3 and 2.4rc1 COM port Hi Alex, try the attached file. It needs to go in the log files directory of each WSJT-X instance ("Settings->File->Open log directory"). 73 Bill G4WJS. On 15/02/2021 05:41, Alex Artieda, HB9DRI wrote: Hello Mike Sorry I didn’t answer to the list; I create a file named hamlib_settings.json and paste inside the code you send me: { "config": { "ptt_share": 1 } } Then place this file in C:\Users\[username]\AppData\Local\WSJT-X and in Each of the 4 WSJT-X folders but doesn’t work, Alex, HB9DRI From: Black Michael via wsjt-devel <mailto:[email protected]> <[email protected]> Sent: Monday, February 15, 2021 11:11 AM To: [email protected] <mailto:[email protected]> Cc: Black Michael <mailto:[email protected]> <[email protected]> Subject: Re: [wsjt-devel] FW: BUG in WSJT-X 2.3 and 2.4rc1 COM port The PTT port is no longer shareable by default. Place this file in C:\Users\[username]\AppData\Local\WSJT-X { "config": { "ptt_share": 1 } } Mike W9MDB On Sunday, February 14, 2021, 07:43:47 PM CST, Alex Artieda, HB9DRI < <mailto:[email protected]> [email protected]> wrote: Just to inform you, I found a bug regarding COM port for PTT, it appears in WSJT-X 2.3 and in 2.4 RC1, let me explain. I run 4 WSJT-X at the same time, I use Omnirig to control my IC9700 but PTT is manage via a COM port, this is a must for me to TX first a Sequencer via the COM port and later TX the radio, I cannot use CAT for PTT, that guarantee me no RF spikes etc. 4 WSJT-X plus MAP65 plus WSJT10 are all configure to use COM3 for PTT, in this configuration I can TX with ANY of the 6 programs, more precise I can TX with the program were the decodes or best decode happens, unfortunate since WSJT-X 2.3 and 2.4RC1 I can TX ONLY with the FIRST program who opens the PTT COM port, the other ones don’t work and MAP65 give a opening COM port ERROR, the other WSJT-X simple don’t TX, would be great to fix this bug because when you run multiple WSJT-X is a must to work with all instance capable of TX, WSJT-X 2.2.2 works perfect. To confirm this bug I roll back to 2.2.2 and install 2.3 and later 2.4RC1, the bug appear in 2.3 73 de Alex, HB9DRI
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
