Hi Alex,
the file I attached was the correct one. Others have used it without
issues. Please double check the file is correctly named and has not been
mangled by Windows in some way. Note the file name must be
hamlib_settings.json
73
Bill
G4WJS.
On 16/02/2021 04:29, Alex Artieda, HB9DRI wrote:
Hello Bill
Following your instructions I use your file (looks the same as I use
before) and I place in the properly log directory for each of the
WSJT-X (totally 4) and doesn’t work, the PTT is not share.
I wonder why if in WSJT-X 2.2.2 the PTT com port was share by default
now is not?
Regards
Alex, HB9DRI
*From:* Bill Somerville <g4...@classdesign.com>
*Sent:* Monday, February 15, 2021 6:29 PM
*To:* wsjt-devel@lists.sourceforge.net
*Subject:* Re: [wsjt-devel] FW: BUG in WSJT-X 2.3 and 2.4rc1 COM port
Hi Alex,
try the attached file. It needs to go in the log files directory of
each WSJT-X instance ("Settings->File->Open log directory").
73
Bill
G4WJS.
On 15/02/2021 05:41, Alex Artieda, HB9DRI wrote:
Hello Mike
Sorry I didn’t answer to the list;
I create a file named hamlib_settings.json and paste inside the
code you send me:
{
"config": {
"ptt_share": 1
}
}
Then placethis file in C:\Users\[username]\AppData\Local\WSJT-X
and in
Each of the 4 WSJT-X folders but doesn’t work,
Alex, HB9DRI
*From:* Black Michael via wsjt-devel
<wsjt-devel@lists.sourceforge.net>
<mailto:wsjt-devel@lists.sourceforge.net>
*Sent:* Monday, February 15, 2021 11:11 AM
*To:* wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
*Cc:* Black Michael <mdblac...@yahoo.com> <mailto:mdblac...@yahoo.com>
*Subject:* Re: [wsjt-devel] FW: BUG in WSJT-X 2.3 and 2.4rc1 COM port
The PTT port is no longer shareable by default.
Place this file in C:\Users\[username]\AppData\Local\WSJT-X
{
"config": {
"ptt_share": 1
}
}
Mike W9MDB
On Sunday, February 14, 2021, 07:43:47 PM CST, Alex Artieda,
HB9DRI <hb9...@emeham.com <mailto:hb9...@emeham.com>> wrote:
Just to inform you, I found a bug regarding COM port for PTT, it
appears in WSJT-X 2.3 and in 2.4 RC1, let me explain.
I run 4 WSJT-X at the same time, I use Omnirig to control my
IC9700 but PTT is manage via a COM port, this is a must for me to
TX first a Sequencer via the COM port and later TX the radio, I
cannot use CAT for PTT, that guarantee me no RF spikes etc. 4
WSJT-X plus MAP65 plus WSJT10 are all configure to use COM3 for
PTT, in this configuration I can TX with ANY of the 6 programs,
more precise I can TX with the program were the decodes or best
decode happens, unfortunate since WSJT-X 2.3 and 2.4RC1 I can TX
ONLY with the FIRST program who opens the PTT COM port, the other
ones don’t work and MAP65 give a opening COM port ERROR, the other
WSJT-X simple don’t TX, would be great to fix this bug because
when you run multiple WSJT-X is a must to work with all instance
capable of TX, WSJT-X 2.2.2 works perfect.
To confirm this bug I roll back to 2.2.2 and install 2.3 and later
2.4RC1, the bug appear in 2.3
73 de Alex, HB9DRI
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
