Good afternoon. I am experiencing a problem with what I believe might be an issue with WSJT CI-V addressing.
My environment is WSJT-x version 2.3.1, primarily running FT-8 and FT-4. The PC is an I-7 desktop or an I-7 laptop using Windows 10 Pro version 20H2. The radio is an IC-7300 with version 1.40 firmware. The problem with CI-V addressing occurs while operating in my RV. In this environment, I am using a Tarheel antenna and a "TennaTronix" Tenna Tuner-2 antenna tuner. Because the Tenna Tuner-2 has a hard-coded CI-V address of 70h, I have to change the CI-V address of the 7300 to 70h from 94h and set the configuration of WSJT-x to emulate an IC-7000 Icom radio. When I set WSJT to IC-7000 and change the IC-7300 CI-V address to 70h, I get a good CAT and PTT indications in the Settings screens, but audio tones are not sent to the 7300 when I push the "Tune" soft button on the FT8 screen. Also, the IC-7300's USB-D setting immediately resets to USB. I experience this same problem on the FT4 mode screen. I have successfully defined the environment as an IC-7200 (76h) and an IC-7100 (88h) and everything appears to work properly. Defining the environment as an IC-7300 (94h) also works properly. I appreciate any help you might be able to give me with this problem. Best regards de K9XT. John Deegan 218 Patriots Landing Fillmore, IN 46128-9477 Tel: (317) 846-2979
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
