Also, if you're using the internal soundcard in the rig, make sure you're
on USB-D and not just USB.. If you're not on DATA, the internal soundcard
won't work, and you'll get no power out.
GL es 73
de AI8W, Chris
-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GCS/CM/CC/E/IT/TW d-@ s+:+ !a C++$@ UBLVSCX*++++(on)$>$ P++>$ L+++$ E+@
W++>$ N+++ o+@ K+++ w@ O+@ M-@ V@>$ PS+@ PE@ Y+ PGP++ t+ 5+ X++ R@* tv++
b+>$ DI++ D+ G++ e h r+++ y+++
------END GEEK CODE BLOCK------
On Sun, Apr 25, 2021 at 6:44 AM Bill Somerville <g4...@classdesign.com>
wrote:
> On 23/04/2021 01:56, John Deegan wrote:
>
> Good afternoon. I am experiencing a problem with what I believe might be
> an issue with WSJT CI-V addressing.
>
>
>
> My environment is WSJT-x version 2.3.1, primarily running FT-8 and FT-4.
> The PC is an I-7 desktop or an I-7 laptop using Windows 10 Pro version
> 20H2. The radio is an IC-7300 with version 1.40 firmware.
>
>
>
> The problem with CI-V addressing occurs while operating in my RV. In this
> environment, I am using a Tarheel antenna and a “TennaTronix” Tenna Tuner-2
> antenna tuner. Because the Tenna Tuner-2 has a hard-coded CI-V address of
> 70h, I have to change the CI-V address of the 7300 to 70h from 94h and set
> the configuration of WSJT-x to emulate an IC-7000 Icom radio.
>
>
>
> When I set WSJT to IC-7000 and change the IC-7300 CI-V address to 70h, I
> get a good CAT and PTT indications in the Settings screens, but audio tones
> are not sent to the 7300 when I push the “Tune” soft button on the FT8
> screen. Also, the IC-7300’s USB-D setting immediately resets to USB. I
> experience this same problem on the FT4 mode screen.
>
>
>
> I have successfully defined the environment as an IC-7200 (76h) and an
> IC-7100 (88h) and everything appears to work properly. Defining the
> environment as an IC-7300 (94h) also works properly.
>
>
>
> I appreciate any help you might be able to give me with this problem.
>
>
>
> Best regards de K9XT.
>
>
>
> *John Deegan*
>
> Hi John,
>
> thanks for joining the list. You can override the default CI-V address
> used by WSJT-X/Hamlib by creating a file in the WSJT-X log files directory
> called hamlib_settings.json with the following contents:
>
> {
> "config": {
> "civaddr": "0x70"
> }
> }
>
> That will allow you to use the regular IC-7300 rig setting in WSJT-X with
> your IC-730 switched to CI-V address 70h.
>
> Having said that, I thought the IC-7300 was capable of using a different
> CI-V address on the REMOTE port from the one used on the USB virtual serial
> port for CAT control. You will need to unlink the REMOTE port from the USB
> port in the IC-7300 menu, then set the Ci-V Output (for ANT) menu setting
> to 70h while leaving the main USB virtual port using the default of 94h.
>
> 73
> Bill
> G4WJS.
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
