Transmit start delay - My 2 cents worth: I too have the transmit sequence start delay problem. For me, it started with version 2.4 GA. I did not have the issue with version 2.4 rc4. I also have the problem with version 2.5 rc1. I have about a 1 second transmit delay. I can hear other stations start their xmit cycle for about a second, then mine kicks in. (My clock is pretty accurate, I use a GPS hockey puck to sync time.) It does this on two different radios, one a K3, the other a K3S, on two different computers, both running Windows 10 fully updated. One additional odd symptom, I hear a slight pop in the speaker just before going into transmit. It's like the T/R switching is off slightly. Both radios do this. In Settings/Radio/PTT Method is CAT. In Settings/Radio/Split Operation is Fake It. In Settings/Radio/Mode I normally have it set for Data/Pkt. Both Radios/Computers fail set like this. If I change Settings/Radio/Mode to None, it quits failing, there is no xmit sequence delay, there is no pop in the speaker. But set to None I have no mode set control via CAT, so that's not too great. What changed between 2.4 rc4 and 2.4 GA? Is it the hamlib file? Thanks... 73, Jeff - K5WE
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
