I use an IC-7300 and have noticed the 3-4 second delay issue but it is intermittent. It usually occurs after I have been doing things in Device Manager with my com ports like trying to figure out which port is which. . It is resolved with a computer restart. I then get a TX delay that is imperceptible, presumably the delay I have set in WSJT-X (0.2 msec). Trying to think if it occurs when I connect via the USB port or via a CT-17 as I have both. I usually connect N1MM to the radio via the USB port so I can run at 115200 baud for the spectrum display. I run WSJT-X from within WSJT-X via the remote port at 9600 or 19200 baud. That has been a very stable configuration for me. I have wondered more about Win 10 and my com port drivers than the WSJT-X software itself.
John K7SYS On Wed, Jun 16, 2021 at 2:45 PM w3nzl--- via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > FYI, I too have noticed this phenomena, an I am using an Icom 7300... > Paul, W3NZL > > > -----Original Message----- > From: Black Michael via wsjt-devel <wsjt-devel@lists.sourceforge.net> > To: WSJT software development <wsjt-devel@lists.sourceforge.net> > Cc: Black Michael <mdblac...@yahoo.com> > Sent: Wed, Jun 16, 2021 5:09 pm > Subject: Re: [wsjt-devel] TX start delay > > Working on it...seems unique to K3/K3S but one other Icom user is > complaining too... > > Mike W9MDB > > > > > On Wednesday, June 16, 2021, 03:32:19 PM CDT, Joe Taylor < > j...@princeton.edu> wrote: > > > Hi Mike, > > I assume these recent complaints about "Tx start delay" are the result > of hamlib changes affecting certain rigs. Is this correct? Do you > understand just what changes caused the problem, and do you have a fix > in preparation? Let me know... > > -- Joe, K1JT > > On 6/15/2021 6:08 PM, Black Michael via wsjt-devel wrote: > > What rig? > > > > Mike W9MDB > > > > On Tuesday, June 15, 2021, 05:06:26 PM CDT, Ned <a...@cox.net> wrote: > > > > Befuddled. I noticed that the TX start on FT8 using v2.4.0 seemed late > > soon after I upgraded months ago. I always felt like I had taken a step > > back in performance with v2.4.0 and decided to look at into it today. > > > > I measured the TX start delay today and it was like 4 to 5 seconds. When > > I run v2.3.0 on the same computer using the same configuration I get no > > detectable delay. When I use v2.5.2rc1 on the same computer with the > > same configuration I get the same 4 to 5 second delay. When I use JTDX > > which is based on v 2.4.0, I get the same 4 to 5 second delay. I see a > > slight delay in one of the other stations in the shack on v 2.4.0 but > > not as much as my main station. The main station is an i5 that with 8 G > > available RAM. I have not tried other modes, but I am running v2.3.0 > > until I get an inspiration about what to try to address this. I get the > > same delay whether I use the VOX, CAT or DTR/RTS PTT interface. The > > audio starts in the TX sequence at the same time I get the command to > > PTT...always 4 to 5 seconds late. > > > > Thoughts? > > > > Ned / AA7A > > > > > > > > _______________________________________________ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net <mailto: > wsjt-devel@lists.sourceforge.net> > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > <https://lists.sourceforge.net/lists/listinfo/wsjt-devel> > > > > > > _______________________________________________ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
