All, Before everyone starts yelling at me I got confused. It is when I run WSJT-X 2.4 standalone on the remote port at 9600 or 19200 baud that I have seen the delay issue resolved by a computer restart. When I run WSJT--X 2.4 from within N1MM at 115200 I have no problems.
John On Wed, Jun 16, 2021 at 3:20 PM John Kludt <johnnykl...@gmail.com> wrote: > I use an IC-7300 and have noticed the 3-4 second delay issue but it is > intermittent. It usually occurs after I have been doing things in Device > Manager with my com ports like trying to figure out which port is which. . > It is resolved with a computer restart. I then get a TX delay that is > imperceptible, presumably the delay I have set in WSJT-X (0.2 msec). Trying > to think if it occurs when I connect via the USB port or via a CT-17 as I > have both. I usually connect N1MM to the radio via the USB port so I can > run at 115200 baud for the spectrum display. I run WSJT-X from within > WSJT-X via the remote port at 9600 or 19200 baud. That has been a very > stable configuration for me. I have wondered more about Win 10 and my com > port drivers than the WSJT-X software itself. > > John K7SYS > > On Wed, Jun 16, 2021 at 2:45 PM w3nzl--- via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > >> FYI, I too have noticed this phenomena, an I am using an Icom 7300... >> Paul, W3NZL >> >> >> -----Original Message----- >> From: Black Michael via wsjt-devel <wsjt-devel@lists.sourceforge.net> >> To: WSJT software development <wsjt-devel@lists.sourceforge.net> >> Cc: Black Michael <mdblac...@yahoo.com> >> Sent: Wed, Jun 16, 2021 5:09 pm >> Subject: Re: [wsjt-devel] TX start delay >> >> Working on it...seems unique to K3/K3S but one other Icom user is >> complaining too... >> >> Mike W9MDB >> >> >> >> >> On Wednesday, June 16, 2021, 03:32:19 PM CDT, Joe Taylor < >> j...@princeton.edu> wrote: >> >> >> Hi Mike, >> >> I assume these recent complaints about "Tx start delay" are the result >> of hamlib changes affecting certain rigs. Is this correct? Do you >> understand just what changes caused the problem, and do you have a fix >> in preparation? Let me know... >> >> -- Joe, K1JT >> >> On 6/15/2021 6:08 PM, Black Michael via wsjt-devel wrote: >> > What rig? >> > >> > Mike W9MDB >> > >> > On Tuesday, June 15, 2021, 05:06:26 PM CDT, Ned <a...@cox.net> wrote: >> > >> > Befuddled. I noticed that the TX start on FT8 using v2.4.0 seemed late >> > soon after I upgraded months ago. I always felt like I had taken a step >> > back in performance with v2.4.0 and decided to look at into it today. >> > >> > I measured the TX start delay today and it was like 4 to 5 seconds. When >> > I run v2.3.0 on the same computer using the same configuration I get no >> > detectable delay. When I use v2.5.2rc1 on the same computer with the >> > same configuration I get the same 4 to 5 second delay. When I use JTDX >> > which is based on v 2.4.0, I get the same 4 to 5 second delay. I see a >> > slight delay in one of the other stations in the shack on v 2.4.0 but >> > not as much as my main station. The main station is an i5 that with 8 G >> > available RAM. I have not tried other modes, but I am running v2.3.0 >> > until I get an inspiration about what to try to address this. I get the >> > same delay whether I use the VOX, CAT or DTR/RTS PTT interface. The >> > audio starts in the TX sequence at the same time I get the command to >> > PTT...always 4 to 5 seconds late. >> > >> > Thoughts? >> > >> > Ned / AA7A >> > >> > >> > >> > _______________________________________________ >> > wsjt-devel mailing list >> > wsjt-devel@lists.sourceforge.net <mailto: >> wsjt-devel@lists.sourceforge.net> >> > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > <https://lists.sourceforge.net/lists/listinfo/wsjt-devel> >> > >> > >> > _______________________________________________ >> > wsjt-devel mailing list >> > wsjt-devel@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> > >> >> >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
