Can you please try the latest hamlib and see if it's fixed now?
Mike W9MDB
On Tuesday, September 28, 2021, 04:51:21 PM CDT, Marco Calistri
<[email protected]> wrote:
Il 28/09/21 18:08, Black Michael ha scritto:
> #1 Does the rig behave when NOT running cqrlog?
> #2 Please run rigctld like this, duplicate the problem, and send me
> the log.txt file
> rigctld -m 1021 --vfo -vvvvv -Z >log.txt 2>&1
>
> Mike W9MDB
>
>
>
Hi Mike,
Yes, CQRLOG is not affecting at all in these behaviors.
In attachment the two logs:
1 - *rigctld.usb.log.txt *produced when selecting "NET rigctl" into
WSJT-X: result is that no AFSK is generated and FT-100 just switch the
PTT on/off.
2 - *FT-100ctld.usb.log.txt* produced when selecting FT-100 as Rig into
WSJT-X. In this case I tried to change band from 10 to 17 meters and
going back to 10 meters and the result is that *_only_* the receiving
VFO changes correctly though WSJT-X commands, while the transmitting VFO
holds on 10 meters initial frequency.
So yes, both issues are still present independently of CQRLOG and as I
told, they are news issues since the newer software versions
(hamlib/wsjt-x) has been released.
Regards,
--
*73 de Marco, PY1ZRJ (former IK5BCU)*
** _______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
