Il 04/11/21 19:49, Black Michael ha scritto:
And what rig is this?
VFOA moves just like VFOB does in split so shouldn't make any
difference in F/H mode.
Mike W9MDB
On Thursday, November 4, 2021, 05:26:18 PM CDT, Marco Calistri via
wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
Hello Mike,
My answers inline.
Il 04/11/21 09:35, Black Michael via wsjt-devel ha scritto:
I'm trying to solve rig split operation problems with Yaesu rigs and
need some Yaesu operator help...
I need any Yaesu owners to state their rig model and whether or not
"Rig split" works in WSJT-X or if you see flashing on the rig when
Rig split is turned on.
So 3 questions
#1 Can you make QSOs? *Yes*
#2 Does rig operation look smooth? Should be a little activity as
freq & mode get set on both VFOs but it I'd like to know if the
display goes a little nuts when it's happening with Rx/Tx flickering
or such. *Yes*
Mike W9MDB
*Additional notes: *Split works well here but lately, in order to be
able to work some of the latest DX Expeditions, I switched this option
to "FAKE-IT" due the fact that otherwise, when I'm into F/H mode using
"SPLIT" my VFO moves too much off from the FOX station frequency.
As you probably may remind, I cannot use USB mode here if use hamlib
net rigctl, just DIG-MODE in this case otherwise the TX audio mutes.
Oh, sorry Mike, I omitted the rig! It is the *YAESU FT-100*.
What I faced here is that when using F/H and split option set to
*SPLIT*, my RX VFO was moving too much off from the FOX station TX
frequency so that I couldn't receive his signal anymore.
It took me some failed attempts to discover this fact and when finally I
switched split option to *FAKE-IT*, the problem has stopped.
---
*73 de Marco, PY1ZRJ (former IK5BCU)*
**
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
