Hi Mike,
Sorry about side tracking this subject.
On the TS590S, Split gets turned on as soon as the receive VFO is not the same
as the transmit VFO.So as soon as you set FR1 after you set FT0, split gets
turned on.
You are absolutely correct about not being able to target the VFO when setting
the mode on the TS590S(G).Dumb but true.
And far be it from me to tell you how to code this, I was just trying to let
you know about the errant behavior that I found. However, you may want to
consider the following logic:
Test the Split indicator in the IF message.
If its on, you can bypass the need to set FR0 and FT1.
The reality is that you really don't need to do that anyway if you also follow
the logic below. Send the command 'FT' to find the VFO that is going to
transmit.Set FR to the same as FT, then set the mode (MD) and data (DA).
Now Set FR to be not equal to FT then set the mode (MD) and data (DA).
As per your previous explanations, interleave the 'ID' command as necessary.
Now you send the 'TX1' command.
I believe that might be a cleaner more efficient process and if the useruses
VFO-B to start, this process that will not change that setting. Theywill always
receive on the VFO they selected.
Again my apologies for sidetracking this topic.
73,
Sam W2JDB
-----Original Message-----
From: Black Michael <mdblac...@yahoo.com>
To: wsjt-devel@lists.sourceforge.net <wsjt-devel@lists.sourceforge.net>; Sam
W2JDB <w2...@aol.com>
Sent: Wed, Nov 17, 2021 8:06 am
Subject: Re: [wsjt-devel] VFOs reversing
This thread has side tracked.What rig are you running? Is it possible to set a
different mode on VFOB? If not we can put some logic in to avoid setting mode
on VFOB. Most rigs can set VFOB to a separate mode but older rigs do not have
targetable mode.
FR1 is not supposed to turn on split on most rigs...it's a VFO change. FT is
what turns on split.The FR1 is changing to VFOB to set the mode and to avoid
strange rig flashing we do this:split offchange to vfobset mode change to
vfoasplit on
Mike W9MDB
On Tuesday, November 16, 2021, 11:57:10 PM CST, Sam W2JDB via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
Hi Bill and MIke,
"and/or If Split is already set in the radio."
Please disregard the comment about the current Split status of the rig. I
forgot that in the response to the 'IF;' command, that message contains the
split indication.My apologies.
73,
Sam W2JDB
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
