Hi Peter The example file 000000_0003.wav in the link I sent is a simulated file, with DT set to 2.5s as for an EME signal.
Try it with Ftol=100Hz and it should decode both signals OK. For me, on one quick test, with Ftol=1000 encompassing both signals only one decoded. 73 Charlie On Tue, 4 Jan 2022 at 20:53, Peter Sumner via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Hi Charlie, > may I ask were the Q65-60D recordings were EME or terrestrial ? I have > found that with Q65 it is quite dependent on the 'decode after eme delay' > setting as to whether the signal decodes or not. > > After more testing last night, I found the samples from Lance W7GJ that > decoded in Q65-60A but required me to have 'decode after eme delay' ticked > which had me foxed for a few minutes. > > So far I have had no luck with any of the Q65-30A samples decoding, on air > observations are the decoder works for one signal only. Checked again to be > sure and the 'single decode' option is not enabled. If I go back and > click on each signal I get a decode. > > It is behaving like the decoder is in DEEP mode even though FAST is > selected. > > Regards, > Peter, vk5pj > > > Regards, > Peter vk5pj > > On Tue, Jan 4, 2022 at 9:18 PM Charles Suckling via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > >> Hi Peter >> >> This link has some Q65 examples, including simulated one with two >> different Q65-60D signals in the passband. >> >> Make sure of course that you have 'single decode' in main settings >> unchecked (!). >> >> >> https://drive.google.com/drive/folders/1RMdrOT7SVIrTDz4hMdmzZkfXJ2daf0yu?usp=sharing >> >> 73 >> >> Charlie G3WDG >> >> >> >> On Tue, 4 Jan 2022 at 10:24, Peter Sumner via wsjt-devel < >> wsjt-devel@lists.sourceforge.net> wrote: >> >>> Hi, >>> at some point the Q65 decoder engine has stopped showing decodes from >>> multiple signals in the WSJT-X passband and I am at a loss to explain how >>> or when this has occurred. >>> >>> I have downloaded the sample files from the main Pulsar web site and >>> tried to follow the Q65 quick start guide to no avail. >>> >>> At this point none of the Q65-30A sample WAV files produce a decode for >>> me, the single sample for Q65-60A seems to have two signals but can not get >>> either to decode no matter what combination of Fast, Deep or Normal I have >>> tried. >>> >>> While I have successfully had some Q65 contacts to the USA today from >>> Australia, it is making me doubt the results of the decoder. >>> >>> Does anyone in the group have some proven Sample WAV files with multiple >>> stations in a period I could try? (other than the ones from the WSJT-X web >>> site) >>> >>> So far tried WSJT-X version, 2.4, 2.50, 2.51 and 2.54 with the >>> same result. I know this used to work for me as in June July it was doing >>> multi pass decoding on the openings to the EU and was working on EME during >>> the recent W7GJ trip away. >>> >>> I am leaning to this being a problem with a windows update as going back >>> and testing with v2.4 should have given me good results but alas no >>> >>> Still scratching my head. >>> >>> Regards, >>> Peter, vk5pj >>> _______________________________________________ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >>> >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
