I'll get you that log later today. What verbose level do you need on rigctld (how many v)?
Thanks Hrafnkell TF3HR On Thu, Jun 23, 2022 at 1:44 PM Black Michael via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > And if CAT PTT still fails I need to see debug info -- add ">log.txt 2>&1" > to the rigctld line. > > rigctld --model=3011 --rig-file=/dev/ttyUSB0 --serial-speed=4800 > --port=4532 --set-conf=stop_bits=1,dtr_state=ON,rts_state=ON > --ptt-file=/dev/ttyUSB1 --ptt-type=RTS -Z >log.txt 2>&1 > > Then send me the log file. > > Mike W9MDB > > > > > > > On Thursday, June 23, 2022 at 08:19:19 AM CDT, Hrafnkell Eiriksson via > wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: > > > It works fine when I'm running WSJT-X on the same computer as hamlib > rigctld and I can set it to access the serial port directly for PTT. > But in this case I'm running WSJT-X on Windows but running hamlib rigctld > on a Raspberry Pi. WSJT-X does not have access to the /dev/ttyUSB* on the > raspberry pi. > The communication between WSJT-X and hamlib happens over a network. So I'm > expecting the hamlib code in WSJT-X to delegate the PTT to hamlib as a > rig_set_ptt command that then turns into a network message and the rigctld > backend then performs a PTT. > > Browsing the code shows that there HamlibTranceiver::do_ptt() does indeed > call rig_set_ptt. > > Is it possible that WSJT-X is trying to open a local COM port on windows > when setting up the communication to hamlib even though it is not set to > use DTR or RTS PTT? > Could it be that the code still tries to open a local COM port even though > the rig control is set to a network server and PTT is selected as CAT? > > Thanks for your help > Hrafnkell TF3HR > > On Thu, Jun 23, 2022 at 12:06 PM Black Michael via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > > WSJT-X has to be set up to use the same RTS keying and the the > /dev/ttyUSB1 port. > > Just tested it here and it uses it correctly (though I tested on Windows). > > Mike W9MDB > > > > > > > > On Thursday, June 23, 2022 at 03:53:35 AM CDT, Hrafnkell Eiriksson via > wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: > > > > Why do you have rst_state=ON? That conflicts with ptt-type=RTS and > might be why it's not working. > I have rts_state and dts_state ON to power the CAT cable. The --set_conf > option only seems to apply to the rig-file device, not the ptt device. I > can remove the rts_state=ON, it has no effect on PTT > > PTT over hamlib is working, it's just WSJT-X that is not using it. I can > use e.g. a voice keyer in Log4OM and it does PTT properly through hamlib. > > 73 de Hrafnkell TF3HR > > On Wed, Jun 22, 2022 at 11:07 PM Black Michael via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > > The 706MKIIG does not do CAT PTT per se but the ptt-type=RTS should work. > > Why do you have rst_state=ON? That conflicts with ptt-type=RTS and might > be why it's not working. > > And dtr_state=ON would only be needed if your CAT cable needs power from > the computer to work. > > Mike W9MDB > > > > > On Wednesday, June 22, 2022 at 11:35:27 AM CDT, Hrafnkell Eiriksson via > wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: > > > Hi > > I'm running WSJT-X v2.5.4 on a Win10 computer. > I've set up hamlib rigctld (version 4.4) on a Raspberry Pi and connected > it to my Icom706mk2g. > I'm using two com ports from the RPi, one for CAT control and one for PTT. > I've set WSJT-X to use hamlib for rig control and pointed it to the > ip:port of my RPi. > > Test CAT works fine and WSJT-X can set and read the frequency if I have > PTT method set to Vox. > If I set PTT method to CAT then Test CAT fails with the error: > Rig failure > Hamlib error: IO error > network.c(441):network_close return(0) > iofunc.c(361):port_close return(0) > rig.c(1047):rig_open return(-6) IO error > network.c(441):network_close return(0) > iofunc.c(361):port_close return(0) > iofunc.c(361):port_close return(0) while opening connection to rig > > I can use the hamlib CAT PTT from other software such as Log4OM without > issues. > I would expect CAT PTT with hamlib rigcontrol in WSJT-X to behave the > same, that is use hamlib calls to do PTT. > > My rigctld command line is > rigctld --model=3011 --rig-file=/dev/ttyUSB0 --serial-speed=4800 > --port=4532 --set-conf=stop_bits=1,dtr_state=ON,rts_state=ON > --ptt-file=/dev/ttyUSB1 --ptt-type=RTS -Z > > Am I setting something wrong or misunderstanding something? > > Thanks > Hrafnkell TF3HR > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
