I think all you need to do is configure the WSJT audio to use the audio channel that goes to you transmitter for transit, and connect the WSJT audio receive channel to the SDR audio. You may have to use a virtual audio channel. It’s difficult to suggest a detailed set up without knowing the specific equipment you want to use.
Look at you WSJT setup tab and see what sources you have listed. Sent from my iPad > On Aug 21, 2022, at 2:20 PM, Pino Zollo via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > Please how could I configure wsjtx to receive via an SDR dongle and > transmit via a regular radio....(IC-706 in > > my case) ? > > If not possible, please, consider it as a future improvement. > > This is very useful on the low bands... e.g. on 630m the IC-706 transmits > something...but its RX is > > undefined. > > On the contrary my RTL-SDR with proper filters should be better. > > 73 > > Pino ZP4KFX > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
