Hi Russ, You seems to hit the nail. I did not checked modes JT65 and Q65 and those use a frequency tolerance in User Guide 10.4. Center:
* For modes lacking a multi-decode feature, or when Enable VHF/UHF/Microwave features has been checked on the File → Settings → General tab, the F Tol control sets a frequency tolerance range over which decoding is attempted, centered on the Rx frequency. It does not mention the waterfall at all, hi! 73, Reino OH3mA From: k2txb--- via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net] Sent: 5. huhtikuutata 2023 21:46 To: 'Black Michael' <mdblac...@yahoo.com>; 'WSJT software development' <wsjt-devel@lists.sourceforge.net> Cc: k2...@comcast.net Subject: Re: [wsjt-devel] Truncated Waterfall Display "Feature" Sorry folks, I agree it would seem that way. But only because there is no way to set the decoding window if you cannot see it. I did not think of that, when I dashed off that message this morning. And actually, if you set the decoding window large enough, I still think it would decode signals outside the waterfall range. For example, I set the range to 1000, and center frequency to 1400 Hz. That will now decode anything from 400 to 2400 Hz. I still do not believe you need to be able to see it, to decode it. Also… I routinely run my system with bins/pixel set to 2. With the low end set to 200 Hz, it shows me everything up to 2600 Hz. That is almost always sufficient. Don’t see any advantage to asking for a default setting greater than that. Russ K2TXB From: Black Michael via wsjt-devel <wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > Sent: Wednesday, April 5, 2023 12:47 PM To: k2txb--- via wsjt-devel <wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > Cc: Black Michael <mdblac...@yahoo.com <mailto:mdblac...@yahoo.com> > Subject: Re: [wsjt-devel] Truncated Waterfall Display "Feature" Not true -- you only decode what's in the waterfall. Mike W9MDB On Wednesday, April 5, 2023 at 11:41:35 AM CDT, k2txb--- via wsjt-devel <wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > wrote: Dwane, I am almost certain that your assumption in incorrect. For WSJT in general, it does not matter what the settings for the waterfall display are set to. They have nothing to do with decoding, they provide only visual signal recognition. So, if there is a decodable signal above the 1500 Hz it will still decode. It is much more important to make sure his receiver bandwidth is wide enough to pass the signal at that frequency. 73, Russ K2TXB -----Original Message----- From: Dwayne Sinclair via wsjt-devel <wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > Sent: Wednesday, April 5, 2023 11:35 AM To: WSJT software development <wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > Cc: Dwayne Sinclair <dwayne_sincl...@me.com <mailto:dwayne_sincl...@me.com> > Subject: [wsjt-devel] Truncated Waterfall Display "Feature" Last night, I met an operator who was struggling with EME on 23CM after abandoning EME on the 70CM band. As soon as he started up WSJT-X, I noted his waterfall display was set to Bins/Pixel 2 instead of 5/6 and less than 1500Hz was displayed on the screen. All decodes 1500Hz and up were not decoded. I am pretty sure this was the cause of his issues on 70CM together with his current issues on 23CM and the “lack of decodes” as he complained. I have to ask - Can we fix this so that irrespective of what the Waterfall window displays, decodes will still occur for the full 3KHz or whatever value is specified in advanced options. 73 Dwayne AB6A _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
