Turns out Task Manager shows different memory usage then the System Informer I use and also Process Explorer.
System Informer says 444MB but Task Manager says 44MB on a clean config (no rig selected or anything done). Process Explorer shows 450MB. So I don't believe Task Manager is correct at all. In any case there's no memory leak -- just inaccurate memory reporting. Mike W9MDB On Friday, May 26, 2023 at 08:56:48 AM CDT, Hasan N0AN via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: Around 125 MB, consistent with changing configurations (separate configs for each mode). FT8, MSK144, FT8,...all around 125 MB starting. Q65 127 MB after about 2 hours of operation, so it is essentially the same. We checked with our zoom group, we are all running WSJT-X 2.7.0 RC1 Improved Plus by Uwe: KB7IJ, K5GZR, NM3G, W8LMG, WB4HIE and I all reported approximately 125 MB initially and 125 MB after two hours of MSK144 and Q65 operation. One station, ND0B was reporting approx. 600 MB upon startup ...but he attributes that to a gigantic *.adi file, that he thinks is loaded upon startup? So, 125 MB appears to be the baseline for most of us (no matter what mode), with one outlier, ND0B. 73, N0AN Hasan On Thu, May 25, 2023 at 8:16 PM Joe Taylor via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: > Hi Björn, > > I have not been able to reproduce anything like the behavior you > describe. For one example, I started WSJT-X in FT8 mode, monitoring a > fairly busy 15 m band. Memory usage reported by Windows TaskManager > over the first ~5 hours looks like this: > > UTC Memory > -------------- > 1930 97.1 MB > 1950 99.5 > 2140 96.0 > 0105 94.2 > > So far, I have seen no evidence of any memory leak. > > -- 73, Joe, K1JT > > > On 5/25/2023 3:49 PM, Brian Moran via wsjt-devel wrote: >> Greetings; can you describe what mode you are using? If you left it going >> for a few days without deciding any signals (e.g. with no antenna) same >> behavior? What radio and interface to the radio? Any other information you >> could share would be most appreciated. >> >> Thanks! >> -Brian N9ADG >> >> >> Sent via iPhone >> >>> On May 25, 2023, at 12:11 PM, Björn Ekelund via wsjt-devel >>> <wsjt-devel@lists.sourceforge.net> wrote: >>> >>> >>> My RAM (8 Gbyte) fills up if I let rc1 run for a few days. It does not >>> happen with 2.6.1. >>> >>> Interestingly enough the task manager does not show WSJT-X to be the >>> culprit but when >>> I stop it, up to 5Gbyte are freed up. >>> >>> Also, sometimes rc1 allocates 630Mbyte of RAM when started. Other times >>> 90Mbyte. It seems random. >>> >>> 2.6.1 is always around 90Mbyte. >>> >>> I am running Swedish Windows. >>> >>> Does anyone else experience the same anomalies? >>> >>> Björn SM7IUN >>> >>> _______________________________________________ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
