Quick test on a W10 Intel laptop with no rig connected shows 94MB used.
Alan G0TLK
On 26/05/2023 14:22, Fred Price via wsjt-devel wrote:
I started 2.7.0-rc1 Windows 11 Ryzen 5 task manager shows 473mb for WSJT.exe.
I then closed 2.7.0-Tx1 and opened 2.6.1 task manger shows 147mb for WSJT.exe.
Both were opened on a pretty quiet 6M band.
I let 2.7.0-rc1 run for around 4 hours this morning with no memory leaks. My
settings for save menu are:
None
Disable writing of ALL.TXT.
On May 25, 2023, at 3:54 PM, Brian Moran via
wsjt-devel<wsjt-devel@lists.sourceforge.net> wrote:
Greetings; can you describe what mode you are using? If you left it going for
a few days without deciding any signals (e.g. with no antenna) same behavior?
What radio and interface to the radio? Any other information you could share
would be most appreciated.
Thanks!
-Brian N9ADG
Sent via iPhone
On May 25, 2023, at 12:11 PM, Björn Ekelund via
wsjt-devel<wsjt-devel@lists.sourceforge.net> wrote:
My RAM (8 Gbyte) fills up if I let rc1 run for a few days. It does not happen
with 2.6.1.
Interestingly enough the task manager does not show WSJT-X to be the culprit
but when
I stop it, up to 5Gbyte are freed up.
Also, sometimes rc1 allocates 630Mbyte of RAM when started. Other times
90Mbyte. It seems random.
2.6.1 is always around 90Mbyte.
I am running Swedish Windows.
Does anyone else experience the same anomalies?
Björn SM7IUN
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel