Once when using a microsoft C compiler in windows 7 a memory leak appeared..
The person i was working with blamed it on the fact that i was using pointers. BUT Once we reduced down to the minimum code that produced the leak it contained no pointers. It was caused by only that compiler. It was used to collect data on a lifetest of 30 lasers over time. We determined with the largest memory we could install it would fail in 5 weeks. So we said that once a month we needed to take the system down to measure and calibrate signal paths and detector drift. Is it compiler dependent? > On 05/26/2023 9:45 AM EDT Black Michael via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > > 2.6.1 gives me the same 450MB on a clean AppData\Local\WJST-X setup. > > Mike W9MDB > > > > > > > > > On Friday, May 26, 2023 at 08:30:02 AM CDT, Fred Price via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > > > > > I started 2.7.0-rc1 Windows 11 Ryzen 5 task manager shows 473mb for WSJT.exe. > I then closed 2.7.0-Tx1 and opened 2.6.1 task manger shows 147mb for > WSJT.exe. > Both were opened on a pretty quiet 6M band. > I let 2.7.0-rc1 run for around 4 hours this morning with no memory leaks. My > settings for save menu are: > None > Disable writing of ALL.TXT. > > > On May 25, 2023, at 3:54 PM, Brian Moran via wsjt-devel > > <wsjt-devel@lists.sourceforge.net> wrote: > > > > Greetings; can you describe what mode you are using? If you left it going > > for a few days without deciding any signals (e.g. with no antenna) same > > behavior? What radio and interface to the radio? Any other information you > > could share would be most appreciated. > > > > Thanks! > > -Brian N9ADG > > > > > > Sent via iPhone > > > >> On May 25, 2023, at 12:11 PM, Björn Ekelund via wsjt-devel > >> <wsjt-devel@lists.sourceforge.net> wrote: > >> > >> > >> My RAM (8 Gbyte) fills up if I let rc1 run for a few days. It does not > >> happen with 2.6.1. > >> > >> Interestingly enough the task manager does not show WSJT-X to be the > >> culprit but when > >> I stop it, up to 5Gbyte are freed up. > >> > >> Also, sometimes rc1 allocates 630Mbyte of RAM when started. Other times > >> 90Mbyte. It seems random. > >> > >> 2.6.1 is always around 90Mbyte. > >> > >> I am running Swedish Windows. > >> > >> Does anyone else experience the same anomalies? > >> > >> Björn SM7IUN > >> > >> _______________________________________________ > >> wsjt-devel mailing list > >> wsjt-devel@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > > > > _______________________________________________ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
