Try running this simple web app from your browser, 
you will know right away whether your computers clock is synced to UTC.

https://time.is/

Dave - wb9own
     On Tuesday, December 5, 2023 at 08:17:28 AM CST, robert evans LAST_NAME 
via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:  
 
   All good suggestions. Thank You.       Last night..   Double checked 
everything on the old dell i3 win10   and it started decoding just fine.       
The thing is, that it is so slow, i loose track of what   i did and didn't do 
when i make changes.       And it takes forever to reboot.       I keep it 
around because it is about the bare   minimum system to support the usb drivers 
  now used by windows for modern radios.   ft-991, ft-dx10, ic-9700, ic-705, 
etc. etc. etc.       So, as a beta test of WSJT-X 2.7.0-rc2 on a   old dell i3 
win10 with the IC-705 it worked fine.           Back to the asus win11 i9 
laptop / IC-705 :   When WSJT-X 2.7.0-rc2 did decode the   dt was like 0.2 or 
less.   I'll revisit that soon.       Thanks Again.   N2LO~>              
  On 12/05/2023 3:52 AM EST Kari Sillanmäki via wsjt-devel 
<wsjt-devel@lists.sourceforge.net> wrote:           OM,       Also make sure 
that you are not in "Hound" mode with the "Rx All Freqs" unchecked.       73's 
de Kari, oh2gqc       On 12/4/23 20:57, robert evans LAST_NAME via wsjt-devel 
wrote:  
   Using a IC-705 over the weekend and after 
installing the usb drivers in a asus win11 
i9 laptop i started WSJT-X 2.7.0-rc2.       The rig control worked fine and the 
signals 
where being displayed in the spect graph, 
but no decodes. Double checked the time set. 
Still no decodes.       Walked away for many minutes and there were 
decodes when i got back, but only a few.   Installed WSJT-X 2.6.1 and tried 
again.   Same behavior.       Every once in a awhile it would decode a 
frame and then none for long periods of 
time even though the spectrum graph showed 
signals on the waterfall continuously.       Switched to an old dell i3 win10 
laptop 
and saw the same behavior with wsjt-x.   Tried fldigi and it decoded Olivia and 
psk31 as well as cw no problem.       Tried JS8 as well - no problem.       
Back to WSJT-X and double checked the 
settings. Every once in a long while 
it might decode what looks like a frame.       N2LO~>           
 
 _______________________________________________wsjt-devel mailing 
listwsjt-devel@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/wsjt-devel
 
 
 
 _______________________________________________ 
wsjt-devel mailing list 
wsjt-devel@lists.sourceforge.net 
https://lists.sourceforge.net/lists/listinfo/wsjt-devel 
 _______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to