Hi David As far as I know, this hasn't been reported before.
I've been running SDRC to drive QMAP now for some time here, pretty much since SDRC build 3117 came out, and also haven't seen this behaviour. The only problem I had, at first, was to have SDRC's demodulated audio outputting to the same audio 'port' as WSJT-X uses for transmitting, cured by muting SDRC. It did not result in loss of signal to QMAP as you are seeing. What level do you see on QMAP's thermometer normally? What operating system are you running? 73 Charlie DL3WDG On Tue, 19 Dec 2023 at 03:00, David Hilton-Jones via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > I am using rc2, SDRconsole with RSPDx, and QMAP > > > Today, all was running fine. I clicked on a station in “Active stations”, > and WSJT-x took me to transmit, and the QSO ran as normal. > > However, after my first transmit period, on return to receive, QMAP was > showing no input signal, whilst SDRconsole was displaying normally. WSJT-x > was working normally. I closed QMAP, and re-opened it, then it was working > again. > > I obviously need to try again a few more times, but didn’t have time today. > > Any thoughts? > > David, G4YTL > > Sent from the all-new AOL app for iOS > <https://apps.apple.com/us/app/aol-news-email-weather-video/id646100661> > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
