Hi David I will have a look here also. I am not familiar with those settings, yet, in SDRC. I more or less used it 'out of the box'.
73 Charlie On Tue, 19 Dec 2023 at 11:35, David Hilton-Jones via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Many thanks Charlie > > > > Done some further testing this morning and I think I have a partial > explanation/solution. > > > > Windows 10 > > > > WSJT-X rc2 > > QMAP > > SDRC > > RSPDx > > > > No moon to play with at the moment, but just played with hitting “Tune” in > WSJT-X. > > > > If the auto-mute in DRC is off, then there is no problem. The QMAP > thermometer reads ~48db. > > > > If auto-mute is on, AND the Peak and Mean options are set to -20db or > lower, then QMAP does not recover when going to receive. Thermometer is > zero. Have to exit and reload QMAP then OK. > > > > BUT, if Peak and Mean set to 0db, then after transmit QMAP returns to > receive as normal. > > > > Will be interesting to see if you can duplicate. > > > > 73 > > > David > > > > *From:* Charles Suckling via wsjt-devel [mailto: > wsjt-devel@lists.sourceforge.net] > *Sent:* 19 December 2023 05:33 > *To:* WSJT software development > *Cc:* Charles Suckling > *Subject:* Re: [wsjt-devel] QMAP query > > > > Hi David > > > > As far as I know, this hasn't been reported before. > > > > I've been running SDRC to drive QMAP now for some time here, pretty much > since SDRC build 3117 came out, and also haven't seen this behaviour. > > > > The only problem I had, at first, was to have SDRC's demodulated audio > outputting to the same audio 'port' as WSJT-X uses for transmitting, cured > by muting SDRC. It did not result in loss of signal to QMAP as you are > seeing. > > > > What level do you see on QMAP's thermometer normally? > > > > What operating system are you running? > > > > 73 > > > > Charlie DL3WDG > > > > On Tue, 19 Dec 2023 at 03:00, David Hilton-Jones via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > > I am using rc2, SDRconsole with RSPDx, and QMAP > > > > > Today, all was running fine. I clicked on a station in “Active stations”, > and WSJT-x took me to transmit, and the QSO ran as normal. > > > > However, after my first transmit period, on return to receive, QMAP was > showing no input signal, whilst SDRconsole was displaying normally. WSJT-x > was working normally. I closed QMAP, and re-opened it, then it was working > again. > > > > I obviously need to try again a few more times, but didn’t have time today. > > > > Any thoughts? > > > > David, G4YTL > > Sent from the all-new AOL app for iOS > <https://apps.apple.com/us/app/aol-news-email-weather-video/id646100661> > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
