Mike,
It fails with the same error message if "Network Server" is blank.
Localhost (127.0.0.1) is not a valid ip address for a radio and port
4992 is not serviced by either SSDR or SSDR CAT on the PC.
Radio ip address:4992 or radiohostname:4992 does work.
AL, K0VM
On 7/1/2024 4:40 PM, Black Michael via wsjt-devel wrote:
It sounds like you have a value in the "Network Server" box which you
should not need for the Slice rigs.
Mike W9MDB
On Monday, July 1, 2024 at 04:31:15 PM CDT, Bill Barrett via
wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
Hello Al-
I had the same error when selecting the Slice A option.
Went back to Flex XXX
Hope this helps.
Bill W2PKY
On Mon, Jul 1, 2024 at 5:20 PM k0vm via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
( wsjt-x-rc5/Hamlib 2024-06-30-T21:25Z, Flex 6600, SSDR 3.7.4)
1) When upgrading from RC4 ( which was running Flex 6xxx hamlib),
rig selection was changed from Flex 6600 to ADT-200A.
2) Selecting SmartSDR slice A for rig results in Hamlib error..
Setting network ser5ver to 192.168.7.166:4992
<http://192.168.7.166:4992> does work...
3) selecting rig flex 6xxx does work with original server ip/port
AL, K0VM
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
