When I installed the new rc5 software last night I tried the 6000 Slice A. Based on the message i received I entered just the IP address of my radio no port (looks like it was appending port 4992) and it seemed to work from there.
Michael, AA5SH On Tue, Jul 2, 2024 at 10:07 AM Bill Barrett via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Hello Mike- > > Good to know there are settings for SSDR, is there a tutorial on how to > use these new settings. > Could not find anything in the Ver 2.7 User Guide. > > Thanks; > Bill W2PKY > > On Tue, Jul 2, 2024 at 10:15 AM Black Michael via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > >> What software are you using for the Flex? >> >> This was made for the current version of SmartSDR. >> >> Mike W9MDB >> >> >> >> >> >> >> >> >> On Tuesday, July 2, 2024 at 09:08:44 AM CDT, k0vm via wsjt-devel < >> wsjt-devel@lists.sourceforge.net> wrote: >> >> >> >> >> >> >> >> >> Mike, >> It fails with the same error message if "Network Server" is blank. >> Localhost (127.0.0.1) is not a valid ip address for a radio and port 4992 >> is not serviced by either SSDR or SSDR CAT on the PC. >> Radio ip address:4992 or radiohostname:4992 does work. >> AL, K0VM >> >> >> On 7/1/2024 4:40 PM, Black Michael via wsjt-devel wrote: >> >> >> > >> > >> > >> > It sounds like you have a value in the "Network Server" box which you >> should not need for the Slice rigs. >> > >> > >> > >> > >> > Mike W9MDB >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > On Monday, July 1, 2024 at 04:31:15 PM CDT, Bill Barrett via >> wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > Hello Al- >> > >> > >> > >> > I had the same error when selecting the Slice A option. >> > >> > Went back to Flex XXX >> > >> > >> > >> > >> > Hope this helps. >> > >> > >> > >> > >> > Bill W2PKY >> > >> > >> > >> > >> > >> > On Mon, Jul 1, 2024 at 5:20 PM k0vm via wsjt-devel < >> wsjt-devel@lists.sourceforge.net> wrote: >> > >> > >> >> >> >> ( wsjt-x-rc5/Hamlib 2024-06-30-T21:25Z, Flex 6600, SSDR 3.7.4) >> >> >> >> 1) When upgrading from RC4 ( which was running Flex 6xxx hamlib), rig >> selection was changed from Flex 6600 to ADT-200A. >> >> >> >> 2) Selecting SmartSDR slice A for rig results in Hamlib error.. >> >> >> >> >> >> Setting network ser5ver to 192.168.7.166:4992 does work... >> >> >> >> 3) selecting rig flex 6xxx does work with original server ip/port >> >> >> >> AL, K0VM >> >> _______________________________________________ >> >> wsjt-devel mailing list >> >> wsjt-devel@lists.sourceforge.net >> >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> >> > >> > >> > >> > >> > >> > _______________________________________________ >> > wsjt-devel mailing list >> > wsjt-devel@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > _______________________________________________ >> > wsjt-devel mailing list >> > wsjt-devel@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > >> >> >> >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
