Hello Mike- Instead of Network Server, how about Radio IP? Thanks; Bill W2PKY
On Tue, Jul 2, 2024 at 11:47 AM Black Michael via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Maybe I can make the error message a bit better -- yes -- you do need the > radio's IP address.... > > Do you mean it doesn't work if you append the port 4992 too? > > Mike W9MDB > > > > > On Tuesday, July 2, 2024 at 10:35:52 AM CDT, Michael Morgan via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > > When I installed the new rc5 software last night I tried the 6000 Slice > A. Based on the message i received I entered just the IP address of my > radio no port (looks like it was appending port 4992) and it seemed to work > from there. > > Michael, AA5SH > > On Tue, Jul 2, 2024 at 10:07 AM Bill Barrett via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > > Hello Mike- > > Good to know there are settings for SSDR, is there a tutorial on how to > use these new settings. > Could not find anything in the Ver 2.7 User Guide. > > Thanks; > Bill W2PKY > > On Tue, Jul 2, 2024 at 10:15 AM Black Michael via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > > What software are you using for the Flex? > > This was made for the current version of SmartSDR. > > Mike W9MDB > > > > > > > > > On Tuesday, July 2, 2024 at 09:08:44 AM CDT, k0vm via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > > > > > > > > > Mike, > It fails with the same error message if "Network Server" is blank. > Localhost (127.0.0.1) is not a valid ip address for a radio and port 4992 > is not serviced by either SSDR or SSDR CAT on the PC. > Radio ip address:4992 or radiohostname:4992 does work. > AL, K0VM > > > On 7/1/2024 4:40 PM, Black Michael via wsjt-devel wrote: > > > > > > > > > > It sounds like you have a value in the "Network Server" box which you > should not need for the Slice rigs. > > > > > > > > > > Mike W9MDB > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Monday, July 1, 2024 at 04:31:15 PM CDT, Bill Barrett via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > > > > > > > > > > > > > > > > > > > > > Hello Al- > > > > > > > > I had the same error when selecting the Slice A option. > > > > Went back to Flex XXX > > > > > > > > > > Hope this helps. > > > > > > > > > > Bill W2PKY > > > > > > > > > > > > On Mon, Jul 1, 2024 at 5:20 PM k0vm via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > > > > > >> > >> ( wsjt-x-rc5/Hamlib 2024-06-30-T21:25Z, Flex 6600, SSDR 3.7.4) > >> > >> 1) When upgrading from RC4 ( which was running Flex 6xxx hamlib), rig > selection was changed from Flex 6600 to ADT-200A. > >> > >> 2) Selecting SmartSDR slice A for rig results in Hamlib error.. > >> > >> > >> Setting network ser5ver to 192.168.7.166:4992 does work... > >> > >> 3) selecting rig flex 6xxx does work with original server ip/port > >> > >> AL, K0VM > >> _______________________________________________ > >> wsjt-devel mailing list > >> wsjt-devel@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > >> > > > > > > > > > > > > _______________________________________________ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
