Hint to Flex users...
To make life easier in the future.. Set a DHCP ip address
reservation for your radio in your LAN router.
Otherwise, the next time you boot up the radio, the DHCP may assign
a different ip address and you'll forever be updating the address in WSJT..
AL, K0VM
On 7/2/2024 10:39 AM, Black Michael via wsjt-devel wrote:
Maybe I can make the error message a bit better -- yes -- you do need
the radio's IP address....
Do you mean it doesn't work if you append the port 4992 too?
Mike W9MDB
On Tuesday, July 2, 2024 at 10:35:52 AM CDT, Michael Morgan via
wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
When I installed the new rc5 software last night I tried the 6000
Slice A. Based on the message i received I entered just the IP
address of my radio no port (looks like it was appending port 4992)
and it seemed to work from there.
Michael, AA5SH
On Tue, Jul 2, 2024 at 10:07 AM Bill Barrett via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
Hello Mike-
Good to know there are settings for SSDR, is there a tutorial on
how to use these new settings.
Could not find anything in the Ver 2.7 User Guide.
Thanks;
Bill W2PKY
On Tue, Jul 2, 2024 at 10:15 AM Black Michael via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
What software are you using for the Flex?
This was made for the current version of SmartSDR.
Mike W9MDB
On Tuesday, July 2, 2024 at 09:08:44 AM CDT, k0vm via
wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
Mike,
It fails with the same error message if "Network Server" is
blank.
Localhost (127.0.0.1) is not a valid ip address for a radio
and port 4992 is not serviced by either SSDR or SSDR CAT on
the PC.
Radio ip address:4992 or radiohostname:4992 does work.
AL, K0VM
On 7/1/2024 4:40 PM, Black Michael via wsjt-devel wrote:
>
>
>
> It sounds like you have a value in the "Network Server" box
which you should not need for the Slice rigs.
>
>
>
>
> Mike W9MDB
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> On Monday, July 1, 2024 at 04:31:15 PM CDT, Bill Barrett
via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote:
>
>
>
>
>
>
>
>
>
>
> Hello Al-
>
>
>
> I had the same error when selecting the Slice A option.
>
> Went back to Flex XXX
>
>
>
>
> Hope this helps.
>
>
>
>
> Bill W2PKY
>
>
>
>
>
> On Mon, Jul 1, 2024 at 5:20 PM k0vm via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
>
>
>>
>> ( wsjt-x-rc5/Hamlib 2024-06-30-T21:25Z, Flex 6600, SSDR 3.7.4)
>>
>> 1) When upgrading from RC4 ( which was running Flex 6xxx
hamlib), rig selection was changed from Flex 6600 to ADT-200A.
>>
>> 2) Selecting SmartSDR slice A for rig results in Hamlib error..
>>
>>
>> Setting network ser5ver to 192.168.7.166:4992
<http://192.168.7.166:4992> does work...
>>
>> 3) selecting rig flex 6xxx does work with original server
ip/port
>>
>> AL, K0VM
>> _______________________________________________
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
>
>
>
>
>
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
