Giuseppe, Open Xastir
Click on "File" Click on "Configure" Click on "Timing" Set "Posit TX Interval (min)" SLIDER to your desired beaconing rate. I have mine set to 60.0 which is the max for that slider and the best for a fixed station. Then click on the "OK" button at the bottom of the Timing window to save the settings. 73 Dave KB3EFS On 06/26/2017 11:24 AM, Menga wrote: > In a fixed station the coordinates given in the configuration can be > used to send its position and tell the others that the station is alive. > I noted that if a GPS is not connected to the program, when starting > Xastir a first packet with these coordinates is sent out on the air, > but no more. > A way exists to tell the system to continue to resent the packet with > the station position (eventually with a lower rate), even if a GPS is > not connected? > Giuseppe > IZ1GCL > > > _______________________________________________ > Xastir mailing list > [email protected] > http://xastir.org/mailman/listinfo/xastir > _______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir
