My first suggestion would be to make sure you are plugged into the PC/Comm jack. It sounds like you've pluged into the Data jack instead and are triggering the PTT line on that jack.
>From looking at the online manual (and that's all I can afford right now) both >jacks have the same number of outside pins so it would be easy to plug the >same plug into both. The PC/Comm jack adds a center pin for ground that isn't >there on the Data jack. Dave KD7MYC -----Original Message----- >From: Russell Handorf <[EMAIL PROTECTED]> >Sent: Dec 12, 2007 9:04 AM >To: [email protected] >Subject: [Xastir] Xastir and TM-D710A > >Greetings all, > >I'm trying to get my Kenwood TM-D710A and Xastir to work together. I >followed the instructions for just a serial connection only (/dev/ttyS0) >and start the port. My radio immediately begins to transmit *dead air* >and doesnt stop until I remove the serial cable. _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
