Heince,
Here's whats happening in my environment (after i copied the dracut
directory and pkglists from rh!).
When i try to genimage the compute profile:
packimage -o centos5.2 -p compute -a x86_64
[root@xcat centos]# ./genimage -i eth0 -n e1000,bnx2 -o centos6 -p compute
yum -y -c /tmp/genimage.10038.yum.conf
--installroot=/install/netboot/centos6/x86_64/compute/rootimg/
--disablerepo=* --enablerepo=centos6-x86_64-0 install bash
dracut-network nfs-utils openssl dhclient kernel openssh-server
openssh-clients wget vim-minimal ntp rpm rsync rsyslog
centos6-x86_64-0
| 3.7 kB 00:00 ...
Setting up Install Process
Package bash-4.1.2-3.el6.x86_64 already installed and latest version
Package 1:nfs-utils-1.2.2-7.el6.x86_64 already installed and latest version
Package openssl-1.0.0-4.el6.x86_64 already installed and latest version
Package 12:dhclient-4.1.1-12.P1.el6.x86_64 already installed and latest version
Package kernel-2.6.32-71.el6.x86_64 already installed and latest version
Package openssh-server-5.3p1-20.el6.x86_64 already installed and latest version
Package openssh-clients-5.3p1-20.el6.x86_64 already installed and latest version
Package wget-1.12-1.4.el6.x86_64 already installed and latest version
Package rsync-3.0.6-5.el6.x86_64 already installed and latest version
Resolving Dependencies
--> Running transaction check
---> Package dracut-network.noarch 0:004-32.el6 set to be updated
--> Processing Dependency: bridge-utils for package:
dracut-network-004-32.el6.noarch
--> Processing Dependency: vconfig for package: dracut-network-004-32.el6.noarch
--> Processing Dependency: iscsi-initiator-utils for package:
dracut-network-004-32.el6.noarch
---> Package ntp.x86_64 0:4.2.4p8-2.el6 set to be updated
--> Processing Dependency: ntpdate = 4.2.4p8-2.el6 for package:
ntp-4.2.4p8-2.el6.x86_64
---> Package rpm.x86_64 0:4.8.0-12.el6 set to be updated
--> Processing Dependency: curl for package: rpm-4.8.0-12.el6.x86_64
--> Processing Dependency: db4-utils for package: rpm-4.8.0-12.el6.x86_64
--> Processing Dependency: liblua-5.1.so()(64bit) for package:
rpm-4.8.0-12.el6.x86_64
--> Processing Dependency: libelf.so.1()(64bit) for package:
rpm-4.8.0-12.el6.x86_64
--> Processing Dependency: librpmbuild.so.1()(64bit) for package:
rpm-4.8.0-12.el6.x86_64
--> Processing Dependency: librpmio.so.1()(64bit) for package:
rpm-4.8.0-12.el6.x86_64
--> Processing Dependency: liblzma.so.0()(64bit) for package:
rpm-4.8.0-12.el6.x86_64
--> Processing Dependency: libmagic.so.1()(64bit) for package:
rpm-4.8.0-12.el6.x86_64
--> Processing Dependency: librpm.so.1()(64bit) for package:
rpm-4.8.0-12.el6.x86_64
---> Package rsyslog.x86_64 0:4.6.2-2.el6 set to be updated
--> Processing Dependency: logrotate >= 3.5.2 for package:
rsyslog-4.6.2-2.el6.x86_64
---> Package vim-minimal.x86_64 2:7.2.411-1.4.el6 set to be updated
--> Running transaction check
---> Package bridge-utils.x86_64 0:1.2-9.el6 set to be updated
---> Package curl.x86_64 0:7.19.7-16.el6 set to be updated
--> Processing Dependency: libcurl = 7.19.7-16.el6 for package:
curl-7.19.7-16.el6.x86_64
--> Processing Dependency: libcurl.so.4()(64bit) for package:
curl-7.19.7-16.el6.x86_64
--> Processing Dependency: libssh2.so.1()(64bit) for package:
curl-7.19.7-16.el6.x86_64
---> Package db4-utils.x86_64 0:4.7.25-16.el6 set to be updated
---> Package elfutils-libelf.x86_64 0:0.148-1.el6 set to be updated
---> Package file-libs.x86_64 0:5.04-5.el6 set to be updated
---> Package iscsi-initiator-utils.x86_64 0:6.2.0.872-10.el6 set to be updated
---> Package logrotate.x86_64 0:3.7.8-12.el6 set to be updated
---> Package lua.x86_64 0:5.1.4-4.1.el6 set to be updated
---> Package ntpdate.x86_64 0:4.2.4p8-2.el6 set to be updated
---> Package rpm-libs.x86_64 0:4.8.0-12.el6 set to be updated
---> Package vconfig.x86_64 0:1.9-8.1.el6 set to be updated
---> Package xz-libs.x86_64 0:4.999.9-0.3.beta.20091007git.el6 set to be updated
--> Running transaction check
---> Package libcurl.x86_64 0:7.19.7-16.el6 set to be updated
---> Package libssh2.x86_64 0:1.2.2-7.el6 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================================================================================================================
Package Arch
Version Repository
Size
=============================================================================================================================================================================
Installing:
dracut-network noarch
004-32.el6
centos6-x86_64-0 48 k
ntp x86_64
4.2.4p8-2.el6
centos6-x86_64-0 445 k
rpm x86_64
4.8.0-12.el6
centos6-x86_64-0 897 k
rsyslog x86_64
4.6.2-2.el6
centos6-x86_64-0 401 k
vim-minimal x86_64
2:7.2.411-1.4.el6
centos6-x86_64-0 365 k
Installing for dependencies:
bridge-utils x86_64
1.2-9.el6
centos6-x86_64-0 30 k
curl x86_64
7.19.7-16.el6
centos6-x86_64-0 190 k
db4-utils x86_64
4.7.25-16.el6
centos6-x86_64-0 130 k
elfutils-libelf x86_64
0.148-1.el6
centos6-x86_64-0 162 k
file-libs x86_64
5.04-5.el6
centos6-x86_64-0 308 k
iscsi-initiator-utils x86_64
6.2.0.872-10.el6
centos6-x86_64-0 560 k
libcurl x86_64
7.19.7-16.el6
centos6-x86_64-0 161 k
libssh2 x86_64
1.2.2-7.el6
centos6-x86_64-0 75 k
logrotate x86_64
3.7.8-12.el6
centos6-x86_64-0 53 k
lua x86_64
5.1.4-4.1.el6
centos6-x86_64-0 184 k
ntpdate x86_64
4.2.4p8-2.el6
centos6-x86_64-0 58 k
rpm-libs x86_64
4.8.0-12.el6
centos6-x86_64-0 307 k
vconfig x86_64
1.9-8.1.el6
centos6-x86_64-0 50 k
xz-libs x86_64
4.999.9-0.3.beta.20091007git.el6
centos6-x86_64-0 89 k
Transaction Summary
=============================================================================================================================================================================
Install 19 Package(s)
Upgrade 0 Package(s)
Total download size: 4.4 M
Installed size: 13 M
Downloading Packages:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Total
60 MB/s | 4.4 MB 00:00
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : file-libs-5.04-5.el6.x86_64
1/19
Installing : libssh2-1.2.2-7.el6.x86_64
2/19
Installing : elfutils-libelf-0.148-1.el6.x86_64
3/19
Installing : xz-libs-4.999.9-0.3.beta.20091007git.el6.x86_64
4/19
Installing : lua-5.1.4-4.1.el6.x86_64
5/19
Installing : libcurl-7.19.7-16.el6.x86_64
6/19
Installing : curl-7.19.7-16.el6.x86_64
7/19
Installing : iscsi-initiator-utils-6.2.0.872-10.el6.x86_64
8/19
Installing : vconfig-1.9-8.1.el6.x86_64
9/19
Installing : bridge-utils-1.2-9.el6.x86_64
10/19
Installing : logrotate-3.7.8-12.el6.x86_64
11/19
Installing : ntpdate-4.2.4p8-2.el6.x86_64
12/19
Installing : db4-utils-4.7.25-16.el6.x86_64
13/19
Installing : rpm-libs-4.8.0-12.el6.x86_64
14/19
Installing : rpm-4.8.0-12.el6.x86_64
15/19
Installing : ntp-4.2.4p8-2.el6.x86_64
16/19
Installing : rsyslog-4.6.2-2.el6.x86_64
17/19
Installing : 2:vim-minimal-7.2.411-1.4.el6.x86_64
18/19
Installing : dracut-network-004-32.el6.noarch
19/19
Installed:
dracut-network.noarch 0:004-32.el6 ntp.x86_64 0:4.2.4p8-2.el6
rpm.x86_64 0:4.8.0-12.el6 rsyslog.x86_64 0:4.6.2-2.el6
vim-minimal.x86_64 2:7.2.411-1.4.el6
Dependency Installed:
bridge-utils.x86_64 0:1.2-9.el6 curl.x86_64 0:7.19.7-16.el6
db4-utils.x86_64 0:4.7.25-16.el6
elfutils-libelf.x86_64 0:0.148-1.el6
file-libs.x86_64 0:5.04-5.el6 iscsi-initiator-utils.x86_64
0:6.2.0.872-10.el6 libcurl.x86_64 0:7.19.7-16.el6
libssh2.x86_64 0:1.2.2-7.el6
logrotate.x86_64 0:3.7.8-12.el6 lua.x86_64 0:5.1.4-4.1.el6
ntpdate.x86_64 0:4.2.4p8-2.el6
rpm-libs.x86_64 0:4.8.0-12.el6
vconfig.x86_64 0:1.9-8.1.el6 xz-libs.x86_64
0:4.999.9-0.3.beta.20091007git.el6
Complete!
cat: write error: Broken pipe
cat: write error: Broken pipe
cat: write error: Broken pipe
the initial ramdisk for statelite is generated successfully.
cat: write error: Broken pipe
cat: write error: Broken pipe
cat: write error: Broken pipe
And when i run genimage on the "kvm" profile:
"couldn't find the kernel file matched 2.6.32-71.29.1.el6.x86_64 in
/install/netboot/centos6/x86_64/kvm/rootimg/boot at ./genimage line
62."
FYI, this is what i did:
- copied dracut from "rh" to "centos"
- created some symlinks on centos/:
lrwxrwxrwx 1 root root 27 Jul 28 13:36 compute.pkglist ->
../rh/compute.rhel6.pkglist
lrwxrwxrwx 1 root root 24 Jul 28 13:35 kvm.pkglist ->
../rh/kvm.rhels6.pkglist
Any thoughts?
Thanks,
Luis
On Thu, Jul 28, 2011 at 12:12 PM, Luis Miguel Silva
<[email protected]> wrote:
> Hmm, interesting!
> Thanks for the tip! ;o))
>
> Luis Miguel Silva
> On Jul 28, 2011, at 12:01 PM, "heince.nvg" <[email protected]> wrote:
>
> haha strange, i didn't have that warnings.
>
> - i have no problem installing centos6 kvm because my server support it,
> bridging also no issue
> - centos6 netboot, this is what i do to make it work:
> * copy rhel6 pkglist to centos
> * copy dracut folder on rh folder to centos folder
> * i think the problem because rh6 didn't use busybox-anaconda anymore, so
> you have to feed it using dracut
> * genimage ...
> * packimage ...
> * nodeset [node] netboot
> * boot it
>
> - i haven't tried netboot centos 6 kvm
>
> Regards,
> Heince
>
> On Thu, 2011-07-28 at 11:54 -0600, Luis Miguel Silva wrote:
>
> I have no problem with the warnings! :o)
> Just wanted to report what is happening to check if it is normal or not! ;o)
>
> I now understand it is not critical!
>
> Thanks,
> Luis
>
> On Thu, Jul 28, 2011 at 11:41 AM, Lissa Valletta <[email protected]> wrote:
>> If you want to stop the warning, take each one and for example:
>> mv /opt/xcat/lib/perl/xCAT_plugin/fsp.pm
>> /opt/xcat/lib/perl/xCAT_plugin/fsp.pm.save
>>
>> You don't need them for x-series.
>>
>> Lissa K. Valletta
>> 2-3/T12
>> Poughkeepsie, NY 12601
>> (tie 293) 433-3102
>>
>>
>>
>>
>>
>> From: Luis Miguel Silva <[email protected]>
>> To: xCAT Users Mailing list <[email protected]>
>> Date: 07/28/2011 11:46 AM
>> Subject: Re: [xcat-user] xCAT complains about certain modules
>> (fsp.pm,
>> hmc.pm and ivm.pm) on restart
>>
>>
>>
>> By the way, regarding the modules, i have them too!
>> (and i'm using the same snapshot you are :o)).
>>
>> The problem is that xCAT complains about them at start up ;o).
>> (service xcatd restart)
>>
>> Thanks!
>> Luis
>>
>> On Thu, Jul 28, 2011 at 9:42 AM, Luis Miguel Silva
>> <[email protected]> wrote:
>>> Heince,
>>>
>>> Thanks!
>>>
>>> On an unrelated topic...how well is it working for you? (CentOS 6 + xCAT
>> 2.6)?
>>>
>>> According to my tests, i'm having trouble running:
>>> - installing centos6 kvm -> did not have kvm support! :o( [the kvm
>>> modules were there but were not loaded and it didnt set up a bridge
>>> interface for me)
>>> - netbooting centos6 compute -> failed (genimage for this profile
>>> failed so i could not pack the image)
>>> - netbooting centos6 kvm -> failed (genimage threw some errors but
>>> seemed to complete so i ran "packimage". But now when itry to net boot
>>> from it it complains asking if i ran genimage before running
>>> packimage)...
>>>
>>> Are you, by any chance, provisioning these images in your system? :o)
>>>
>>> Thanks,
>>> Luis
>>>
>>> On Thu, Jul 28, 2011 at 9:32 AM, heince.nvg <[email protected]> wrote:
>>>> Hi Luis :o)
>>>>
>>>> i'm also using CentOS 6,
>>>> i have those modules using xCAT-server-2.6.2-snap201107192304
>>>>
>>>> Regards,
>>>> Heince
>>>>
>>>> On Thu, 2011-07-28 at 08:39 -0600, Luis Miguel Silva wrote:
>>>>> Thank you!
>>>>>
>>>>> Luis Miguel Silva
>>>>>
>>>>> On Jul 28, 2011, at 2:02 AM, Xiao Peng Wang <[email protected]> wrote:
>>>>>
>>>>>
>>>>>
>>>>> > It's a problem for Centos6 and rh6. But these perl modules are not
>>>>> > needed for x86/x86_64 system. You can ignore it as a message error.
>>>>> >
>>>>> > Thanks
>>>>> > Best Regards
>>>>> >
>> ----------------------------------------------------------------------
>>>>> > Wang Xiaopeng (王晓朋)
>>>>> > IBM China System Technology Laboratory
>>>>> > Tel: 86-10-82453455
>>>>> > Email: [email protected]
>>>>> > Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road,
>>>>> > Haidian District Beijing P.R.China 100193
>>>>> >
>>>>> > <graycol.gif>Luis Miguel Silva ---2011-07-28 03:34:59---Lisa, This
>>>>> > is what i have:
>>>>> >
>>>>> > From: Luis Miguel Silva <[email protected]>
>>>>> > To: xCAT Users Mailing list <[email protected]>
>>>>> > Date: 2011-07-28 03:34
>>>>> > Subject: Re: [xcat-user] xCAT complains about certain modules
>>>>> > (fsp.pm, hmc.pm and ivm.pm) on restart
>>>>> >
>>>>> >
>>>>> >
>>>>> > ____________________________________________________________________
>>>>> >
>>>>> >
>>>>> >
>>>>> > Lisa,
>>>>> >
>>>>> > This is what i have:
>>>>> > [root@xcat ~]# nodels -v
>>>>> > Version 2.6.2 (svn r10120, built Tue Jul 19 23:03:39 EDT 2011)
>>>>> > [root@xcat ~]#
>>>>> >
>>>>> > [root@xcat ~]# cat /etc/yum.repos.d/xCAT-*
>>>>> > [xcat-2-core]
>>>>> > name=xCAT 2 Core packages
>>>>> > baseurl=http://xcat.sourceforge.net/yum/2.6/xcat-core
>>>>> > enabled=1
>>>>> > gpgcheck=1
>>>>> >
>>
>> gpgkey=http://xcat.sourceforge.net/yum/2.6/xcat-core/repodata/repomd.xml.key
>>
>>>>> > [xcat-dep]
>>>>> > name=xCAT 2 depedencies
>>>>> > baseurl=http://xcat.sourceforge.net/yum/xcat-dep/rh5/x86_64
>>>>> > enabled=1
>>>>> > gpgcheck=1
>>>>> >
>>
>> gpgkey=http://xcat.sourceforge.net/yum/xcat-dep/rh5/x86_64/repodata/repomd.xml.key
>>
>>>>> > [root@xcat ~]#
>>>>> >
>>>>> >
>>>>> > Thanks,
>>>>> > Luis
>>>>> >
>>>>> > On Wed, Jul 27, 2011 at 1:23 PM, Lissa Valletta <[email protected]>
>>>>> > wrote:
>>>>> > > Could you run nodels -v? Also did you put on the lastest deps
>>>>> > package?
>>>>> > > But also we have not tested anything on Centos 6. Check our home
>>>>> > page.
>>>>> > > Centos 5 is the last supported level.
>>>>> > >
>>>>> > >
>>>>> > > Lissa K. Valletta
>>>>> > > 2-3/T12
>>>>> > > Poughkeepsie, NY 12601
>>>>> > > (tie 293) 433-3102
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > > From: Luis Miguel Silva <[email protected]>
>>>>> > > To: xCAT Users Mailing list <[email protected]>
>>>>> > > Date: 07/27/2011 12:24 PM
>>>>> > > Subject: [xcat-user] xCAT complains about certain modules
>>>>> > (fsp.pm,
>>>>> > > hmc.pm and ivm.pm) on restart
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > > Dear all,
>>>>> > >
>>>>> > > I just reinstalled one of my xCAT systems with CentOS 6 and xCAT
>>>>> > 2.6.x
>>>>> > > (from the daily snapshots repo) and i'm getting this error:
>>>>> > > [root@l01 backups]# /etc/init.d/xcatd restart
>>>>> > > Restarting xCATd Error loading module
>>>>> > > /opt/xcat/lib/perl/xCAT_plugin/bpa.pm ...skipping
>>>>> > > Error loading module /opt/xcat/lib/perl/xCAT_plugin/fsp.pm
>>>>> > ...skipping
>>>>> > > Error loading module /opt/xcat/lib/perl/xCAT_plugin/hmc.pm
>>>>> > ...skipping
>>>>> > > Error loading module /opt/xcat/lib/perl/xCAT_plugin/ivm.pm
>>>>> > ...skipping
>>>>> > >
>>>>> > > Shutting down vsftpd: [ OK
>>>>> > ]
>>>>> > > Starting vsftpd for vsftpd: [ OK
>>>>> > ]
>>>>> > > [ OK ]
>>>>> > > [root@l01 backups]#
>>>>> > >
>>>>> > > Any thoughts?
>>>>> > >
>>>>> > > Thanks,
>>>>> > > Luis
>>>>> > >
>>>>> > >
>>>>> >
>>
>> ------------------------------------------------------------------------------
>>
>>>>> > >
>>>>> > > Got Input? Slashdot Needs You.
>>>>> > > Take our quick survey online. Come on, we don't ask for help
>>>>> > often.
>>>>> > > Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>> > > http://p.sf.net/sfu/slashdot-survey
>>>>> > > _______________________________________________
>>>>> > > xCAT-user mailing list
>>>>> > > [email protected]
>>>>> > > https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> >
>>
>> ------------------------------------------------------------------------------
>>
>>>>> > > Got Input? Slashdot Needs You.
>>>>> > > Take our quick survey online. Come on, we don't ask for help
>>>>> > often.
>>>>> > > Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>> > > http://p.sf.net/sfu/slashdot-survey
>>>>> > > _______________________________________________
>>>>> > > xCAT-user mailing list
>>>>> > > [email protected]
>>>>> > > https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>> > >
>>>>> >
>>>>> >
>>
>> ------------------------------------------------------------------------------
>>
>>>>> > Got Input? Slashdot Needs You.
>>>>> > Take our quick survey online. Come on, we don't ask for help often.
>>>>> > Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>> > http://p.sf.net/sfu/slashdot-survey
>>>>> > _______________________________________________
>>>>> > xCAT-user mailing list
>>>>> > [email protected]
>>>>> > https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>> >
>>>>> >
>>>>> >
>>
>> ------------------------------------------------------------------------------
>>
>>>>> > Got Input? Slashdot Needs You.
>>>>> > Take our quick survey online. Come on, we don't ask for help often.
>>>>> > Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>> > http://p.sf.net/sfu/slashdot-survey
>>>>> > _______________________________________________
>>>>> > xCAT-user mailing list
>>>>> > [email protected]
>>>>> > https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>> >
>>>>>
>>
>> ------------------------------------------------------------------------------
>>
>>>>> Got Input? Slashdot Needs You.
>>>>> Take our quick survey online. Come on, we don't ask for help often.
>>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>> http://p.sf.net/sfu/slashdot-survey
>>>>> _______________________________________________ xCAT-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>
>>>>
>>>>
>>>>
>>
>> ------------------------------------------------------------------------------
>>
>>>> Got Input? Slashdot Needs You.
>>>> Take our quick survey online. Come on, we don't ask for help often.
>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>> http://p.sf.net/sfu/slashdot-survey
>>>> _______________________________________________
>>>> xCAT-user mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>
>>>
>>
>>
>> ------------------------------------------------------------------------------
>>
>> Got Input? Slashdot Needs You.
>> Take our quick survey online. Come on, we don't ask for help often.
>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>> http://p.sf.net/sfu/slashdot-survey
>> _______________________________________________
>> xCAT-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>
>> ------------------------------------------------------------------------------
>> Got Input? Slashdot Needs You.
>> Take our quick survey online. Come on, we don't ask for help often.
>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>> http://p.sf.net/sfu/slashdot-survey
>> _______________________________________________
>> xCAT-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>
>
> ------------------------------------------------------------------------------
> Got Input? Slashdot Needs You.
> Take our quick survey online. Come on, we don't ask for help often.
> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
> http://p.sf.net/sfu/slashdot-survey
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
> ------------------------------------------------------------------------------
> Got Input? Slashdot Needs You.
> Take our quick survey online. Come on, we don't ask for help often.
> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
> http://p.sf.net/sfu/slashdot-survey
>
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
------------------------------------------------------------------------------
Got Input? Slashdot Needs You.
Take our quick survey online. Come on, we don't ask for help often.
Plus, you'll get a chance to win $100 to spend on ThinkGeek.
http://p.sf.net/sfu/slashdot-survey
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
