sorry for my poor english :p i used kvmtest instead of kvm as my profile name and its working.
Regards, Heince On Thu, 2011-07-28 at 20:09 -0600, Luis Miguel Silva wrote: > I'm sorry, i didnt catch that :o). > > What do you mean by "it's fail but using different profile name > (kvmtest) is working"?? > > Thanks! > Luis > > On Thu, Jul 28, 2011 at 8:02 PM, heince.nvg <[email protected]> wrote: > > I also got 'cat: write error: Broken pipe' , but it's working. > > > > for netbooting kvm, i just tested using kvm profile name, it's fail but > > using different profile name (kvmtest) is working. > > > > Regards, > > Heince > > > > On Thu, 2011-07-28 at 13:38 -0600, Luis Miguel Silva wrote: > >> Heince, > >> > >> Here's whats happening in my environment (after i copied the dracut > >> directory and pkglists from rh!). > >> > >> When i try to genimage the compute profile: > >> packimage -o centos5.2 -p compute -a x86_64 > >> > >> > >> [root@xcat centos]# ./genimage -i eth0 -n e1000,bnx2 -o centos6 -p compute > >> yum -y -c /tmp/genimage.10038.yum.conf > >> --installroot=/install/netboot/centos6/x86_64/compute/rootimg/ > >> --disablerepo=* --enablerepo=centos6-x86_64-0 install bash > >> dracut-network nfs-utils openssl dhclient kernel openssh-server > >> openssh-clients wget vim-minimal ntp rpm rsync rsyslog > >> centos6-x86_64-0 > >> > >> | 3.7 kB 00:00 ... > >> Setting up Install Process > >> Package bash-4.1.2-3.el6.x86_64 already installed and latest version > >> Package 1:nfs-utils-1.2.2-7.el6.x86_64 already installed and latest version > >> Package openssl-1.0.0-4.el6.x86_64 already installed and latest version > >> Package 12:dhclient-4.1.1-12.P1.el6.x86_64 already installed and latest > >> version > >> Package kernel-2.6.32-71.el6.x86_64 already installed and latest version > >> Package openssh-server-5.3p1-20.el6.x86_64 already installed and latest > >> version > >> Package openssh-clients-5.3p1-20.el6.x86_64 already installed and latest > >> version > >> Package wget-1.12-1.4.el6.x86_64 already installed and latest version > >> Package rsync-3.0.6-5.el6.x86_64 already installed and latest version > >> Resolving Dependencies > >> --> Running transaction check > >> ---> Package dracut-network.noarch 0:004-32.el6 set to be updated > >> --> Processing Dependency: bridge-utils for package: > >> dracut-network-004-32.el6.noarch > >> --> Processing Dependency: vconfig for package: > >> dracut-network-004-32.el6.noarch > >> --> Processing Dependency: iscsi-initiator-utils for package: > >> dracut-network-004-32.el6.noarch > >> ---> Package ntp.x86_64 0:4.2.4p8-2.el6 set to be updated > >> --> Processing Dependency: ntpdate = 4.2.4p8-2.el6 for package: > >> ntp-4.2.4p8-2.el6.x86_64 > >> ---> Package rpm.x86_64 0:4.8.0-12.el6 set to be updated > >> --> Processing Dependency: curl for package: rpm-4.8.0-12.el6.x86_64 > >> --> Processing Dependency: db4-utils for package: rpm-4.8.0-12.el6.x86_64 > >> --> Processing Dependency: liblua-5.1.so()(64bit) for package: > >> rpm-4.8.0-12.el6.x86_64 > >> --> Processing Dependency: libelf.so.1()(64bit) for package: > >> rpm-4.8.0-12.el6.x86_64 > >> --> Processing Dependency: librpmbuild.so.1()(64bit) for package: > >> rpm-4.8.0-12.el6.x86_64 > >> --> Processing Dependency: librpmio.so.1()(64bit) for package: > >> rpm-4.8.0-12.el6.x86_64 > >> --> Processing Dependency: liblzma.so.0()(64bit) for package: > >> rpm-4.8.0-12.el6.x86_64 > >> --> Processing Dependency: libmagic.so.1()(64bit) for package: > >> rpm-4.8.0-12.el6.x86_64 > >> --> Processing Dependency: librpm.so.1()(64bit) for package: > >> rpm-4.8.0-12.el6.x86_64 > >> ---> Package rsyslog.x86_64 0:4.6.2-2.el6 set to be updated > >> --> Processing Dependency: logrotate >= 3.5.2 for package: > >> rsyslog-4.6.2-2.el6.x86_64 > >> ---> Package vim-minimal.x86_64 2:7.2.411-1.4.el6 set to be updated > >> --> Running transaction check > >> ---> Package bridge-utils.x86_64 0:1.2-9.el6 set to be updated > >> ---> Package curl.x86_64 0:7.19.7-16.el6 set to be updated > >> --> Processing Dependency: libcurl = 7.19.7-16.el6 for package: > >> curl-7.19.7-16.el6.x86_64 > >> --> Processing Dependency: libcurl.so.4()(64bit) for package: > >> curl-7.19.7-16.el6.x86_64 > >> --> Processing Dependency: libssh2.so.1()(64bit) for package: > >> curl-7.19.7-16.el6.x86_64 > >> ---> Package db4-utils.x86_64 0:4.7.25-16.el6 set to be updated > >> ---> Package elfutils-libelf.x86_64 0:0.148-1.el6 set to be updated > >> ---> Package file-libs.x86_64 0:5.04-5.el6 set to be updated > >> ---> Package iscsi-initiator-utils.x86_64 0:6.2.0.872-10.el6 set to be > >> updated > >> ---> Package logrotate.x86_64 0:3.7.8-12.el6 set to be updated > >> ---> Package lua.x86_64 0:5.1.4-4.1.el6 set to be updated > >> ---> Package ntpdate.x86_64 0:4.2.4p8-2.el6 set to be updated > >> ---> Package rpm-libs.x86_64 0:4.8.0-12.el6 set to be updated > >> ---> Package vconfig.x86_64 0:1.9-8.1.el6 set to be updated > >> ---> Package xz-libs.x86_64 0:4.999.9-0.3.beta.20091007git.el6 set to be > >> updated > >> --> Running transaction check > >> ---> Package libcurl.x86_64 0:7.19.7-16.el6 set to be updated > >> ---> Package libssh2.x86_64 0:1.2.2-7.el6 set to be updated > >> --> Finished Dependency Resolution > >> > >> Dependencies Resolved > >> > >> ============================================================================================================================================================================= > >> Package Arch > >> Version Repository > >> Size > >> ============================================================================================================================================================================= > >> Installing: > >> dracut-network noarch > >> 004-32.el6 > >> centos6-x86_64-0 48 k > >> ntp x86_64 > >> 4.2.4p8-2.el6 > >> centos6-x86_64-0 445 k > >> rpm x86_64 > >> 4.8.0-12.el6 > >> centos6-x86_64-0 897 k > >> rsyslog x86_64 > >> 4.6.2-2.el6 > >> centos6-x86_64-0 401 k > >> vim-minimal x86_64 > >> 2:7.2.411-1.4.el6 > >> centos6-x86_64-0 365 k > >> Installing for dependencies: > >> bridge-utils x86_64 > >> 1.2-9.el6 > >> centos6-x86_64-0 30 k > >> curl x86_64 > >> 7.19.7-16.el6 > >> centos6-x86_64-0 190 k > >> db4-utils x86_64 > >> 4.7.25-16.el6 > >> centos6-x86_64-0 130 k > >> elfutils-libelf x86_64 > >> 0.148-1.el6 > >> centos6-x86_64-0 162 k > >> file-libs x86_64 > >> 5.04-5.el6 > >> centos6-x86_64-0 308 k > >> iscsi-initiator-utils x86_64 > >> 6.2.0.872-10.el6 > >> centos6-x86_64-0 560 k > >> libcurl x86_64 > >> 7.19.7-16.el6 > >> centos6-x86_64-0 161 k > >> libssh2 x86_64 > >> 1.2.2-7.el6 > >> centos6-x86_64-0 75 k > >> logrotate x86_64 > >> 3.7.8-12.el6 > >> centos6-x86_64-0 53 k > >> lua x86_64 > >> 5.1.4-4.1.el6 > >> centos6-x86_64-0 184 k > >> ntpdate x86_64 > >> 4.2.4p8-2.el6 > >> centos6-x86_64-0 58 k > >> rpm-libs x86_64 > >> 4.8.0-12.el6 > >> centos6-x86_64-0 307 k > >> vconfig x86_64 > >> 1.9-8.1.el6 > >> centos6-x86_64-0 50 k > >> xz-libs x86_64 > >> 4.999.9-0.3.beta.20091007git.el6 > >> centos6-x86_64-0 89 k > >> > >> Transaction Summary > >> ============================================================================================================================================================================= > >> Install 19 Package(s) > >> Upgrade 0 Package(s) > >> > >> Total download size: 4.4 M > >> Installed size: 13 M > >> Downloading Packages: > >> ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > >> Total > >> > >> 60 MB/s | 4.4 MB 00:00 > >> Running rpm_check_debug > >> Running Transaction Test > >> Transaction Test Succeeded > >> Running Transaction > >> Installing : file-libs-5.04-5.el6.x86_64 > >> > >> 1/19 > >> Installing : libssh2-1.2.2-7.el6.x86_64 > >> > >> 2/19 > >> Installing : elfutils-libelf-0.148-1.el6.x86_64 > >> > >> 3/19 > >> Installing : xz-libs-4.999.9-0.3.beta.20091007git.el6.x86_64 > >> > >> 4/19 > >> Installing : lua-5.1.4-4.1.el6.x86_64 > >> > >> 5/19 > >> Installing : libcurl-7.19.7-16.el6.x86_64 > >> > >> 6/19 > >> Installing : curl-7.19.7-16.el6.x86_64 > >> > >> 7/19 > >> Installing : iscsi-initiator-utils-6.2.0.872-10.el6.x86_64 > >> > >> 8/19 > >> Installing : vconfig-1.9-8.1.el6.x86_64 > >> > >> 9/19 > >> Installing : bridge-utils-1.2-9.el6.x86_64 > >> > >> 10/19 > >> Installing : logrotate-3.7.8-12.el6.x86_64 > >> > >> 11/19 > >> Installing : ntpdate-4.2.4p8-2.el6.x86_64 > >> > >> 12/19 > >> Installing : db4-utils-4.7.25-16.el6.x86_64 > >> > >> 13/19 > >> Installing : rpm-libs-4.8.0-12.el6.x86_64 > >> > >> 14/19 > >> Installing : rpm-4.8.0-12.el6.x86_64 > >> > >> 15/19 > >> Installing : ntp-4.2.4p8-2.el6.x86_64 > >> > >> 16/19 > >> Installing : rsyslog-4.6.2-2.el6.x86_64 > >> > >> 17/19 > >> Installing : 2:vim-minimal-7.2.411-1.4.el6.x86_64 > >> > >> 18/19 > >> Installing : dracut-network-004-32.el6.noarch > >> > >> 19/19 > >> > >> Installed: > >> dracut-network.noarch 0:004-32.el6 ntp.x86_64 0:4.2.4p8-2.el6 > >> rpm.x86_64 0:4.8.0-12.el6 rsyslog.x86_64 0:4.6.2-2.el6 > >> vim-minimal.x86_64 2:7.2.411-1.4.el6 > >> > >> Dependency Installed: > >> bridge-utils.x86_64 0:1.2-9.el6 curl.x86_64 0:7.19.7-16.el6 > >> db4-utils.x86_64 0:4.7.25-16.el6 > >> elfutils-libelf.x86_64 0:0.148-1.el6 > >> file-libs.x86_64 0:5.04-5.el6 iscsi-initiator-utils.x86_64 > >> 0:6.2.0.872-10.el6 libcurl.x86_64 0:7.19.7-16.el6 > >> libssh2.x86_64 0:1.2.2-7.el6 > >> logrotate.x86_64 0:3.7.8-12.el6 lua.x86_64 0:5.1.4-4.1.el6 > >> ntpdate.x86_64 0:4.2.4p8-2.el6 > >> rpm-libs.x86_64 0:4.8.0-12.el6 > >> vconfig.x86_64 0:1.9-8.1.el6 xz-libs.x86_64 > >> 0:4.999.9-0.3.beta.20091007git.el6 > >> > >> Complete! > >> cat: write error: Broken pipe > >> cat: write error: Broken pipe > >> cat: write error: Broken pipe > >> > >> the initial ramdisk for statelite is generated successfully. > >> cat: write error: Broken pipe > >> cat: write error: Broken pipe > >> cat: write error: Broken pipe > >> > >> And when i run genimage on the "kvm" profile: > >> "couldn't find the kernel file matched 2.6.32-71.29.1.el6.x86_64 in > >> /install/netboot/centos6/x86_64/kvm/rootimg/boot at ./genimage line > >> 62." > >> > >> FYI, this is what i did: > >> - copied dracut from "rh" to "centos" > >> - created some symlinks on centos/: > >> lrwxrwxrwx 1 root root 27 Jul 28 13:36 compute.pkglist -> > >> ../rh/compute.rhel6.pkglist > >> lrwxrwxrwx 1 root root 24 Jul 28 13:35 kvm.pkglist -> > >> ../rh/kvm.rhels6.pkglist > >> > >> Any thoughts? > >> > >> Thanks, > >> Luis > >> > >> On Thu, Jul 28, 2011 at 12:12 PM, Luis Miguel Silva > >> <[email protected]> wrote: > >> > Hmm, interesting! > >> > Thanks for the tip! ;o)) > >> > > >> > Luis Miguel Silva > >> > On Jul 28, 2011, at 12:01 PM, "heince.nvg" <[email protected]> wrote: > >> > > >> > haha strange, i didn't have that warnings. > >> > > >> > - i have no problem installing centos6 kvm because my server support it, > >> > bridging also no issue > >> > - centos6 netboot, this is what i do to make it work: > >> > * copy rhel6 pkglist to centos > >> > * copy dracut folder on rh folder to centos folder > >> > * i think the problem because rh6 didn't use busybox-anaconda anymore, > >> > so > >> > you have to feed it using dracut > >> > * genimage ... > >> > * packimage ... > >> > * nodeset [node] netboot > >> > * boot it > >> > > >> > - i haven't tried netboot centos 6 kvm > >> > > >> > Regards, > >> > Heince > >> > > >> > On Thu, 2011-07-28 at 11:54 -0600, Luis Miguel Silva wrote: > >> > > >> > I have no problem with the warnings! :o) > >> > Just wanted to report what is happening to check if it is normal or not! > >> > ;o) > >> > > >> > I now understand it is not critical! > >> > > >> > Thanks, > >> > Luis > >> > > >> > On Thu, Jul 28, 2011 at 11:41 AM, Lissa Valletta <[email protected]> > >> > wrote: > >> >> If you want to stop the warning, take each one and for example: > >> >> mv /opt/xcat/lib/perl/xCAT_plugin/fsp.pm > >> >> /opt/xcat/lib/perl/xCAT_plugin/fsp.pm.save > >> >> > >> >> You don't need them for x-series. > >> >> > >> >> Lissa K. Valletta > >> >> 2-3/T12 > >> >> Poughkeepsie, NY 12601 > >> >> (tie 293) 433-3102 > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> From: Luis Miguel Silva <[email protected]> > >> >> To: xCAT Users Mailing list <[email protected]> > >> >> Date: 07/28/2011 11:46 AM > >> >> Subject: Re: [xcat-user] xCAT complains about certain modules > >> >> (fsp.pm, > >> >> hmc.pm and ivm.pm) on restart > >> >> > >> >> > >> >> > >> >> By the way, regarding the modules, i have them too! > >> >> (and i'm using the same snapshot you are :o)). > >> >> > >> >> The problem is that xCAT complains about them at start up ;o). > >> >> (service xcatd restart) > >> >> > >> >> Thanks! > >> >> Luis > >> >> > >> >> On Thu, Jul 28, 2011 at 9:42 AM, Luis Miguel Silva > >> >> <[email protected]> wrote: > >> >>> Heince, > >> >>> > >> >>> Thanks! > >> >>> > >> >>> On an unrelated topic...how well is it working for you? (CentOS 6 + > >> >>> xCAT > >> >> 2.6)? > >> >>> > >> >>> According to my tests, i'm having trouble running: > >> >>> - installing centos6 kvm -> did not have kvm support! :o( [the kvm > >> >>> modules were there but were not loaded and it didnt set up a bridge > >> >>> interface for me) > >> >>> - netbooting centos6 compute -> failed (genimage for this profile > >> >>> failed so i could not pack the image) > >> >>> - netbooting centos6 kvm -> failed (genimage threw some errors but > >> >>> seemed to complete so i ran "packimage". But now when itry to net boot > >> >>> from it it complains asking if i ran genimage before running > >> >>> packimage)... > >> >>> > >> >>> Are you, by any chance, provisioning these images in your system? :o) > >> >>> > >> >>> Thanks, > >> >>> Luis > >> >>> > >> >>> On Thu, Jul 28, 2011 at 9:32 AM, heince.nvg <[email protected]> > >> >>> wrote: > >> >>>> Hi Luis :o) > >> >>>> > >> >>>> i'm also using CentOS 6, > >> >>>> i have those modules using xCAT-server-2.6.2-snap201107192304 > >> >>>> > >> >>>> Regards, > >> >>>> Heince > >> >>>> > >> >>>> On Thu, 2011-07-28 at 08:39 -0600, Luis Miguel Silva wrote: > >> >>>>> Thank you! > >> >>>>> > >> >>>>> Luis Miguel Silva > >> >>>>> > >> >>>>> On Jul 28, 2011, at 2:02 AM, Xiao Peng Wang <[email protected]> wrote: > >> >>>>> > >> >>>>> > >> >>>>> > >> >>>>> > It's a problem for Centos6 and rh6. But these perl modules are not > >> >>>>> > needed for x86/x86_64 system. You can ignore it as a message error. > >> >>>>> > > >> >>>>> > Thanks > >> >>>>> > Best Regards > >> >>>>> > > >> >> ---------------------------------------------------------------------- > >> >>>>> > Wang Xiaopeng (王晓朋) > >> >>>>> > IBM China System Technology Laboratory > >> >>>>> > Tel: 86-10-82453455 > >> >>>>> > Email: [email protected] > >> >>>>> > Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West > >> >>>>> > Road, > >> >>>>> > Haidian District Beijing P.R.China 100193 > >> >>>>> > > >> >>>>> > <graycol.gif>Luis Miguel Silva ---2011-07-28 03:34:59---Lisa, This > >> >>>>> > is what i have: > >> >>>>> > > >> >>>>> > From: Luis Miguel Silva <[email protected]> > >> >>>>> > To: xCAT Users Mailing list <[email protected]> > >> >>>>> > Date: 2011-07-28 03:34 > >> >>>>> > Subject: Re: [xcat-user] xCAT complains about certain modules > >> >>>>> > (fsp.pm, hmc.pm and ivm.pm) on restart > >> >>>>> > > >> >>>>> > > >> >>>>> > > >> >>>>> > ____________________________________________________________________ > >> >>>>> > > >> >>>>> > > >> >>>>> > > >> >>>>> > Lisa, > >> >>>>> > > >> >>>>> > This is what i have: > >> >>>>> > [root@xcat ~]# nodels -v > >> >>>>> > Version 2.6.2 (svn r10120, built Tue Jul 19 23:03:39 EDT 2011) > >> >>>>> > [root@xcat ~]# > >> >>>>> > > >> >>>>> > [root@xcat ~]# cat /etc/yum.repos.d/xCAT-* > >> >>>>> > [xcat-2-core] > >> >>>>> > name=xCAT 2 Core packages > >> >>>>> > baseurl=http://xcat.sourceforge.net/yum/2.6/xcat-core > >> >>>>> > enabled=1 > >> >>>>> > gpgcheck=1 > >> >>>>> > > >> >> > >> >> gpgkey=http://xcat.sourceforge.net/yum/2.6/xcat-core/repodata/repomd.xml.key > >> >> > >> >>>>> > [xcat-dep] > >> >>>>> > name=xCAT 2 depedencies > >> >>>>> > baseurl=http://xcat.sourceforge.net/yum/xcat-dep/rh5/x86_64 > >> >>>>> > enabled=1 > >> >>>>> > gpgcheck=1 > >> >>>>> > > >> >> > >> >> gpgkey=http://xcat.sourceforge.net/yum/xcat-dep/rh5/x86_64/repodata/repomd.xml.key > >> >> > >> >>>>> > [root@xcat ~]# > >> >>>>> > > >> >>>>> > > >> >>>>> > Thanks, > >> >>>>> > Luis > >> >>>>> > > >> >>>>> > On Wed, Jul 27, 2011 at 1:23 PM, Lissa Valletta <[email protected]> > >> >>>>> > wrote: > >> >>>>> > > Could you run nodels -v? Also did you put on the lastest deps > >> >>>>> > package? > >> >>>>> > > But also we have not tested anything on Centos 6. Check our > >> >>>>> > > home > >> >>>>> > page. > >> >>>>> > > Centos 5 is the last supported level. > >> >>>>> > > > >> >>>>> > > > >> >>>>> > > Lissa K. Valletta > >> >>>>> > > 2-3/T12 > >> >>>>> > > Poughkeepsie, NY 12601 > >> >>>>> > > (tie 293) 433-3102 > >> >>>>> > > > >> >>>>> > > > >> >>>>> > > > >> >>>>> > > > >> >>>>> > > > >> >>>>> > > From: Luis Miguel Silva <[email protected]> > >> >>>>> > > To: xCAT Users Mailing list <[email protected]> > >> >>>>> > > Date: 07/27/2011 12:24 PM > >> >>>>> > > Subject: [xcat-user] xCAT complains about certain modules > >> >>>>> > (fsp.pm, > >> >>>>> > > hmc.pm and ivm.pm) on restart > >> >>>>> > > > >> >>>>> > > > >> >>>>> > > > >> >>>>> > > Dear all, > >> >>>>> > > > >> >>>>> > > I just reinstalled one of my xCAT systems with CentOS 6 and xCAT > >> >>>>> > 2.6.x > >> >>>>> > > (from the daily snapshots repo) and i'm getting this error: > >> >>>>> > > [root@l01 backups]# /etc/init.d/xcatd restart > >> >>>>> > > Restarting xCATd Error loading module > >> >>>>> > > /opt/xcat/lib/perl/xCAT_plugin/bpa.pm ...skipping > >> >>>>> > > Error loading module /opt/xcat/lib/perl/xCAT_plugin/fsp.pm > >> >>>>> > ...skipping > >> >>>>> > > Error loading module /opt/xcat/lib/perl/xCAT_plugin/hmc.pm > >> >>>>> > ...skipping > >> >>>>> > > Error loading module /opt/xcat/lib/perl/xCAT_plugin/ivm.pm > >> >>>>> > ...skipping > >> >>>>> > > > >> >>>>> > > Shutting down vsftpd: [ OK > >> >>>>> > ] > >> >>>>> > > Starting vsftpd for vsftpd: [ OK > >> >>>>> > ] > >> >>>>> > > [ OK > >> >>>>> > > ] > >> >>>>> > > [root@l01 backups]# > >> >>>>> > > > >> >>>>> > > Any thoughts? > >> >>>>> > > > >> >>>>> > > Thanks, > >> >>>>> > > Luis > >> >>>>> > > > >> >>>>> > > > >> >>>>> > > >> >> > >> >> ------------------------------------------------------------------------------ > >> >> > >> >>>>> > > > >> >>>>> > > Got Input? Slashdot Needs You. > >> >>>>> > > Take our quick survey online. Come on, we don't ask for help > >> >>>>> > often. > >> >>>>> > > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >> >>>>> > > http://p.sf.net/sfu/slashdot-survey > >> >>>>> > > _______________________________________________ > >> >>>>> > > xCAT-user mailing list > >> >>>>> > > [email protected] > >> >>>>> > > https://lists.sourceforge.net/lists/listinfo/xcat-user > >> >>>>> > > > >> >>>>> > > > >> >>>>> > > > >> >>>>> > > > >> >>>>> > > >> >> > >> >> ------------------------------------------------------------------------------ > >> >> > >> >>>>> > > Got Input? Slashdot Needs You. > >> >>>>> > > Take our quick survey online. Come on, we don't ask for help > >> >>>>> > often. > >> >>>>> > > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >> >>>>> > > http://p.sf.net/sfu/slashdot-survey > >> >>>>> > > _______________________________________________ > >> >>>>> > > xCAT-user mailing list > >> >>>>> > > [email protected] > >> >>>>> > > https://lists.sourceforge.net/lists/listinfo/xcat-user > >> >>>>> > > > >> >>>>> > > >> >>>>> > > >> >> > >> >> ------------------------------------------------------------------------------ > >> >> > >> >>>>> > Got Input? Slashdot Needs You. > >> >>>>> > Take our quick survey online. Come on, we don't ask for help > >> >>>>> > often. > >> >>>>> > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >> >>>>> > http://p.sf.net/sfu/slashdot-survey > >> >>>>> > _______________________________________________ > >> >>>>> > xCAT-user mailing list > >> >>>>> > [email protected] > >> >>>>> > https://lists.sourceforge.net/lists/listinfo/xcat-user > >> >>>>> > > >> >>>>> > > >> >>>>> > > >> >> > >> >> ------------------------------------------------------------------------------ > >> >> > >> >>>>> > Got Input? Slashdot Needs You. > >> >>>>> > Take our quick survey online. Come on, we don't ask for help > >> >>>>> > often. > >> >>>>> > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >> >>>>> > http://p.sf.net/sfu/slashdot-survey > >> >>>>> > _______________________________________________ > >> >>>>> > xCAT-user mailing list > >> >>>>> > [email protected] > >> >>>>> > https://lists.sourceforge.net/lists/listinfo/xcat-user > >> >>>>> > > >> >>>>> > >> >> > >> >> ------------------------------------------------------------------------------ > >> >> > >> >>>>> Got Input? Slashdot Needs You. > >> >>>>> Take our quick survey online. Come on, we don't ask for help often. > >> >>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >> >>>>> http://p.sf.net/sfu/slashdot-survey > >> >>>>> _______________________________________________ xCAT-user mailing > >> >>>>> list > >> >> [email protected] > >> >> https://lists.sourceforge.net/lists/listinfo/xcat-user > >> >>>> > >> >>>> > >> >>>> > >> >>>> > >> >> > >> >> ------------------------------------------------------------------------------ > >> >> > >> >>>> Got Input? Slashdot Needs You. > >> >>>> Take our quick survey online. Come on, we don't ask for help often. > >> >>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >> >>>> http://p.sf.net/sfu/slashdot-survey > >> >>>> _______________________________________________ > >> >>>> xCAT-user mailing list > >> >>>> [email protected] > >> >>>> https://lists.sourceforge.net/lists/listinfo/xcat-user > >> >>>> > >> >>> > >> >> > >> >> > >> >> ------------------------------------------------------------------------------ > >> >> > >> >> Got Input? Slashdot Needs You. > >> >> Take our quick survey online. Come on, we don't ask for help often. > >> >> Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >> >> http://p.sf.net/sfu/slashdot-survey > >> >> _______________________________________________ > >> >> xCAT-user mailing list > >> >> [email protected] > >> >> https://lists.sourceforge.net/lists/listinfo/xcat-user > >> >> > >> >> ------------------------------------------------------------------------------ > >> >> Got Input? Slashdot Needs You. > >> >> Take our quick survey online. Come on, we don't ask for help often. > >> >> Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >> >> http://p.sf.net/sfu/slashdot-survey > >> >> _______________________________________________ > >> >> xCAT-user mailing list > >> >> [email protected] > >> >> https://lists.sourceforge.net/lists/listinfo/xcat-user > >> >> > >> > > >> > ------------------------------------------------------------------------------ > >> > Got Input? Slashdot Needs You. > >> > Take our quick survey online. Come on, we don't ask for help often. > >> > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >> > http://p.sf.net/sfu/slashdot-survey > >> > _______________________________________________ > >> > xCAT-user mailing list > >> > [email protected] > >> > https://lists.sourceforge.net/lists/listinfo/xcat-user > >> > > >> > ------------------------------------------------------------------------------ > >> > Got Input? Slashdot Needs You. > >> > Take our quick survey online. Come on, we don't ask for help often. > >> > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >> > http://p.sf.net/sfu/slashdot-survey > >> > > >> > _______________________________________________ > >> > xCAT-user mailing list > >> > [email protected] > >> > https://lists.sourceforge.net/lists/listinfo/xcat-user > >> > > >> > >> ------------------------------------------------------------------------------ > >> Got Input? Slashdot Needs You. > >> Take our quick survey online. Come on, we don't ask for help often. > >> Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >> http://p.sf.net/sfu/slashdot-survey > >> _______________________________________________ > >> xCAT-user mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/xcat-user > > > > > > > > ------------------------------------------------------------------------------ > > Got Input? Slashdot Needs You. > > Take our quick survey online. Come on, we don't ask for help often. > > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > > http://p.sf.net/sfu/slashdot-survey > > _______________________________________________ > > xCAT-user mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > > ------------------------------------------------------------------------------ > Got Input? Slashdot Needs You. > Take our quick survey online. Come on, we don't ask for help often. > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > http://p.sf.net/sfu/slashdot-survey > _______________________________________________ > xCAT-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ Got Input? Slashdot Needs You. Take our quick survey online. Come on, we don't ask for help often. Plus, you'll get a chance to win $100 to spend on ThinkGeek. http://p.sf.net/sfu/slashdot-survey _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
