I tried doing it but still no luck:
couldn't find the kernel file matched 2.6.32-71.29.1.el6.x86_64 in
/install/netboot/centos6/x86_64/kvm-test/rootimg/boot at ./genimage
line 62.
I listed that directory and...there's nothing inside:
[root@xcat centos]# ls /install/netboot/centos6/x86_64/kvm-test/rootimg/boot/
[root@xcat centos]#
Although i do have that kernel version in my /boot :o)
[root@xcat centos]# ls /boot/
config-2.6.32-71.29.1.el6.x86_64
initramfs-2.6.32-71.29.1.el6.x86_64.img lost+found
System.map-2.6.32-71.el6.x86_64
config-2.6.32-71.el6.x86_64 initramfs-2.6.32-71.el6.x86_64.img
symvers-2.6.32-71.29.1.el6.x86_64.gz
vmlinuz-2.6.32-71.29.1.el6.x86_64
efi
initrd-2.6.32-71.29.1.el6.x86_64kdump.img
symvers-2.6.32-71.el6.x86_64.gz vmlinuz-2.6.32-71.el6.x86_64
grub initrd-2.6.32-71.el6.x86_64kdump.img
System.map-2.6.32-71.29.1.el6.x86_64
[root@xcat centos]#
Best,
Luis
On Thu, Jul 28, 2011 at 9:16 PM, Luis Miguel Silva
<[email protected]> wrote:
> Hmm, weird! But i guess ill try it ;o)!
>
> Thanks,
> Luis Miguel Silva
>
> On Jul 28, 2011, at 9:02 PM, "heince.nvg" <[email protected]> wrote:
>
>> sorry for my poor english :p
>>
>> i used kvmtest instead of kvm as my profile name and its working.
>>
>> Regards,
>> Heince
>>
>> On Thu, 2011-07-28 at 20:09 -0600, Luis Miguel Silva wrote:
>>> I'm sorry, i didnt catch that :o).
>>>
>>> What do you mean by "it's fail but using different profile name
>>> (kvmtest) is working"??
>>>
>>> Thanks!
>>> Luis
>>>
>>> On Thu, Jul 28, 2011 at 8:02 PM, heince.nvg <[email protected]> wrote:
>>>> I also got 'cat: write error: Broken pipe' , but it's working.
>>>>
>>>> for netbooting kvm, i just tested using kvm profile name, it's fail but
>>>> using different profile name (kvmtest) is working.
>>>>
>>>> Regards,
>>>> Heince
>>>>
>>>> On Thu, 2011-07-28 at 13:38 -0600, Luis Miguel Silva wrote:
>>>>> Heince,
>>>>>
>>>>> Here's whats happening in my environment (after i copied the dracut
>>>>> directory and pkglists from rh!).
>>>>>
>>>>> When i try to genimage the compute profile:
>>>>> packimage -o centos5.2 -p compute -a x86_64
>>>>>
>>>>>
>>>>> [root@xcat centos]# ./genimage -i eth0 -n e1000,bnx2 -o centos6 -p compute
>>>>> yum -y -c /tmp/genimage.10038.yum.conf
>>>>> --installroot=/install/netboot/centos6/x86_64/compute/rootimg/
>>>>> --disablerepo=* --enablerepo=centos6-x86_64-0 install bash
>>>>> dracut-network nfs-utils openssl dhclient kernel openssh-server
>>>>> openssh-clients wget vim-minimal ntp rpm rsync rsyslog
>>>>> centos6-x86_64-0
>>>>>
>>>>> | 3.7 kB 00:00 ...
>>>>> Setting up Install Process
>>>>> Package bash-4.1.2-3.el6.x86_64 already installed and latest version
>>>>> Package 1:nfs-utils-1.2.2-7.el6.x86_64 already installed and latest
>>>>> version
>>>>> Package openssl-1.0.0-4.el6.x86_64 already installed and latest version
>>>>> Package 12:dhclient-4.1.1-12.P1.el6.x86_64 already installed and latest
>>>>> version
>>>>> Package kernel-2.6.32-71.el6.x86_64 already installed and latest version
>>>>> Package openssh-server-5.3p1-20.el6.x86_64 already installed and latest
>>>>> version
>>>>> Package openssh-clients-5.3p1-20.el6.x86_64 already installed and latest
>>>>> version
>>>>> Package wget-1.12-1.4.el6.x86_64 already installed and latest version
>>>>> Package rsync-3.0.6-5.el6.x86_64 already installed and latest version
>>>>> Resolving Dependencies
>>>>> --> Running transaction check
>>>>> ---> Package dracut-network.noarch 0:004-32.el6 set to be updated
>>>>> --> Processing Dependency: bridge-utils for package:
>>>>> dracut-network-004-32.el6.noarch
>>>>> --> Processing Dependency: vconfig for package:
>>>>> dracut-network-004-32.el6.noarch
>>>>> --> Processing Dependency: iscsi-initiator-utils for package:
>>>>> dracut-network-004-32.el6.noarch
>>>>> ---> Package ntp.x86_64 0:4.2.4p8-2.el6 set to be updated
>>>>> --> Processing Dependency: ntpdate = 4.2.4p8-2.el6 for package:
>>>>> ntp-4.2.4p8-2.el6.x86_64
>>>>> ---> Package rpm.x86_64 0:4.8.0-12.el6 set to be updated
>>>>> --> Processing Dependency: curl for package: rpm-4.8.0-12.el6.x86_64
>>>>> --> Processing Dependency: db4-utils for package: rpm-4.8.0-12.el6.x86_64
>>>>> --> Processing Dependency: liblua-5.1.so()(64bit) for package:
>>>>> rpm-4.8.0-12.el6.x86_64
>>>>> --> Processing Dependency: libelf.so.1()(64bit) for package:
>>>>> rpm-4.8.0-12.el6.x86_64
>>>>> --> Processing Dependency: librpmbuild.so.1()(64bit) for package:
>>>>> rpm-4.8.0-12.el6.x86_64
>>>>> --> Processing Dependency: librpmio.so.1()(64bit) for package:
>>>>> rpm-4.8.0-12.el6.x86_64
>>>>> --> Processing Dependency: liblzma.so.0()(64bit) for package:
>>>>> rpm-4.8.0-12.el6.x86_64
>>>>> --> Processing Dependency: libmagic.so.1()(64bit) for package:
>>>>> rpm-4.8.0-12.el6.x86_64
>>>>> --> Processing Dependency: librpm.so.1()(64bit) for package:
>>>>> rpm-4.8.0-12.el6.x86_64
>>>>> ---> Package rsyslog.x86_64 0:4.6.2-2.el6 set to be updated
>>>>> --> Processing Dependency: logrotate >= 3.5.2 for package:
>>>>> rsyslog-4.6.2-2.el6.x86_64
>>>>> ---> Package vim-minimal.x86_64 2:7.2.411-1.4.el6 set to be updated
>>>>> --> Running transaction check
>>>>> ---> Package bridge-utils.x86_64 0:1.2-9.el6 set to be updated
>>>>> ---> Package curl.x86_64 0:7.19.7-16.el6 set to be updated
>>>>> --> Processing Dependency: libcurl = 7.19.7-16.el6 for package:
>>>>> curl-7.19.7-16.el6.x86_64
>>>>> --> Processing Dependency: libcurl.so.4()(64bit) for package:
>>>>> curl-7.19.7-16.el6.x86_64
>>>>> --> Processing Dependency: libssh2.so.1()(64bit) for package:
>>>>> curl-7.19.7-16.el6.x86_64
>>>>> ---> Package db4-utils.x86_64 0:4.7.25-16.el6 set to be updated
>>>>> ---> Package elfutils-libelf.x86_64 0:0.148-1.el6 set to be updated
>>>>> ---> Package file-libs.x86_64 0:5.04-5.el6 set to be updated
>>>>> ---> Package iscsi-initiator-utils.x86_64 0:6.2.0.872-10.el6 set to be
>>>>> updated
>>>>> ---> Package logrotate.x86_64 0:3.7.8-12.el6 set to be updated
>>>>> ---> Package lua.x86_64 0:5.1.4-4.1.el6 set to be updated
>>>>> ---> Package ntpdate.x86_64 0:4.2.4p8-2.el6 set to be updated
>>>>> ---> Package rpm-libs.x86_64 0:4.8.0-12.el6 set to be updated
>>>>> ---> Package vconfig.x86_64 0:1.9-8.1.el6 set to be updated
>>>>> ---> Package xz-libs.x86_64 0:4.999.9-0.3.beta.20091007git.el6 set to be
>>>>> updated
>>>>> --> Running transaction check
>>>>> ---> Package libcurl.x86_64 0:7.19.7-16.el6 set to be updated
>>>>> ---> Package libssh2.x86_64 0:1.2.2-7.el6 set to be updated
>>>>> --> Finished Dependency Resolution
>>>>>
>>>>> Dependencies Resolved
>>>>>
>>>>> =============================================================================================================================================================================
>>>>> Package Arch
>>>>> Version Repository
>>>>> Size
>>>>> =============================================================================================================================================================================
>>>>> Installing:
>>>>> dracut-network noarch
>>>>> 004-32.el6
>>>>> centos6-x86_64-0 48 k
>>>>> ntp x86_64
>>>>> 4.2.4p8-2.el6
>>>>> centos6-x86_64-0 445 k
>>>>> rpm x86_64
>>>>> 4.8.0-12.el6
>>>>> centos6-x86_64-0 897 k
>>>>> rsyslog x86_64
>>>>> 4.6.2-2.el6
>>>>> centos6-x86_64-0 401 k
>>>>> vim-minimal x86_64
>>>>> 2:7.2.411-1.4.el6
>>>>> centos6-x86_64-0 365 k
>>>>> Installing for dependencies:
>>>>> bridge-utils x86_64
>>>>> 1.2-9.el6
>>>>> centos6-x86_64-0 30 k
>>>>> curl x86_64
>>>>> 7.19.7-16.el6
>>>>> centos6-x86_64-0 190 k
>>>>> db4-utils x86_64
>>>>> 4.7.25-16.el6
>>>>> centos6-x86_64-0 130 k
>>>>> elfutils-libelf x86_64
>>>>> 0.148-1.el6
>>>>> centos6-x86_64-0 162 k
>>>>> file-libs x86_64
>>>>> 5.04-5.el6
>>>>> centos6-x86_64-0 308 k
>>>>> iscsi-initiator-utils x86_64
>>>>> 6.2.0.872-10.el6
>>>>> centos6-x86_64-0 560 k
>>>>> libcurl x86_64
>>>>> 7.19.7-16.el6
>>>>> centos6-x86_64-0 161 k
>>>>> libssh2 x86_64
>>>>> 1.2.2-7.el6
>>>>> centos6-x86_64-0 75 k
>>>>> logrotate x86_64
>>>>> 3.7.8-12.el6
>>>>> centos6-x86_64-0 53 k
>>>>> lua x86_64
>>>>> 5.1.4-4.1.el6
>>>>> centos6-x86_64-0 184 k
>>>>> ntpdate x86_64
>>>>> 4.2.4p8-2.el6
>>>>> centos6-x86_64-0 58 k
>>>>> rpm-libs x86_64
>>>>> 4.8.0-12.el6
>>>>> centos6-x86_64-0 307 k
>>>>> vconfig x86_64
>>>>> 1.9-8.1.el6
>>>>> centos6-x86_64-0 50 k
>>>>> xz-libs x86_64
>>>>> 4.999.9-0.3.beta.20091007git.el6
>>>>> centos6-x86_64-0 89 k
>>>>>
>>>>> Transaction Summary
>>>>> =============================================================================================================================================================================
>>>>> Install 19 Package(s)
>>>>> Upgrade 0 Package(s)
>>>>>
>>>>> Total download size: 4.4 M
>>>>> Installed size: 13 M
>>>>> Downloading Packages:
>>>>> -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>>>> Total
>>>>>
>>>>> 60 MB/s | 4.4 MB 00:00
>>>>> Running rpm_check_debug
>>>>> Running Transaction Test
>>>>> Transaction Test Succeeded
>>>>> Running Transaction
>>>>> Installing : file-libs-5.04-5.el6.x86_64
>>>>>
>>>>> 1/19
>>>>> Installing : libssh2-1.2.2-7.el6.x86_64
>>>>>
>>>>> 2/19
>>>>> Installing : elfutils-libelf-0.148-1.el6.x86_64
>>>>>
>>>>> 3/19
>>>>> Installing : xz-libs-4.999.9-0.3.beta.20091007git.el6.x86_64
>>>>>
>>>>> 4/19
>>>>> Installing : lua-5.1.4-4.1.el6.x86_64
>>>>>
>>>>> 5/19
>>>>> Installing : libcurl-7.19.7-16.el6.x86_64
>>>>>
>>>>> 6/19
>>>>> Installing : curl-7.19.7-16.el6.x86_64
>>>>>
>>>>> 7/19
>>>>> Installing : iscsi-initiator-utils-6.2.0.872-10.el6.x86_64
>>>>>
>>>>> 8/19
>>>>> Installing : vconfig-1.9-8.1.el6.x86_64
>>>>>
>>>>> 9/19
>>>>> Installing : bridge-utils-1.2-9.el6.x86_64
>>>>>
>>>>> 10/19
>>>>> Installing : logrotate-3.7.8-12.el6.x86_64
>>>>>
>>>>> 11/19
>>>>> Installing : ntpdate-4.2.4p8-2.el6.x86_64
>>>>>
>>>>> 12/19
>>>>> Installing : db4-utils-4.7.25-16.el6.x86_64
>>>>>
>>>>> 13/19
>>>>> Installing : rpm-libs-4.8.0-12.el6.x86_64
>>>>>
>>>>> 14/19
>>>>> Installing : rpm-4.8.0-12.el6.x86_64
>>>>>
>>>>> 15/19
>>>>> Installing : ntp-4.2.4p8-2.el6.x86_64
>>>>>
>>>>> 16/19
>>>>> Installing : rsyslog-4.6.2-2.el6.x86_64
>>>>>
>>>>> 17/19
>>>>> Installing : 2:vim-minimal-7.2.411-1.4.el6.x86_64
>>>>>
>>>>> 18/19
>>>>> Installing : dracut-network-004-32.el6.noarch
>>>>>
>>>>> 19/19
>>>>>
>>>>> Installed:
>>>>> dracut-network.noarch 0:004-32.el6 ntp.x86_64 0:4.2.4p8-2.el6
>>>>> rpm.x86_64 0:4.8.0-12.el6 rsyslog.x86_64 0:4.6.2-2.el6
>>>>> vim-minimal.x86_64 2:7.2.411-1.4.el6
>>>>>
>>>>> Dependency Installed:
>>>>> bridge-utils.x86_64 0:1.2-9.el6 curl.x86_64 0:7.19.7-16.el6
>>>>> db4-utils.x86_64 0:4.7.25-16.el6
>>>>> elfutils-libelf.x86_64 0:0.148-1.el6
>>>>> file-libs.x86_64 0:5.04-5.el6 iscsi-initiator-utils.x86_64
>>>>> 0:6.2.0.872-10.el6 libcurl.x86_64 0:7.19.7-16.el6
>>>>> libssh2.x86_64 0:1.2.2-7.el6
>>>>> logrotate.x86_64 0:3.7.8-12.el6 lua.x86_64 0:5.1.4-4.1.el6
>>>>> ntpdate.x86_64 0:4.2.4p8-2.el6
>>>>> rpm-libs.x86_64 0:4.8.0-12.el6
>>>>> vconfig.x86_64 0:1.9-8.1.el6 xz-libs.x86_64
>>>>> 0:4.999.9-0.3.beta.20091007git.el6
>>>>>
>>>>> Complete!
>>>>> cat: write error: Broken pipe
>>>>> cat: write error: Broken pipe
>>>>> cat: write error: Broken pipe
>>>>>
>>>>> the initial ramdisk for statelite is generated successfully.
>>>>> cat: write error: Broken pipe
>>>>> cat: write error: Broken pipe
>>>>> cat: write error: Broken pipe
>>>>>
>>>>> And when i run genimage on the "kvm" profile:
>>>>> "couldn't find the kernel file matched 2.6.32-71.29.1.el6.x86_64 in
>>>>> /install/netboot/centos6/x86_64/kvm/rootimg/boot at ./genimage line
>>>>> 62."
>>>>>
>>>>> FYI, this is what i did:
>>>>> - copied dracut from "rh" to "centos"
>>>>> - created some symlinks on centos/:
>>>>> lrwxrwxrwx 1 root root 27 Jul 28 13:36 compute.pkglist ->
>>>>> ../rh/compute.rhel6.pkglist
>>>>> lrwxrwxrwx 1 root root 24 Jul 28 13:35 kvm.pkglist ->
>>>>> ../rh/kvm.rhels6.pkglist
>>>>>
>>>>> Any thoughts?
>>>>>
>>>>> Thanks,
>>>>> Luis
>>>>>
>>>>> On Thu, Jul 28, 2011 at 12:12 PM, Luis Miguel Silva
>>>>> <[email protected]> wrote:
>>>>>> Hmm, interesting!
>>>>>> Thanks for the tip! ;o))
>>>>>>
>>>>>> Luis Miguel Silva
>>>>>> On Jul 28, 2011, at 12:01 PM, "heince.nvg" <[email protected]> wrote:
>>>>>>
>>>>>> haha strange, i didn't have that warnings.
>>>>>>
>>>>>> - i have no problem installing centos6 kvm because my server support it,
>>>>>> bridging also no issue
>>>>>> - centos6 netboot, this is what i do to make it work:
>>>>>> * copy rhel6 pkglist to centos
>>>>>> * copy dracut folder on rh folder to centos folder
>>>>>> * i think the problem because rh6 didn't use busybox-anaconda anymore,
>>>>>> so
>>>>>> you have to feed it using dracut
>>>>>> * genimage ...
>>>>>> * packimage ...
>>>>>> * nodeset [node] netboot
>>>>>> * boot it
>>>>>>
>>>>>> - i haven't tried netboot centos 6 kvm
>>>>>>
>>>>>> Regards,
>>>>>> Heince
>>>>>>
>>>>>> On Thu, 2011-07-28 at 11:54 -0600, Luis Miguel Silva wrote:
>>>>>>
>>>>>> I have no problem with the warnings! :o)
>>>>>> Just wanted to report what is happening to check if it is normal or not!
>>>>>> ;o)
>>>>>>
>>>>>> I now understand it is not critical!
>>>>>>
>>>>>> Thanks,
>>>>>> Luis
>>>>>>
>>>>>> On Thu, Jul 28, 2011 at 11:41 AM, Lissa Valletta <[email protected]>
>>>>>> wrote:
>>>>>>> If you want to stop the warning, take each one and for example:
>>>>>>> mv /opt/xcat/lib/perl/xCAT_plugin/fsp.pm
>>>>>>> /opt/xcat/lib/perl/xCAT_plugin/fsp.pm.save
>>>>>>>
>>>>>>> You don't need them for x-series.
>>>>>>>
>>>>>>> Lissa K. Valletta
>>>>>>> 2-3/T12
>>>>>>> Poughkeepsie, NY 12601
>>>>>>> (tie 293) 433-3102
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> From: Luis Miguel Silva <[email protected]>
>>>>>>> To: xCAT Users Mailing list <[email protected]>
>>>>>>> Date: 07/28/2011 11:46 AM
>>>>>>> Subject: Re: [xcat-user] xCAT complains about certain modules
>>>>>>> (fsp.pm,
>>>>>>> hmc.pm and ivm.pm) on restart
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> By the way, regarding the modules, i have them too!
>>>>>>> (and i'm using the same snapshot you are :o)).
>>>>>>>
>>>>>>> The problem is that xCAT complains about them at start up ;o).
>>>>>>> (service xcatd restart)
>>>>>>>
>>>>>>> Thanks!
>>>>>>> Luis
>>>>>>>
>>>>>>> On Thu, Jul 28, 2011 at 9:42 AM, Luis Miguel Silva
>>>>>>> <[email protected]> wrote:
>>>>>>>> Heince,
>>>>>>>>
>>>>>>>> Thanks!
>>>>>>>>
>>>>>>>> On an unrelated topic...how well is it working for you? (CentOS 6 +
>>>>>>>> xCAT
>>>>>>> 2.6)?
>>>>>>>>
>>>>>>>> According to my tests, i'm having trouble running:
>>>>>>>> - installing centos6 kvm -> did not have kvm support! :o( [the kvm
>>>>>>>> modules were there but were not loaded and it didnt set up a bridge
>>>>>>>> interface for me)
>>>>>>>> - netbooting centos6 compute -> failed (genimage for this profile
>>>>>>>> failed so i could not pack the image)
>>>>>>>> - netbooting centos6 kvm -> failed (genimage threw some errors but
>>>>>>>> seemed to complete so i ran "packimage". But now when itry to net boot
>>>>>>>> from it it complains asking if i ran genimage before running
>>>>>>>> packimage)...
>>>>>>>>
>>>>>>>> Are you, by any chance, provisioning these images in your system? :o)
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Luis
>>>>>>>>
>>>>>>>> On Thu, Jul 28, 2011 at 9:32 AM, heince.nvg <[email protected]>
>>>>>>>> wrote:
>>>>>>>>> Hi Luis :o)
>>>>>>>>>
>>>>>>>>> i'm also using CentOS 6,
>>>>>>>>> i have those modules using xCAT-server-2.6.2-snap201107192304
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>> Heince
>>>>>>>>>
>>>>>>>>> On Thu, 2011-07-28 at 08:39 -0600, Luis Miguel Silva wrote:
>>>>>>>>>> Thank you!
>>>>>>>>>>
>>>>>>>>>> Luis Miguel Silva
>>>>>>>>>>
>>>>>>>>>> On Jul 28, 2011, at 2:02 AM, Xiao Peng Wang <[email protected]> wrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> It's a problem for Centos6 and rh6. But these perl modules are not
>>>>>>>>>>> needed for x86/x86_64 system. You can ignore it as a message error.
>>>>>>>>>>>
>>>>>>>>>>> Thanks
>>>>>>>>>>> Best Regards
>>>>>>>>>>>
>>>>>>> ----------------------------------------------------------------------
>>>>>>>>>>> Wang Xiaopeng (王晓朋)
>>>>>>>>>>> IBM China System Technology Laboratory
>>>>>>>>>>> Tel: 86-10-82453455
>>>>>>>>>>> Email: [email protected]
>>>>>>>>>>> Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road,
>>>>>>>>>>> Haidian District Beijing P.R.China 100193
>>>>>>>>>>>
>>>>>>>>>>> <graycol.gif>Luis Miguel Silva ---2011-07-28 03:34:59---Lisa, This
>>>>>>>>>>> is what i have:
>>>>>>>>>>>
>>>>>>>>>>> From: Luis Miguel Silva <[email protected]>
>>>>>>>>>>> To: xCAT Users Mailing list <[email protected]>
>>>>>>>>>>> Date: 2011-07-28 03:34
>>>>>>>>>>> Subject: Re: [xcat-user] xCAT complains about certain modules
>>>>>>>>>>> (fsp.pm, hmc.pm and ivm.pm) on restart
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> ____________________________________________________________________
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Lisa,
>>>>>>>>>>>
>>>>>>>>>>> This is what i have:
>>>>>>>>>>> [root@xcat ~]# nodels -v
>>>>>>>>>>> Version 2.6.2 (svn r10120, built Tue Jul 19 23:03:39 EDT 2011)
>>>>>>>>>>> [root@xcat ~]#
>>>>>>>>>>>
>>>>>>>>>>> [root@xcat ~]# cat /etc/yum.repos.d/xCAT-*
>>>>>>>>>>> [xcat-2-core]
>>>>>>>>>>> name=xCAT 2 Core packages
>>>>>>>>>>> baseurl=http://xcat.sourceforge.net/yum/2.6/xcat-core
>>>>>>>>>>> enabled=1
>>>>>>>>>>> gpgcheck=1
>>>>>>>>>>>
>>>>>>>
>>>>>>> gpgkey=http://xcat.sourceforge.net/yum/2.6/xcat-core/repodata/repomd.xml.key
>>>>>>>
>>>>>>>>>>> [xcat-dep]
>>>>>>>>>>> name=xCAT 2 depedencies
>>>>>>>>>>> baseurl=http://xcat.sourceforge.net/yum/xcat-dep/rh5/x86_64
>>>>>>>>>>> enabled=1
>>>>>>>>>>> gpgcheck=1
>>>>>>>>>>>
>>>>>>>
>>>>>>> gpgkey=http://xcat.sourceforge.net/yum/xcat-dep/rh5/x86_64/repodata/repomd.xml.key
>>>>>>>
>>>>>>>>>>> [root@xcat ~]#
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Thanks,
>>>>>>>>>>> Luis
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Jul 27, 2011 at 1:23 PM, Lissa Valletta <[email protected]>
>>>>>>>>>>> wrote:
>>>>>>>>>>>> Could you run nodels -v? Also did you put on the lastest deps
>>>>>>>>>>> package?
>>>>>>>>>>>> But also we have not tested anything on Centos 6. Check our home
>>>>>>>>>>> page.
>>>>>>>>>>>> Centos 5 is the last supported level.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Lissa K. Valletta
>>>>>>>>>>>> 2-3/T12
>>>>>>>>>>>> Poughkeepsie, NY 12601
>>>>>>>>>>>> (tie 293) 433-3102
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> From: Luis Miguel Silva <[email protected]>
>>>>>>>>>>>> To: xCAT Users Mailing list <[email protected]>
>>>>>>>>>>>> Date: 07/27/2011 12:24 PM
>>>>>>>>>>>> Subject: [xcat-user] xCAT complains about certain modules
>>>>>>>>>>> (fsp.pm,
>>>>>>>>>>>> hmc.pm and ivm.pm) on restart
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Dear all,
>>>>>>>>>>>>
>>>>>>>>>>>> I just reinstalled one of my xCAT systems with CentOS 6 and xCAT
>>>>>>>>>>> 2.6.x
>>>>>>>>>>>> (from the daily snapshots repo) and i'm getting this error:
>>>>>>>>>>>> [root@l01 backups]# /etc/init.d/xcatd restart
>>>>>>>>>>>> Restarting xCATd Error loading module
>>>>>>>>>>>> /opt/xcat/lib/perl/xCAT_plugin/bpa.pm ...skipping
>>>>>>>>>>>> Error loading module /opt/xcat/lib/perl/xCAT_plugin/fsp.pm
>>>>>>>>>>> ...skipping
>>>>>>>>>>>> Error loading module /opt/xcat/lib/perl/xCAT_plugin/hmc.pm
>>>>>>>>>>> ...skipping
>>>>>>>>>>>> Error loading module /opt/xcat/lib/perl/xCAT_plugin/ivm.pm
>>>>>>>>>>> ...skipping
>>>>>>>>>>>>
>>>>>>>>>>>> Shutting down vsftpd: [ OK
>>>>>>>>>>> ]
>>>>>>>>>>>> Starting vsftpd for vsftpd: [ OK
>>>>>>>>>>> ]
>>>>>>>>>>>> [ OK ]
>>>>>>>>>>>> [root@l01 backups]#
>>>>>>>>>>>>
>>>>>>>>>>>> Any thoughts?
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks,
>>>>>>>>>>>> Luis
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Got Input? Slashdot Needs You.
>>>>>>>>>>>> Take our quick survey online. Come on, we don't ask for help
>>>>>>>>>>> often.
>>>>>>>>>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>>>>>>>>> http://p.sf.net/sfu/slashdot-survey
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> xCAT-user mailing list
>>>>>>>>>>>> [email protected]
>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>>
>>>>>>>>>>>> Got Input? Slashdot Needs You.
>>>>>>>>>>>> Take our quick survey online. Come on, we don't ask for help
>>>>>>>>>>> often.
>>>>>>>>>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>>>>>>>>> http://p.sf.net/sfu/slashdot-survey
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> xCAT-user mailing list
>>>>>>>>>>>> [email protected]
>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>>
>>>>>>>>>>> Got Input? Slashdot Needs You.
>>>>>>>>>>> Take our quick survey online. Come on, we don't ask for help often.
>>>>>>>>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>>>>>>>> http://p.sf.net/sfu/slashdot-survey
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> xCAT-user mailing list
>>>>>>>>>>> [email protected]
>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>>
>>>>>>>>>>> Got Input? Slashdot Needs You.
>>>>>>>>>>> Take our quick survey online. Come on, we don't ask for help often.
>>>>>>>>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>>>>>>>> http://p.sf.net/sfu/slashdot-survey
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> xCAT-user mailing list
>>>>>>>>>>> [email protected]
>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>>
>>>>>>>>>> Got Input? Slashdot Needs You.
>>>>>>>>>> Take our quick survey online. Come on, we don't ask for help often.
>>>>>>>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>>>>>>> http://p.sf.net/sfu/slashdot-survey
>>>>>>>>>> _______________________________________________ xCAT-user mailing
>>>>>>>>>> list
>>>>>>> [email protected]
>>>>>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>>
>>>>>>>>> Got Input? Slashdot Needs You.
>>>>>>>>> Take our quick survey online. Come on, we don't ask for help often.
>>>>>>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>>>>>> http://p.sf.net/sfu/slashdot-survey
>>>>>>>>> _______________________________________________
>>>>>>>>> xCAT-user mailing list
>>>>>>>>> [email protected]
>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>>
>>>>>>> Got Input? Slashdot Needs You.
>>>>>>> Take our quick survey online. Come on, we don't ask for help often.
>>>>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>>>> http://p.sf.net/sfu/slashdot-survey
>>>>>>> _______________________________________________
>>>>>>> xCAT-user mailing list
>>>>>>> [email protected]
>>>>>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>> Got Input? Slashdot Needs You.
>>>>>>> Take our quick survey online. Come on, we don't ask for help often.
>>>>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>>>> http://p.sf.net/sfu/slashdot-survey
>>>>>>> _______________________________________________
>>>>>>> xCAT-user mailing list
>>>>>>> [email protected]
>>>>>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>>>>
>>>>>>
>>>>>> ------------------------------------------------------------------------------
>>>>>> Got Input? Slashdot Needs You.
>>>>>> Take our quick survey online. Come on, we don't ask for help often.
>>>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>>> http://p.sf.net/sfu/slashdot-survey
>>>>>> _______________________________________________
>>>>>> xCAT-user mailing list
>>>>>> [email protected]
>>>>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>>>
>>>>>> ------------------------------------------------------------------------------
>>>>>> Got Input? Slashdot Needs You.
>>>>>> Take our quick survey online. Come on, we don't ask for help often.
>>>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>>> http://p.sf.net/sfu/slashdot-survey
>>>>>>
>>>>>> _______________________________________________
>>>>>> xCAT-user mailing list
>>>>>> [email protected]
>>>>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> Got Input? Slashdot Needs You.
>>>>> Take our quick survey online. Come on, we don't ask for help often.
>>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>>> http://p.sf.net/sfu/slashdot-survey
>>>>> _______________________________________________
>>>>> xCAT-user mailing list
>>>>> [email protected]
>>>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------------
>>>> Got Input? Slashdot Needs You.
>>>> Take our quick survey online. Come on, we don't ask for help often.
>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>>> http://p.sf.net/sfu/slashdot-survey
>>>> _______________________________________________
>>>> xCAT-user mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>>>
>>>
>>> ------------------------------------------------------------------------------
>>> Got Input? Slashdot Needs You.
>>> Take our quick survey online. Come on, we don't ask for help often.
>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>>> http://p.sf.net/sfu/slashdot-survey
>>> _______________________________________________
>>> xCAT-user mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Got Input? Slashdot Needs You.
>> Take our quick survey online. Come on, we don't ask for help often.
>> Plus, you'll get a chance to win $100 to spend on ThinkGeek.
>> http://p.sf.net/sfu/slashdot-survey
>> _______________________________________________
>> xCAT-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
------------------------------------------------------------------------------
Got Input? Slashdot Needs You.
Take our quick survey online. Come on, we don't ask for help often.
Plus, you'll get a chance to win $100 to spend on ThinkGeek.
http://p.sf.net/sfu/slashdot-survey
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
