I also got 'cat: write error: Broken pipe' , but it's working. for netbooting kvm, i just tested using kvm profile name, it's fail but using different profile name (kvmtest) is working.
Regards, Heince On Thu, 2011-07-28 at 13:38 -0600, Luis Miguel Silva wrote: > Heince, > > Here's whats happening in my environment (after i copied the dracut > directory and pkglists from rh!). > > When i try to genimage the compute profile: > packimage -o centos5.2 -p compute -a x86_64 > > > [root@xcat centos]# ./genimage -i eth0 -n e1000,bnx2 -o centos6 -p compute > yum -y -c /tmp/genimage.10038.yum.conf > --installroot=/install/netboot/centos6/x86_64/compute/rootimg/ > --disablerepo=* --enablerepo=centos6-x86_64-0 install bash > dracut-network nfs-utils openssl dhclient kernel openssh-server > openssh-clients wget vim-minimal ntp rpm rsync rsyslog > centos6-x86_64-0 > > | 3.7 kB 00:00 ... > Setting up Install Process > Package bash-4.1.2-3.el6.x86_64 already installed and latest version > Package 1:nfs-utils-1.2.2-7.el6.x86_64 already installed and latest version > Package openssl-1.0.0-4.el6.x86_64 already installed and latest version > Package 12:dhclient-4.1.1-12.P1.el6.x86_64 already installed and latest > version > Package kernel-2.6.32-71.el6.x86_64 already installed and latest version > Package openssh-server-5.3p1-20.el6.x86_64 already installed and latest > version > Package openssh-clients-5.3p1-20.el6.x86_64 already installed and latest > version > Package wget-1.12-1.4.el6.x86_64 already installed and latest version > Package rsync-3.0.6-5.el6.x86_64 already installed and latest version > Resolving Dependencies > --> Running transaction check > ---> Package dracut-network.noarch 0:004-32.el6 set to be updated > --> Processing Dependency: bridge-utils for package: > dracut-network-004-32.el6.noarch > --> Processing Dependency: vconfig for package: > dracut-network-004-32.el6.noarch > --> Processing Dependency: iscsi-initiator-utils for package: > dracut-network-004-32.el6.noarch > ---> Package ntp.x86_64 0:4.2.4p8-2.el6 set to be updated > --> Processing Dependency: ntpdate = 4.2.4p8-2.el6 for package: > ntp-4.2.4p8-2.el6.x86_64 > ---> Package rpm.x86_64 0:4.8.0-12.el6 set to be updated > --> Processing Dependency: curl for package: rpm-4.8.0-12.el6.x86_64 > --> Processing Dependency: db4-utils for package: rpm-4.8.0-12.el6.x86_64 > --> Processing Dependency: liblua-5.1.so()(64bit) for package: > rpm-4.8.0-12.el6.x86_64 > --> Processing Dependency: libelf.so.1()(64bit) for package: > rpm-4.8.0-12.el6.x86_64 > --> Processing Dependency: librpmbuild.so.1()(64bit) for package: > rpm-4.8.0-12.el6.x86_64 > --> Processing Dependency: librpmio.so.1()(64bit) for package: > rpm-4.8.0-12.el6.x86_64 > --> Processing Dependency: liblzma.so.0()(64bit) for package: > rpm-4.8.0-12.el6.x86_64 > --> Processing Dependency: libmagic.so.1()(64bit) for package: > rpm-4.8.0-12.el6.x86_64 > --> Processing Dependency: librpm.so.1()(64bit) for package: > rpm-4.8.0-12.el6.x86_64 > ---> Package rsyslog.x86_64 0:4.6.2-2.el6 set to be updated > --> Processing Dependency: logrotate >= 3.5.2 for package: > rsyslog-4.6.2-2.el6.x86_64 > ---> Package vim-minimal.x86_64 2:7.2.411-1.4.el6 set to be updated > --> Running transaction check > ---> Package bridge-utils.x86_64 0:1.2-9.el6 set to be updated > ---> Package curl.x86_64 0:7.19.7-16.el6 set to be updated > --> Processing Dependency: libcurl = 7.19.7-16.el6 for package: > curl-7.19.7-16.el6.x86_64 > --> Processing Dependency: libcurl.so.4()(64bit) for package: > curl-7.19.7-16.el6.x86_64 > --> Processing Dependency: libssh2.so.1()(64bit) for package: > curl-7.19.7-16.el6.x86_64 > ---> Package db4-utils.x86_64 0:4.7.25-16.el6 set to be updated > ---> Package elfutils-libelf.x86_64 0:0.148-1.el6 set to be updated > ---> Package file-libs.x86_64 0:5.04-5.el6 set to be updated > ---> Package iscsi-initiator-utils.x86_64 0:6.2.0.872-10.el6 set to be updated > ---> Package logrotate.x86_64 0:3.7.8-12.el6 set to be updated > ---> Package lua.x86_64 0:5.1.4-4.1.el6 set to be updated > ---> Package ntpdate.x86_64 0:4.2.4p8-2.el6 set to be updated > ---> Package rpm-libs.x86_64 0:4.8.0-12.el6 set to be updated > ---> Package vconfig.x86_64 0:1.9-8.1.el6 set to be updated > ---> Package xz-libs.x86_64 0:4.999.9-0.3.beta.20091007git.el6 set to be > updated > --> Running transaction check > ---> Package libcurl.x86_64 0:7.19.7-16.el6 set to be updated > ---> Package libssh2.x86_64 0:1.2.2-7.el6 set to be updated > --> Finished Dependency Resolution > > Dependencies Resolved > > ============================================================================================================================================================================= > Package Arch > Version Repository > Size > ============================================================================================================================================================================= > Installing: > dracut-network noarch > 004-32.el6 > centos6-x86_64-0 48 k > ntp x86_64 > 4.2.4p8-2.el6 > centos6-x86_64-0 445 k > rpm x86_64 > 4.8.0-12.el6 > centos6-x86_64-0 897 k > rsyslog x86_64 > 4.6.2-2.el6 > centos6-x86_64-0 401 k > vim-minimal x86_64 > 2:7.2.411-1.4.el6 > centos6-x86_64-0 365 k > Installing for dependencies: > bridge-utils x86_64 > 1.2-9.el6 > centos6-x86_64-0 30 k > curl x86_64 > 7.19.7-16.el6 > centos6-x86_64-0 190 k > db4-utils x86_64 > 4.7.25-16.el6 > centos6-x86_64-0 130 k > elfutils-libelf x86_64 > 0.148-1.el6 > centos6-x86_64-0 162 k > file-libs x86_64 > 5.04-5.el6 > centos6-x86_64-0 308 k > iscsi-initiator-utils x86_64 > 6.2.0.872-10.el6 > centos6-x86_64-0 560 k > libcurl x86_64 > 7.19.7-16.el6 > centos6-x86_64-0 161 k > libssh2 x86_64 > 1.2.2-7.el6 > centos6-x86_64-0 75 k > logrotate x86_64 > 3.7.8-12.el6 > centos6-x86_64-0 53 k > lua x86_64 > 5.1.4-4.1.el6 > centos6-x86_64-0 184 k > ntpdate x86_64 > 4.2.4p8-2.el6 > centos6-x86_64-0 58 k > rpm-libs x86_64 > 4.8.0-12.el6 > centos6-x86_64-0 307 k > vconfig x86_64 > 1.9-8.1.el6 > centos6-x86_64-0 50 k > xz-libs x86_64 > 4.999.9-0.3.beta.20091007git.el6 > centos6-x86_64-0 89 k > > Transaction Summary > ============================================================================================================================================================================= > Install 19 Package(s) > Upgrade 0 Package(s) > > Total download size: 4.4 M > Installed size: 13 M > Downloading Packages: > ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > Total > > 60 MB/s | 4.4 MB 00:00 > Running rpm_check_debug > Running Transaction Test > Transaction Test Succeeded > Running Transaction > Installing : file-libs-5.04-5.el6.x86_64 > > 1/19 > Installing : libssh2-1.2.2-7.el6.x86_64 > > 2/19 > Installing : elfutils-libelf-0.148-1.el6.x86_64 > > 3/19 > Installing : xz-libs-4.999.9-0.3.beta.20091007git.el6.x86_64 > > 4/19 > Installing : lua-5.1.4-4.1.el6.x86_64 > > 5/19 > Installing : libcurl-7.19.7-16.el6.x86_64 > > 6/19 > Installing : curl-7.19.7-16.el6.x86_64 > > 7/19 > Installing : iscsi-initiator-utils-6.2.0.872-10.el6.x86_64 > > 8/19 > Installing : vconfig-1.9-8.1.el6.x86_64 > > 9/19 > Installing : bridge-utils-1.2-9.el6.x86_64 > > 10/19 > Installing : logrotate-3.7.8-12.el6.x86_64 > > 11/19 > Installing : ntpdate-4.2.4p8-2.el6.x86_64 > > 12/19 > Installing : db4-utils-4.7.25-16.el6.x86_64 > > 13/19 > Installing : rpm-libs-4.8.0-12.el6.x86_64 > > 14/19 > Installing : rpm-4.8.0-12.el6.x86_64 > > 15/19 > Installing : ntp-4.2.4p8-2.el6.x86_64 > > 16/19 > Installing : rsyslog-4.6.2-2.el6.x86_64 > > 17/19 > Installing : 2:vim-minimal-7.2.411-1.4.el6.x86_64 > > 18/19 > Installing : dracut-network-004-32.el6.noarch > > 19/19 > > Installed: > dracut-network.noarch 0:004-32.el6 ntp.x86_64 0:4.2.4p8-2.el6 > rpm.x86_64 0:4.8.0-12.el6 rsyslog.x86_64 0:4.6.2-2.el6 > vim-minimal.x86_64 2:7.2.411-1.4.el6 > > Dependency Installed: > bridge-utils.x86_64 0:1.2-9.el6 curl.x86_64 0:7.19.7-16.el6 > db4-utils.x86_64 0:4.7.25-16.el6 > elfutils-libelf.x86_64 0:0.148-1.el6 > file-libs.x86_64 0:5.04-5.el6 iscsi-initiator-utils.x86_64 > 0:6.2.0.872-10.el6 libcurl.x86_64 0:7.19.7-16.el6 > libssh2.x86_64 0:1.2.2-7.el6 > logrotate.x86_64 0:3.7.8-12.el6 lua.x86_64 0:5.1.4-4.1.el6 > ntpdate.x86_64 0:4.2.4p8-2.el6 > rpm-libs.x86_64 0:4.8.0-12.el6 > vconfig.x86_64 0:1.9-8.1.el6 xz-libs.x86_64 > 0:4.999.9-0.3.beta.20091007git.el6 > > Complete! > cat: write error: Broken pipe > cat: write error: Broken pipe > cat: write error: Broken pipe > > the initial ramdisk for statelite is generated successfully. > cat: write error: Broken pipe > cat: write error: Broken pipe > cat: write error: Broken pipe > > And when i run genimage on the "kvm" profile: > "couldn't find the kernel file matched 2.6.32-71.29.1.el6.x86_64 in > /install/netboot/centos6/x86_64/kvm/rootimg/boot at ./genimage line > 62." > > FYI, this is what i did: > - copied dracut from "rh" to "centos" > - created some symlinks on centos/: > lrwxrwxrwx 1 root root 27 Jul 28 13:36 compute.pkglist -> > ../rh/compute.rhel6.pkglist > lrwxrwxrwx 1 root root 24 Jul 28 13:35 kvm.pkglist -> > ../rh/kvm.rhels6.pkglist > > Any thoughts? > > Thanks, > Luis > > On Thu, Jul 28, 2011 at 12:12 PM, Luis Miguel Silva > <[email protected]> wrote: > > Hmm, interesting! > > Thanks for the tip! ;o)) > > > > Luis Miguel Silva > > On Jul 28, 2011, at 12:01 PM, "heince.nvg" <[email protected]> wrote: > > > > haha strange, i didn't have that warnings. > > > > - i have no problem installing centos6 kvm because my server support it, > > bridging also no issue > > - centos6 netboot, this is what i do to make it work: > > * copy rhel6 pkglist to centos > > * copy dracut folder on rh folder to centos folder > > * i think the problem because rh6 didn't use busybox-anaconda anymore, so > > you have to feed it using dracut > > * genimage ... > > * packimage ... > > * nodeset [node] netboot > > * boot it > > > > - i haven't tried netboot centos 6 kvm > > > > Regards, > > Heince > > > > On Thu, 2011-07-28 at 11:54 -0600, Luis Miguel Silva wrote: > > > > I have no problem with the warnings! :o) > > Just wanted to report what is happening to check if it is normal or not! ;o) > > > > I now understand it is not critical! > > > > Thanks, > > Luis > > > > On Thu, Jul 28, 2011 at 11:41 AM, Lissa Valletta <[email protected]> wrote: > >> If you want to stop the warning, take each one and for example: > >> mv /opt/xcat/lib/perl/xCAT_plugin/fsp.pm > >> /opt/xcat/lib/perl/xCAT_plugin/fsp.pm.save > >> > >> You don't need them for x-series. > >> > >> Lissa K. Valletta > >> 2-3/T12 > >> Poughkeepsie, NY 12601 > >> (tie 293) 433-3102 > >> > >> > >> > >> > >> > >> From: Luis Miguel Silva <[email protected]> > >> To: xCAT Users Mailing list <[email protected]> > >> Date: 07/28/2011 11:46 AM > >> Subject: Re: [xcat-user] xCAT complains about certain modules > >> (fsp.pm, > >> hmc.pm and ivm.pm) on restart > >> > >> > >> > >> By the way, regarding the modules, i have them too! > >> (and i'm using the same snapshot you are :o)). > >> > >> The problem is that xCAT complains about them at start up ;o). > >> (service xcatd restart) > >> > >> Thanks! > >> Luis > >> > >> On Thu, Jul 28, 2011 at 9:42 AM, Luis Miguel Silva > >> <[email protected]> wrote: > >>> Heince, > >>> > >>> Thanks! > >>> > >>> On an unrelated topic...how well is it working for you? (CentOS 6 + xCAT > >> 2.6)? > >>> > >>> According to my tests, i'm having trouble running: > >>> - installing centos6 kvm -> did not have kvm support! :o( [the kvm > >>> modules were there but were not loaded and it didnt set up a bridge > >>> interface for me) > >>> - netbooting centos6 compute -> failed (genimage for this profile > >>> failed so i could not pack the image) > >>> - netbooting centos6 kvm -> failed (genimage threw some errors but > >>> seemed to complete so i ran "packimage". But now when itry to net boot > >>> from it it complains asking if i ran genimage before running > >>> packimage)... > >>> > >>> Are you, by any chance, provisioning these images in your system? :o) > >>> > >>> Thanks, > >>> Luis > >>> > >>> On Thu, Jul 28, 2011 at 9:32 AM, heince.nvg <[email protected]> wrote: > >>>> Hi Luis :o) > >>>> > >>>> i'm also using CentOS 6, > >>>> i have those modules using xCAT-server-2.6.2-snap201107192304 > >>>> > >>>> Regards, > >>>> Heince > >>>> > >>>> On Thu, 2011-07-28 at 08:39 -0600, Luis Miguel Silva wrote: > >>>>> Thank you! > >>>>> > >>>>> Luis Miguel Silva > >>>>> > >>>>> On Jul 28, 2011, at 2:02 AM, Xiao Peng Wang <[email protected]> wrote: > >>>>> > >>>>> > >>>>> > >>>>> > It's a problem for Centos6 and rh6. But these perl modules are not > >>>>> > needed for x86/x86_64 system. You can ignore it as a message error. > >>>>> > > >>>>> > Thanks > >>>>> > Best Regards > >>>>> > > >> ---------------------------------------------------------------------- > >>>>> > Wang Xiaopeng (王晓朋) > >>>>> > IBM China System Technology Laboratory > >>>>> > Tel: 86-10-82453455 > >>>>> > Email: [email protected] > >>>>> > Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, > >>>>> > Haidian District Beijing P.R.China 100193 > >>>>> > > >>>>> > <graycol.gif>Luis Miguel Silva ---2011-07-28 03:34:59---Lisa, This > >>>>> > is what i have: > >>>>> > > >>>>> > From: Luis Miguel Silva <[email protected]> > >>>>> > To: xCAT Users Mailing list <[email protected]> > >>>>> > Date: 2011-07-28 03:34 > >>>>> > Subject: Re: [xcat-user] xCAT complains about certain modules > >>>>> > (fsp.pm, hmc.pm and ivm.pm) on restart > >>>>> > > >>>>> > > >>>>> > > >>>>> > ____________________________________________________________________ > >>>>> > > >>>>> > > >>>>> > > >>>>> > Lisa, > >>>>> > > >>>>> > This is what i have: > >>>>> > [root@xcat ~]# nodels -v > >>>>> > Version 2.6.2 (svn r10120, built Tue Jul 19 23:03:39 EDT 2011) > >>>>> > [root@xcat ~]# > >>>>> > > >>>>> > [root@xcat ~]# cat /etc/yum.repos.d/xCAT-* > >>>>> > [xcat-2-core] > >>>>> > name=xCAT 2 Core packages > >>>>> > baseurl=http://xcat.sourceforge.net/yum/2.6/xcat-core > >>>>> > enabled=1 > >>>>> > gpgcheck=1 > >>>>> > > >> > >> gpgkey=http://xcat.sourceforge.net/yum/2.6/xcat-core/repodata/repomd.xml.key > >> > >>>>> > [xcat-dep] > >>>>> > name=xCAT 2 depedencies > >>>>> > baseurl=http://xcat.sourceforge.net/yum/xcat-dep/rh5/x86_64 > >>>>> > enabled=1 > >>>>> > gpgcheck=1 > >>>>> > > >> > >> gpgkey=http://xcat.sourceforge.net/yum/xcat-dep/rh5/x86_64/repodata/repomd.xml.key > >> > >>>>> > [root@xcat ~]# > >>>>> > > >>>>> > > >>>>> > Thanks, > >>>>> > Luis > >>>>> > > >>>>> > On Wed, Jul 27, 2011 at 1:23 PM, Lissa Valletta <[email protected]> > >>>>> > wrote: > >>>>> > > Could you run nodels -v? Also did you put on the lastest deps > >>>>> > package? > >>>>> > > But also we have not tested anything on Centos 6. Check our home > >>>>> > page. > >>>>> > > Centos 5 is the last supported level. > >>>>> > > > >>>>> > > > >>>>> > > Lissa K. Valletta > >>>>> > > 2-3/T12 > >>>>> > > Poughkeepsie, NY 12601 > >>>>> > > (tie 293) 433-3102 > >>>>> > > > >>>>> > > > >>>>> > > > >>>>> > > > >>>>> > > > >>>>> > > From: Luis Miguel Silva <[email protected]> > >>>>> > > To: xCAT Users Mailing list <[email protected]> > >>>>> > > Date: 07/27/2011 12:24 PM > >>>>> > > Subject: [xcat-user] xCAT complains about certain modules > >>>>> > (fsp.pm, > >>>>> > > hmc.pm and ivm.pm) on restart > >>>>> > > > >>>>> > > > >>>>> > > > >>>>> > > Dear all, > >>>>> > > > >>>>> > > I just reinstalled one of my xCAT systems with CentOS 6 and xCAT > >>>>> > 2.6.x > >>>>> > > (from the daily snapshots repo) and i'm getting this error: > >>>>> > > [root@l01 backups]# /etc/init.d/xcatd restart > >>>>> > > Restarting xCATd Error loading module > >>>>> > > /opt/xcat/lib/perl/xCAT_plugin/bpa.pm ...skipping > >>>>> > > Error loading module /opt/xcat/lib/perl/xCAT_plugin/fsp.pm > >>>>> > ...skipping > >>>>> > > Error loading module /opt/xcat/lib/perl/xCAT_plugin/hmc.pm > >>>>> > ...skipping > >>>>> > > Error loading module /opt/xcat/lib/perl/xCAT_plugin/ivm.pm > >>>>> > ...skipping > >>>>> > > > >>>>> > > Shutting down vsftpd: [ OK > >>>>> > ] > >>>>> > > Starting vsftpd for vsftpd: [ OK > >>>>> > ] > >>>>> > > [ OK ] > >>>>> > > [root@l01 backups]# > >>>>> > > > >>>>> > > Any thoughts? > >>>>> > > > >>>>> > > Thanks, > >>>>> > > Luis > >>>>> > > > >>>>> > > > >>>>> > > >> > >> ------------------------------------------------------------------------------ > >> > >>>>> > > > >>>>> > > Got Input? Slashdot Needs You. > >>>>> > > Take our quick survey online. Come on, we don't ask for help > >>>>> > often. > >>>>> > > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >>>>> > > http://p.sf.net/sfu/slashdot-survey > >>>>> > > _______________________________________________ > >>>>> > > xCAT-user mailing list > >>>>> > > [email protected] > >>>>> > > https://lists.sourceforge.net/lists/listinfo/xcat-user > >>>>> > > > >>>>> > > > >>>>> > > > >>>>> > > > >>>>> > > >> > >> ------------------------------------------------------------------------------ > >> > >>>>> > > Got Input? Slashdot Needs You. > >>>>> > > Take our quick survey online. Come on, we don't ask for help > >>>>> > often. > >>>>> > > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >>>>> > > http://p.sf.net/sfu/slashdot-survey > >>>>> > > _______________________________________________ > >>>>> > > xCAT-user mailing list > >>>>> > > [email protected] > >>>>> > > https://lists.sourceforge.net/lists/listinfo/xcat-user > >>>>> > > > >>>>> > > >>>>> > > >> > >> ------------------------------------------------------------------------------ > >> > >>>>> > Got Input? Slashdot Needs You. > >>>>> > Take our quick survey online. Come on, we don't ask for help often. > >>>>> > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >>>>> > http://p.sf.net/sfu/slashdot-survey > >>>>> > _______________________________________________ > >>>>> > xCAT-user mailing list > >>>>> > [email protected] > >>>>> > https://lists.sourceforge.net/lists/listinfo/xcat-user > >>>>> > > >>>>> > > >>>>> > > >> > >> ------------------------------------------------------------------------------ > >> > >>>>> > Got Input? Slashdot Needs You. > >>>>> > Take our quick survey online. Come on, we don't ask for help often. > >>>>> > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >>>>> > http://p.sf.net/sfu/slashdot-survey > >>>>> > _______________________________________________ > >>>>> > xCAT-user mailing list > >>>>> > [email protected] > >>>>> > https://lists.sourceforge.net/lists/listinfo/xcat-user > >>>>> > > >>>>> > >> > >> ------------------------------------------------------------------------------ > >> > >>>>> Got Input? Slashdot Needs You. > >>>>> Take our quick survey online. Come on, we don't ask for help often. > >>>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >>>>> http://p.sf.net/sfu/slashdot-survey > >>>>> _______________________________________________ xCAT-user mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/xcat-user > >>>> > >>>> > >>>> > >>>> > >> > >> ------------------------------------------------------------------------------ > >> > >>>> Got Input? Slashdot Needs You. > >>>> Take our quick survey online. Come on, we don't ask for help often. > >>>> Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >>>> http://p.sf.net/sfu/slashdot-survey > >>>> _______________________________________________ > >>>> xCAT-user mailing list > >>>> [email protected] > >>>> https://lists.sourceforge.net/lists/listinfo/xcat-user > >>>> > >>> > >> > >> > >> ------------------------------------------------------------------------------ > >> > >> Got Input? Slashdot Needs You. > >> Take our quick survey online. Come on, we don't ask for help often. > >> Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >> http://p.sf.net/sfu/slashdot-survey > >> _______________________________________________ > >> xCAT-user mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/xcat-user > >> > >> ------------------------------------------------------------------------------ > >> Got Input? Slashdot Needs You. > >> Take our quick survey online. Come on, we don't ask for help often. > >> Plus, you'll get a chance to win $100 to spend on ThinkGeek. > >> http://p.sf.net/sfu/slashdot-survey > >> _______________________________________________ > >> xCAT-user mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/xcat-user > >> > > > > ------------------------------------------------------------------------------ > > Got Input? Slashdot Needs You. > > Take our quick survey online. Come on, we don't ask for help often. > > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > > http://p.sf.net/sfu/slashdot-survey > > _______________________________________________ > > xCAT-user mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > > ------------------------------------------------------------------------------ > > Got Input? Slashdot Needs You. > > Take our quick survey online. Come on, we don't ask for help often. > > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > > http://p.sf.net/sfu/slashdot-survey > > > > _______________________________________________ > > xCAT-user mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > > ------------------------------------------------------------------------------ > Got Input? Slashdot Needs You. > Take our quick survey online. Come on, we don't ask for help often. > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > http://p.sf.net/sfu/slashdot-survey > _______________________________________________ > xCAT-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ Got Input? Slashdot Needs You. Take our quick survey online. Come on, we don't ask for help often. Plus, you'll get a chance to win $100 to spend on ThinkGeek. http://p.sf.net/sfu/slashdot-survey _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
