Hi,
I want to connect our club Flarms via Bluetooth device
<http://www.sena.com/products/industrial_bluetooth/esd.php> ESD200 to an
Android (2.3.3) Samsung Galaxy GT S5830. Pairing of both devices is working
but nothing happens at XCsoar 6.22. I tried different driver settings at
Config. Page 15 generic/nmea and all the other drivers, with poor results.
Config/Config/Config/Nmea always tells: not connected.
Baudrates from 4800 to 19200 8n1 gave same results: At all speeds arriving
Data can be seen on the Android with Bterm Terminal App.
But no Flarm-Radar and no Flarm-Traffic display appears at XCsoar. Only
Restart of ser. Interfaces and GPS not connected every minute, or so.
Is there a reliable method to test the Bluetooth connection to XCsoar
without the need going to the airfield and use an original Flarm?
Any help or comments are highly welcome.
Thanks
Andreas
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
Xcsoar-user mailing list
Xcsoar-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcsoar-user
