Hi Olaf, i am not sure, maybe there were some strange signs in the text, will check it again. The Bt Modul is plugged to the Extension connector and configured to 4800 baud (has no auto-setting). According to Flarm installation Manual (Ch. 9) Extension port is only supplied at 4800, or not? Does Flarm-Radar Display pop up automatically when XCs recognizes a Flarm (glider in Hangar) or must Flarm have sight to satellites or even other flarm equipped planes?
Andreas -----Ursprüngliche Nachricht----- Von: Olaf Hartmann [mailto:olaf.hartm...@s1998.tu-chemnitz.de] Gesendet: Montag, 14. November 2011 12:01 An: Andreas Lüttgering Cc: xcsoar-user@lists.sourceforge.net Betreff: Re: [Xcsoar-user] No Bluetooth Connection to Flarm Quoting Andreas Lüttgering <andreas.luettger...@pkcomp.de>: > Baudrates from 4800 to 19200 8n1 gave same results: At all speeds > arriving Data can be seen on the Android with Bterm Terminal App. Does the data look like Ascii text? Otherwise the baudrates of the FLARM and your bluetooth adapters do not match. You can have a look at the FLARM documenation to see what to expect: http://www.flarm.com/support/manual/FLARM_DataportManual_v5.00E.pdf Olaf ---------------------------------------------------------------------------- -- RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Xcsoar-user mailing list Xcsoar-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcsoar-user ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Xcsoar-user mailing list Xcsoar-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcsoar-user
