On Sun, 2006-07-09 at 14:50 +0200, Gilles Chanteperdrix wrote: > Philippe Gerum wrote: > > > I never observe this on my dual PIII whereas I always have the NMI > > > watchdog option enabled. Are you running with or without the tracer ? > > > > > > > w/o. > > enabling xeno nmi watchdog whereas the nucleus module is built-in break > Linux nmi watchdog test. Maybe some setups are not done at Linux level > when this test fails, which could explain some weird behaviour > afterwards. > > Do you have the message: > Testing NMI watchdog... CPU#0: NMI appears to be stuck (x->y)! > > In Linux boot messages ?
Nope. The NMI test looks ok. Linux version 2.6.17-ipipe ([EMAIL PROTECTED]) (gcc version 3.3.3 (Debian 20040321)) #1 SMP Tue Jul 11 03:17:18 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fffd000 (usable) BIOS-e820: 000000003fffd000 - 000000003ffff000 (ACPI data) BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6e80 On node 0 totalpages: 262141 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32765 pages, LIFO batch:7 DMI 2.0 present. Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #1 6:8 APIC version 17 Processor #0 6:8 APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelists Kernel command line: root=/dev/hdc1 ro nmi_watchdog=1 vga=1 console=tty0 console=ttyS0,115200 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 751.749 MHz processor. Using tsc for high-res timesource I-pipe 1.3-07: pipeline enabled. Console: colour VGA+ 80x50 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032916k/1048564k available (2491k kernel code, 15100k reserved, 743k data, 272k init, 131060k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1505.65 BogoMIPS (lpj=7528285) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 28k freed CPU0: Intel Pentium III (Coppermine) stepping 03 Booting processor 1/0 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 1503.45 BogoMIPS (lpj=7517293) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 CPU1: Intel Pentium III (Coppermine) stepping 03 Total of 2 processors activated (3009.11 BogoMIPS). ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=1897 NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xf0730, last bus=1 Setting up standard PCI resources usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI quirk: region e400-e43f claimed by PIIX4 ACPI PCI quirk: region e800-e80f claimed by PIIX4 SMB PIIX4 devres B PIO at 0290-0297 Boot video device is 0000:01:00.0 PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:04.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: e1800000-e2dfffff PREFETCH window: e2f00000-e3ffffff NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2621440 bytes) TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered IA-32 Microcode Update Driver: v1.14 <[EMAIL PROTECTED]> I-pipe: Domain Xenomai registered. Xenomai: hal/x86 started. Xenomai: real-time nucleus v2.2-rc3 (Engines Of Creation) loaded. Xenomai: NMI watchdog started (threshold=100 us). Xenomai: starting native API services. Xenomai: starting POSIX services. Xenomai: starting RTDM services. highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Limiting direct PCI/PCI transfers. Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:04.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... Probing IDE interface ide1... hdc: SAMSUNG SV2044D, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 128KiB hdc: 39862368 sectors (20409 MB) w/472KiB Cache, CHS=39546/16/63, UDMA(33) hdc: cache flushes not supported hdc: hdc1 hdc2 usbmon: debugfs is not available serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Testing NMI watchdog ... <6>input: AT Raw Set 2 keyboard as /class/input/input0 OK. Starting balanced_irq Using IPI Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 272k freed EXT3 FS on hdc1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hdc2, internal journal EXT3-fs: mounted filesystem with ordered data mode. 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:09.0: 3Com PCI 3c980C Python-T at f880e000. 0000:00:0a.0: 3Com PCI 3c980C Python-T at f8810000. eth0: setting half-duplex. netconsole: local port 6665 netconsole: interface eth0 netconsole: remote port 6666 netconsole: remote IP 192.168.0.8 netconsole: remote ethernet address 00:11:2f:0c:f1:ca netconsole: local IP 192.168.0.7 netconsole: network logging started -- Philippe. _______________________________________________ Xenomai-core mailing list Xenomai-core@gna.org https://mail.gna.org/listinfo/xenomai-core