Benjamin Zores wrote:
On Mon, 27 Nov 2006 13:11:23 +0100
Wolfgang Grandegger <[EMAIL PROTECTED]> wrote:

Benjamin Zores wrote:
On Mon, 27 Nov 2006 12:21:25 +0100
Wolfgang Grandegger <[EMAIL PROTECTED]> wrote:

Well, I hack a bit my patch to make it compile and the kernel already booted.
Though it hangs when loading the SATA driver.
I have no idea why atm.
Problems with IRQs?
Probably, as when unplugging the SATA drive, the boot goes further
but then hang at USB detection (both are handlign IRQs a lot i guess).
Would be interesting if someone could test on other board than just mine.
As I pointed out in my previous mail, the IRQ handling is not yet correct for powerpc. Try to correct his first.

The 2.6.19 having been released out, and working much better on my card
than the vanilla 2.6.18 used to be, I'm now more kind to adapt my patch to
this latest kernel.


However the IRQ handling API seem to have changed a lot
and i was wondering if some work on porting Adeos
(x86/ppc, not yet powerpc of course) patches already have been started
by someone here ?

I have now a preliminary patch for adeos-ipipe-2.6.19-ppc-1.5-00. The porting was rather straight-forward, as the ppc tree does not use the new "genirq" interface, in contrast to the powerpc tree (that's what you have realized as well).

(i.e. something i can work from to adapt my new patch)

Therefore the port of the powerpc tree should be based on Philippe's new adeos-ipipe-2.6.19-i386-1.6-00. Unfortunately, I still do not have a board by hand supported by the powerpc tree.


Xenomai-core mailing list

Reply via email to