roland Tollenaar wrote: > Hi > > On 3/6/07, Sebastian Smolorz <[EMAIL PROTECTED]> wrote: > > roland Tollenaar wrote: > > > > Could you do the following: Fire up rtcanrecv and send out the setup > > > > message to the node with rtcansend. Don't start your application > > > > during the whole time and watch what happens. > > > > > > > :( Its not one message, its about 6 can rtcanrecv run scripts? > > Ok done with rtcansend and rtcanrecv. Perfect behavior i.e exactly the > same behaviour as I get when i run my applicaiton. Obviously there is > no indication as to the real-time disruptiveness because I can only > see that from my application. Which is not running.
So let me summarise: - With rtcansend/rtcanrecv and without your application the communication with the node is perfect (overflows?) - With your application running you state that the real-time behaviour of the system is bad. How do you detect this? -- Sebastian _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
