A Dilluns 29 Octubre 2007, Alexis Berlemont va escriure: > Hi, > > > some time ago we wrote about the avalaible of the jr3_pci driver. The > > option to have someone at the end of October. So, how is it? > > A pre-version is available in the svn branch "comedi-rtdm-dev". You will > find in "comedi_drivers/misc_drivers", the driver jr3_pci. > > The source code was ported from the original Comedi project (as the API has > changed). Unfortunately, It is not tested (no hardware available).
Ok, I have download, compiled and installed. I'm using xenomai 2.4-rc4. All have compiled without any problem. Howeber I don't know how to use it. If I try to install the modules: insmod comedi.ko no problem but if I do: insmod ./comedi_drivers/misc_drivers/jr3pci.ko I got insmod: error inserting './comedi_drivers/misc_drivers/jr3pci.ko': -1 Unknown symbol in module where the dmesg says: jr3pci: no version for "comedi_add_drv" found: kernel tainted. jr3pci: Unknown symbol release_firmware jr3pci: Unknown symbol device_unregister jr3pci: Unknown symbol request_firmware jr3pci: Unknown symbol device_register jr3pci: Unknown symbol release_firmware jr3pci: Unknown symbol device_unregister jr3pci: Unknown symbol request_firmware jr3pci: Unknown symbol device_register and now I'm blocked .... > > It could be possible to have it for xenomai-2.4? > > So far, the only way to get the driver sources is through subversion. A > great amount of work (development, test,...) must be achieved before > considering an official release. ok I should help if I want this driver working with xenomai .... Regards, Leo PS use me as betatester of the driver, so if told me any test that I could do. _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
