On 10/07/2011 05:55 PM, Siva kumar Balasubramanian wrote:
> Mini2440 is based on s3c2440,
>
> I did the following steps to patch xenomai for Mini2440
>
> I patched the adeos-ipipe-2.6.37.6-arm-1.18-03.patch to linux
> kernel-2.6.37.6
>
> I used mini2440_defconfig as configuration file, i did not made any changes
>
> After sucessful compilation, i booted the mini2440 compiled kernel
>
> I crosscompiled xenomai-2.5.6 using the following command
>
> ./configure --build=x86_64-pc-linux-gnu --host=arm-linux
> --enable-arm-mach=s3c2410 --enable-arm-tsc
So, no porting involved finally.
You are probably missing --enable-arm-eabi. Note that if you start with
xenomai 2.6.0, the configuration is much easier (basically, you just run
configure with no arguments and it works).
And xenomai 2.6.0's xeno-test should work better.
--
Gilles.
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
