On 10/08/2011 08:28 AM, Siva kumar Balasubramanian wrote:
> After configuring --enable-arm-eabi , now i am getting following message
>
> Xenomai: native skin or CONFIG_XENO_OPT_PERVASIVE disabled.(modprobe xeno
> native?)
>
> i downloaded adeos-ipipe-2.6.37.6-arm-1.18-03.patch separately and patched
> with kernel-2.6.37.6.
> and configured the kernel as mini2440_defconfig, and compiled the kernel
>
> i missed the prepare-kernel.sh step.
>
>
> If i patch the xenomai using the following step , the kernel is not booting
>
> $xenomai_root/scripts/prepare-kernel.sh --arch=arm \
> --adeos=$xenomai_root/ksrc/arch/arm/patches/adeos-ipipe-2.6.37.6-arm-* \
> --linux=$linux_tree
>
> After patching i used mini2440_defconfig. The kernel is not booting
> From the log i find it is hanging in
>
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>
> s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
>
> s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
>
> s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
>
>
> My complete log file is in http://pastebin.com/Z64key6P
What version of xenomai are you using? Only 2.6.0 works with 2.6.37.
--
Gilles.
_______________________________________________
Xenomai-help mailing list
[email protected]
https://mail.gna.org/listinfo/xenomai-help
