I am using xenomai-2.5.6. When i tried with xenomai-2.6.0-rc1 with kernel-2.6.37.6. It gets error during kernel compilation
Which kernel and xenomai version is working in mini2440 I tried vanilla kernel 2.6.35.9 with mini2440_defconfig , i am getting error while booting Log file of error http://pastebin.com/L2mffkym On Sat, Oct 8, 2011 at 9:25 PM, Gilles Chanteperdrix < [email protected]> wrote: > On 10/08/2011 08:28 AM, Siva kumar Balasubramanian wrote: > > After configuring --enable-arm-eabi , now i am getting following message > > > > Xenomai: native skin or CONFIG_XENO_OPT_PERVASIVE disabled.(modprobe xeno > > native?) > > > > i downloaded adeos-ipipe-2.6.37.6-arm-1.18-03.patch separately and > patched > > with kernel-2.6.37.6. > > and configured the kernel as mini2440_defconfig, and compiled the kernel > > > > i missed the prepare-kernel.sh step. > > > > > > If i patch the xenomai using the following step , the kernel is not > booting > > > > $xenomai_root/scripts/prepare-kernel.sh --arch=arm \ > > --adeos=$xenomai_root/ksrc/arch/arm/patches/adeos-ipipe-2.6.37.6-arm-* > \ > > --linux=$linux_tree > > > > After patching i used mini2440_defconfig. The kernel is not booting > > From the log i find it is hanging in > > > > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > > > > s3c2410-ohci s3c2410-ohci: S3C24XX OHCI > > > > s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 > > > > s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 > > > > > > My complete log file is in http://pastebin.com/Z64key6P > > What version of xenomai are you using? Only 2.6.0 works with 2.6.37. > > > -- > Gilles. > -- Regards sivakumar
_______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
