On Fri, 21 Mar 2003, Daniel wrote:
> Melisa,
>
> I get the same problem (missing libglide2x.so) with XFree86 4.2.99.902
> release (essentially 4.3) whilst trying to get my Radion 9000 pro to run
> in X under Linux Mandrake 9.0. How did you solve this?
> -Did you get create the soft link with the libglide3x.so rather than
> libglide2x.so
no, as I was informed the libglide3x.so was used only with 3Dfx cards
(Note: i have no idea why the message appeared -- on reboot it did not
show up again). Do you still get that message? Were you able to make
Xconfig recognize your card? Did you get your driver from ATI (I don't
remember what u said)?
Note: I have read a number of posts on ATI chips...most particularly the
Radeon 9000. Perhaps messaging one of those people who answered queries on
that type card (they tend to know one manufacturer well) would attract
attention? Do you keep these posts? (try [EMAIL PROTECTED] -- I sent
you one of his posts that mentioned Radeon's 9000)
> -Did you have to edit the XF86config to take account of this change (I
> have created mine with XFree86 - configure)
>
My Xconfig would not work until I reduced the refresh rate to 60, the
color bit to 8 and selected VESA...way bad, but was able to at least
increase the resolution to over 800x600!
Since I am not content (I got better results with the XFree86 version that
came with RH7.3 -- I only went to XFree86 ver4.3 as it promised SiS300
support which wasn't happening under the RH7.3 version (I forget which
version that is)), I am gonna try to go to RH8.0 and be content till I can
buy a new card... ;P
>
> I'm beginning to see why Windows XP (which happily coexists with my
> 9000) is so popular!
>
>
Yes, I understand that a bit! I do dual boot with Win2K still as evidently
I too am far away from being ready/able to changeover ;[ !
Sorry I can't help you more...I keep checking all the posts and reading
elsewhere in hopes to find something that might put some light on this
subject. If I read anything (more), or get help from the Xconfig
people (before or after the upgrade), I will try to pass it on.
mgolter
>
>
> Regards
>
>
> Daniel
>
>
>
> >The linux and XFree4 install was so I can run some 3D
> applications...but I
> >did not know that glide was so specifically aimed...the Real problem
> was
> >that I couldn't get the X server configured at all. Right now I am
> >stuck with 16 bit color...(using generic VESA in Xconfigurator, which
> is
> >not as good as what I could get with the XFree86 version that came with
> >RH7.3!
>
> >{I installed the 4.3 version as no other version even lists the SiS300
> >chip...and it looks like 4.3 doesn't really support it either...)
>
> >Thanks for info on the .so (so's I am not a gonna worry (esp since no
> >system complaints!)
>
> ;)
>
> mgolter
>
>
>
> On Fri, 14 Mar 2003, Mike A. Harris wrote:
>
> > On Fri, 14 Mar 2003, Melissa Golter wrote:
> >
> > >Date: Fri, 14 Mar 2003 14:57:34 -0600 (CST)
> > >From: Melissa Golter <[EMAIL PROTECTED]>
> > >To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
> > >Cc: [EMAIL PROTECTED]
> > >Reply-To: [EMAIL PROTECTED]
> > >Content-Type: TEXT/PLAIN; charset=US-ASCII
> > >Subject: RE: Sis300 support in XFree86 version 4.3.0
> > >
> > >If I am reading the filename correctly, that file is 26Mb -- but if
> that
> > >is OK to
> > >send to you, will do...in the meantime, I put it in
> > >ftp.evl.uic.edu/pub/INcoming/mgolter/xfree/
> > >
> > >btw, ver 4.3.0 has libglide3.so but not the 2x.so nec to configure
> the
> > >system correctly. I am supposing I can find the libglide2x.so
> somewhere
> > >(note: the previous version of XFree86 -- the one that came with
> RH7.3,
> > >did not include it either it seems (a *whereis* did not yield a
> result
> > >from the saved XFree version directory either). ;P
> >
> > Just so you don't end up wasting your time....
> >
> > Glide is strictly a 3Dfx low level 3D video driver library which
> > talks directly to 3Dfx Voodoo and Banshee video hardware.
> >
> > Glide 2 is for Voodoo Graphics I/II hardware, and Glide3 is for
> > Voodoo 3/4/5 and Banshee hardware.
> >
> > Glide does not work on any other video hardware, and is totally
> > useless unless you have 3Dfx video hardware, in which case it
> > provides the layer between DRI and the 3Dfx video card for 3D
> > acceleration.
> >
> > In short: You've got an SiS video card, and Glide is meaningless
> > as far as your system is concerned.
> >
> > --
> > Mike A. Harris
> >
> >
> > _______________________________________________
> > XFree86 mailing list
> > [EMAIL PROTECTED]
> > http://XFree86.Org/mailman/listinfo/xfree86
>
>
> Radion 9000 Pro ML9.0 and the m
>
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86