Melissa Golter wrote:
Are you still having problems with the SiS300 in XFree 4.3? If so, what
sort of problems?

Thomas


Hope this is clear enough...

a. yes, the SiS300 card is not being recognized by RH7.3, nor RH7.3 with
XFree86 version 4.3.0, on my system. Right now, Xconfig will only allow a
screen to show if the refresh rate is reduced to 60, color bit depth to 8,
and VESA selected.

No idea about RH.


b. I have attached the XFree86.0.log (there is also a copy at
ftp.evl.uic.edu/pub/INcoming/mgolter/xfree/.  There was, as Cynthia
Grossen noted, a [drm] drmAgpAcquire failed error (as well a
*libglide2x.so missing* message which (apparently) has to do with 3DFX
cards, so I have ignored the .so message -- that message has not
re-appeared). Let me know if any other info is necessary to help amend the
situation?

1) Your not telling us *what*the*problem*is. Nice log, but from that I can't see what is going on on the screen.


2) Generally: The SiS300 and especially the SiS301 are more or less obsolete products. I have never seen a SiS300 card with a SiS301 for secondary VGA output, hence I could never test this.

From the log I see that your monitor is connected to the secondary output. Try the other one.

3) > (==) SIS(0): Depth 8, (==) framebuffer bpp 8

The color depth is 8. Is that intended?

c. Some day I would like to try to run some 3d graphics applications
(Performer, YG, CavernSoft) on this system. From the (your) Thomas
Winischhofer webpages I see SiS is one company that does not share
development info and perhaps this card is not a likely candidate for such
efforts?

It most certainly is not. The card is from around 1998...


(Note: until I saw the support for the SiS300 card listed under 4.3 I had
intended on picking up the SiS300 (your) *fix* on those (your) pages. Then I thought mebbe it had been included in 4.3?

They are.


(WW) SIS(0): Monitor0: Using default hsync range of 28.00-33.00kHz
(WW) SIS(0): Monitor0: using default vrefresh range of 43.00-72.00Hz

That's very narrow. Sure that your monitor does not go beyond that?


Thomas

--
Thomas Winischhofer
Vienna/Austria
mailto:[EMAIL PROTECTED]            http://www.winischhofer.net/



_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Reply via email to