> Are you still having problems with the SiS300 in XFree 4.3? If so, what
> sort of problems?
>
> Thomas
Hope this is clear enough...
a. yes, the SiS300 card is not being recognized by RH7.3, nor RH7.3 with
XFree86 version 4.3.0, on my system. Right now, Xconfig will only allow a
screen to show if the refresh rate is reduced to 60, color bit depth to 8,
and VESA selected.
b. I have attached the XFree86.0.log (there is also a copy at
ftp.evl.uic.edu/pub/INcoming/mgolter/xfree/. There was, as Cynthia
Grossen noted, a [drm] drmAgpAcquire failed error (as well a
*libglide2x.so missing* message which (apparently) has to do with 3DFX
cards, so I have ignored the .so message -- that message has not
re-appeared). Let me know if any other info is necessary to help amend the
situation?
I have also attached a copy of a recent posting which seems pertinent as I
am considering installing RH8.0 to see if the situation improves (see
c. below)
c. Some day I would like to try to run some 3d graphics applications
(Performer, YG, CavernSoft) on this system. From the (your) Thomas
Winischhofer webpages I see SiS is one company that does not share
development info and perhaps this card is not a likely candidate for such
efforts?
(Note: until I saw the support for the SiS300 card listed under 4.3 I had
intended on picking up the SiS300 (your) *fix* on those (your) pages.
Then I thought mebbe it had been included in 4.3? However, being rather
new (!) to all this, and in light of the degrading situation, I now don't
feel confident about grabbing the *fix*. And remember tho notes were given
re support, that drm support was not included per se.)
Upshot: if running 3D Is within the realm of possibility while using the
SiS300, any help to try to get a working 3D display would be appreciated.
(Note: by 3D here, I am Not referring to active stereo, but the facsimile)
Let me know what (other) info might be necessary.
Thanks for your attention,
mgolter
On Sat, 22 Mar 2003, Thomas Winischhofer wrote:
> Are you still having problems with the SiS300 in XFree 4.3? If so, what
> sort of problems?
>
> Thomas
>
>
> Melissa Golter wrote:
> > On Fri, 21 Mar 2003, Daniel wrote:
> >
> >
> >>Melisa,
> >>
> >>I get the same problem (missing libglide2x.so) with XFree86 4.2.99.902
> >>release (essentially 4.3) whilst trying to get my Radion 9000 pro to run
> >>in X under Linux Mandrake 9.0. How did you solve this?
> >>-Did you get create the soft link with the libglide3x.so rather than
> >>libglide2x.so
> >
> >
> > no, as I was informed the libglide3x.so was used only with 3Dfx cards
> > (Note: i have no idea why the message appeared -- on reboot it did not
> > show up again). Do you still get that message? Were you able to make
> > Xconfig recognize your card? Did you get your driver from ATI (I don't
> > remember what u said)?
> >
> > Note: I have read a number of posts on ATI chips...most particularly the
> > Radeon 9000. Perhaps messaging one of those people who answered queries on
> > that type card (they tend to know one manufacturer well) would attract
> > attention? Do you keep these posts? (try [EMAIL PROTECTED] -- I sent
> > you one of his posts that mentioned Radeon's 9000)
> >
> >
> >>-Did you have to edit the XF86config to take account of this change (I
> >>have created mine with XFree86 - configure)
> >>
> >
> > My Xconfig would not work until I reduced the refresh rate to 60, the
> > color bit to 8 and selected VESA...way bad, but was able to at least
> > increase the resolution to over 800x600!
> >
> > Since I am not content (I got better results with the XFree86 version that
> > came with RH7.3 -- I only went to XFree86 ver4.3 as it promised SiS300
> > support which wasn't happening under the RH7.3 version (I forget which
> > version that is)), I am gonna try to go to RH8.0 and be content till I can
> > buy a new card... ;P
> >
> >
> >>
> >>I'm beginning to see why Windows XP (which happily coexists with my
> >>9000) is so popular!
> >>
> >>
> >
> >
> > Yes, I understand that a bit! I do dual boot with Win2K still as evidently
> > I too am far away from being ready/able to changeover ;[ !
> >
> > Sorry I can't help you more...I keep checking all the posts and reading
> > elsewhere in hopes to find something that might put some light on this
> > subject. If I read anything (more), or get help from the Xconfig
> > people (before or after the upgrade), I will try to pass it on.
> >
> >
> > mgolter
> >
> >>
> >>
> >>Regards
> >>
> >>
> >>Daniel
> >>
> >>
> >>
> >>
> >>>The linux and XFree4 install was so I can run some 3D
> >>
> >>applications...but I
> >>
> >>>did not know that glide was so specifically aimed...the Real problem
> >>
> >>was
> >>
> >>>that I couldn't get the X server configured at all. Right now I am
> >>>stuck with 16 bit color...(using generic VESA in Xconfigurator, which
> >>
> >>is
> >>
> >>>not as good as what I could get with the XFree86 version that came with
> >>>RH7.3!
> >>
> >>
> >>
> >>>{I installed the 4.3 version as no other version even lists the SiS300
> >>>chip...and it looks like 4.3 doesn't really support it either...)
> >>
> >>
> >>
> >>>Thanks for info on the .so (so's I am not a gonna worry (esp since no
> >>>system complaints!)
> >>
> >>
> >>;)
> >>
> >>mgolter
> >>
> >>
> >>
> >>On Fri, 14 Mar 2003, Mike A. Harris wrote:
> >>
> >>
> >>>On Fri, 14 Mar 2003, Melissa Golter wrote:
> >>>
> >>>
> >>>>Date: Fri, 14 Mar 2003 14:57:34 -0600 (CST)
> >>>>From: Melissa Golter <[EMAIL PROTECTED]>
> >>>>To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
> >>>>Cc: [EMAIL PROTECTED]
> >>>>Reply-To: [EMAIL PROTECTED]
> >>>>Content-Type: TEXT/PLAIN; charset=US-ASCII
> >>>>Subject: RE: Sis300 support in XFree86 version 4.3.0
> >>>>
> >>>>If I am reading the filename correctly, that file is 26Mb -- but if
> >>>
> >>that
> >>
> >>>>is OK to
> >>>>send to you, will do...in the meantime, I put it in
> >>>>ftp.evl.uic.edu/pub/INcoming/mgolter/xfree/
> >>>>
> >>>>btw, ver 4.3.0 has libglide3.so but not the 2x.so nec to configure
> >>>
> >>the
> >>
> >>>>system correctly. I am supposing I can find the libglide2x.so
> >>>
> >>somewhere
> >>
> >>>>(note: the previous version of XFree86 -- the one that came with
> >>>
> >>RH7.3,
> >>
> >>>>did not include it either it seems (a *whereis* did not yield a
> >>>
> >>result
> >>
> >>>>from the saved XFree version directory either). ;P
> >>>
> >>>Just so you don't end up wasting your time....
> >>>
> >>>Glide is strictly a 3Dfx low level 3D video driver library which
> >>>talks directly to 3Dfx Voodoo and Banshee video hardware.
> >>>
> >>>Glide 2 is for Voodoo Graphics I/II hardware, and Glide3 is for
> >>>Voodoo 3/4/5 and Banshee hardware.
> >>>
> >>>Glide does not work on any other video hardware, and is totally
> >>>useless unless you have 3Dfx video hardware, in which case it
> >>>provides the layer between DRI and the 3Dfx video card for 3D
> >>>acceleration.
> >>>
> >>>In short: You've got an SiS video card, and Glide is meaningless
> >>>as far as your system is concerned.
> >>>
> >>>--
> >>>Mike A. Harris
> >>>
> >>>
> >>>_______________________________________________
> >>>XFree86 mailing list
> >>>[EMAIL PROTECTED]
> >>>http://XFree86.Org/mailman/listinfo/xfree86
> >>
> >>
> >>
> >>Radion 9000 Pro ML9.0 and the m
> >>
> >
> >
> >
> >
> >
> > _______________________________________________
> > XFree86 mailing list
> > [EMAIL PROTECTED]
> > http://XFree86.Org/mailman/listinfo/xfree86
> >
>
>
> --
> Thomas Winischhofer
> Vienna/Austria
> mailto:[EMAIL PROTECTED] *** http://www.winischhofer.net
>
> _______________________________________________
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86
>
From [EMAIL PROTECTED] Sat Mar 22 09:26:19 2003
Date: 21 Mar 2003 22:37:36 -0800
From: Paul <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [XFree86] Struggling with multihead on ATI's 9000 Pro
I have tried a few things to get my multihead going in my Red Hat 8.0
installation. XFree86 is version 4.2.0. Anaconda gave me just the
"vesa" driver and a cloned display. I've tried a few basic things that
do not work. I've tried the XFree86 -configure and got some error
warnings about a .h file with a missing entry. I tried the ATI drivers
over at ATI's site and using the Check.sh script, I am getting the
cryptic message:
"No Linux/ix86 binaries for this libc version"
I might try installing this RPM package if I had slightest idea that
that this message was saying it was OK to do so.
I also include here my latest XF86Config file:
# XFree86 4 configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
#Added by me ...
Section "ServerFlags"
Option "Xinerama" "true"
Option "CloneDisplay" "false"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Shamrock"
HorizSync 30.0 - 64.0
VertRefresh 47.0 - 104.0
ModeLine "1400x1050" 129.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync
+vsync
ModeLine "1400x1050" 151.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync
+vsync
ModeLine "1400x1050" 162.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync
+vsync
ModeLine "1400x1050" 184.0 1400 1464 1656 1960 1050 1051 1054 1100 +hsync
+vsync
Option "dpms"
EndSection
Section "Monitor"
Identifier "Monitor1"
ModelName "Samsung SyncMaster 3Ne"
HorizSync 31.5, 35.2, 35.5, 38, 48
VertRefresh 50.0 - 87
EndSection
Section "Device"
# === disable PnP Monitor ===
# Option "NoDDC"
# === disable/enable XAA/DRI ===
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
# vendor=1002, device=496e
Identifier "ATI Graphics Adapter jack 0"
Driver "radeon"
BoardName "ATI Radeon 9000"
# VideoRam 131072
# BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
# === disable PnP Monitor ===
# Option "NoDDC"
# === disable/enable XAA/DRI ===
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
# vendor=1002, device=496e
Identifier "ATI Graphics Adapter jack 1"
Driver "radeon"
BoardName "ATI Radeon 9000"
# VideoRam 131072
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
# Option "backingstore"
Identifier "Screen0"
Device "ATI Graphics Adapter jack 0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
# initial origin if mode is smaller than desktop
# Virtual 1280 1024
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
Section "Screen"
#Option "backingstore"
Identifier "Screen1"
Device "ATI Graphics Adapter jack 1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
# initial origin if mode is smaller than desktop
# Virtual 1280 1024
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
Section "DRI"
# The next line was commented out by me ...
# Group 0
Mode 0666
EndSection
#End of XF86Config file
Parts of this were copied from some posts here at the mailing list and
edited for my monitors. This config file gives the following error
messages:
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-11smp i686 [ELF]
Build Host: daffy.perf.redhat.com
Module Loader present
OS Kernel: Linux version 2.4.18-27.8.0 ([EMAIL PROTECTED]) (gcc version 3.2 20020903
(Red Hat Linux 8.0 3.2-7)) #1 Fri Mar 14 06:45:49 EST 2003
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Mar 21 22:33:44 2003
(++) Using config file: "/etc/X11/XF86ConfigCopy"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Graphics Adapter jack 0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "ATI Graphics Adapter jack 1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "DevInputMice"
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "Xinerama" "true"
(**) Xinerama: enabled
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0646 card 1043,8081 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0961 card 0000,0000 rev 10 class 06,01,00 hdr 80
(II) PCI: 00:02:2: chip 1039,7001 card 1043,807a rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:02:3: chip 1039,7001 card 1043,807a rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:02:5: chip 1039,5513 card 1043,807a rev d0 class 01,01,80 hdr 80
(II) PCI: 00:03:0: chip 1039,0900 card 1043,807c rev 90 class 02,00,00 hdr 00
(II) PCI: 00:05:0: chip 13f6,0111 card 1043,80e2 rev 10 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4966 card 1002,0002 rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,496e card 1002,0003 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xe7000000 - 0xe7ffffff (0x1000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xf0000000 - 0xfebfffff (0xec00000) MX[B]
(II) Bus -1: bridge is at (0:2:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) ATI unknown chipset (0x4966) rev 1, Mem @ 0xf8000000/26,
0xe7800000/16, I/O @ 0xd800/8, BIOS @ 0xf7fe0000/17
(--) PCI: (1:0:1) ATI unknown chipset (0x496e) rev 1, Mem @ 0xf0000000/26,
0xe7000000/16
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[1] -1 0xe6000000 - 0xe6000fff (0x1000) MX[B]
[2] -1 0xe6800000 - 0xe6800fff (0x1000) MX[B]
[3] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[4] -1 0xf7fe0000 - 0xf7ffffff (0x20000) MX[B](B)
[5] -1 0xe7800000 - 0xe780ffff (0x10000) MX[B](B)
[6] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[7] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[8] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
[9] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0xe7000000 - 0xe700ffff (0x10000) MX[B](B)
[1] -1 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[2] -1 0x00009800 - 0x000098ff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[1] -1 0xe6000000 - 0xe6000fff (0x1000) MX[B]
[2] -1 0xe6800000 - 0xe6800fff (0x1000) MX[B]
[3] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[4] -1 0xf7fe0000 - 0xf7ffffff (0x20000) MX[B](B)
[5] -1 0xe7800000 - 0xe780ffff (0x10000) MX[B](B)
[6] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[7] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[8] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
[9] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0xe7000000 - 0xe700ffff (0x10000) MX[B](B)
[1] -1 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[2] -1 0x00009800 - 0x000098ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe5800000 - 0xe5800fff (0x1000) MX[B]
[6] -1 0xe6000000 - 0xe6000fff (0x1000) MX[B]
[7] -1 0xe6800000 - 0xe6800fff (0x1000) MX[B]
[8] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[9] -1 0xf7fe0000 - 0xf7ffffff (0x20000) MX[B](B)
[10] -1 0xe7800000 - 0xe780ffff (0x10000) MX[B](B)
[11] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[12] -1 0xe7000000 - 0xe700ffff (0x10000) MX[B](B)
[13] -1 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[17] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
[18] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[19] -1 0x00009800 - 0x000098ff (0x100) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 6.4.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) ATI: ATI driver (version 6.4.8) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LX (AGP),
ATI Radeon Mobility LY (AGP), ATI Radeon Mobility LZ (AGP),
ATI Radeon 8500 QL (AGP), ATI Radeon 8500 QN (AGP),
ATI Radeon 8500 QO (AGP), ATI Radeon 8500 Ql (AGP),
ATI Radeon 8500 BB (AGP), ATI Radeon 7500 QW (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Assigning device section with no busID to primary device
(EE) No devices detected.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]
End of Log
Anybody have any idea what I should do to get multihead going on my
system? I think I may have ran the installation of this Red Hat 8.0
with the Plug and Play OS setting in my motherboard's BIOS set to
"disable". Could this be the source of my problems? I am having
trouble getting my onboard sound going and I wonder it is for the same
reason.
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20 i686 [ELF]
Build Date: 07 March 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Mar 14 10:53:55 2003
(++) Using config file: "/root/XF86Config.new"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,71a0 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,71a1 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 9004,8078 card 9004,7880 rev 01 class 01,00,00 hdr 00
(II) PCI: 00:13:0: chip 1011,0024 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 01:00:0: chip 1039,0300 card 1039,0300 rev 40 class 03,00,00 hdr 00
(II) PCI: 02:04:0: chip 1000,000f card 1000,1000 rev 26 class 01,00,00 hdr 00
(II) PCI: 02:05:0: chip 1022,2000 card 103c,106e rev 33 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfeb00000 - 0xfebfffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:19:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00007000 - 0x000070ff (0x100) IX[B]
[1] -1 0 0x00007400 - 0x000074ff (0x100) IX[B]
[2] -1 0 0x00007800 - 0x000078ff (0x100) IX[B]
[3] -1 0 0x00007c00 - 0x00007cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfbf00000 - 0xfbffffff (0x100000) MX[B]
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] SiS300/305 PCI/AGP VGA Display
Adapter rev 64, Mem @ 0xe8000000/27, 0xfebc0000/17, I/O @ 0xec00/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf4000000 from 0xf7ffffff to 0xf3ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfbfff400 - 0xfbfff41f (0x20) MX[B]
[1] -1 0 0xfbffe000 - 0xfbffefff (0x1000) MX[B]
[2] -1 0 0xfbfff800 - 0xfbfff8ff (0x100) MX[B]
[3] -1 0 0xfedff000 - 0xfedfffff (0x1000) MX[B]
[4] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O
[5] -1 0 0xfebc0000 - 0xfebdffff (0x20000) MX[B](B)
[6] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[7] -1 0 0x00007ce0 - 0x00007cff (0x20) IX[B]
[8] -1 0 0x00007800 - 0x000078ff (0x100) IX[B]
[9] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[10] -1 0 0x0000fce0 - 0x0000fcff (0x20) IX[B]
[11] -1 0 0x0000fcd0 - 0x0000fcdf (0x10) IX[B]
[12] -1 0 0x0000ec00 - 0x0000ec7f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfbfff400 - 0xfbfff41f (0x20) MX[B]
[1] -1 0 0xfbffe000 - 0xfbffefff (0x1000) MX[B]
[2] -1 0 0xfbfff800 - 0xfbfff8ff (0x100) MX[B]
[3] -1 0 0xfedff000 - 0xfedfffff (0x1000) MX[B]
[4] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O
[5] -1 0 0xfebc0000 - 0xfebdffff (0x20000) MX[B](B)
[6] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[7] -1 0 0x00007ce0 - 0x00007cff (0x20) IX[B]
[8] -1 0 0x00007800 - 0x000078ff (0x100) IX[B]
[9] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[10] -1 0 0x0000fce0 - 0x0000fcff (0x20) IX[B]
[11] -1 0 0x0000fcd0 - 0x0000fcdf (0x10) IX[B]
[12] -1 0 0x0000ec00 - 0x0000ec7f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfbfff400 - 0xfbfff41f (0x20) MX[B]
[6] -1 0 0xfbffe000 - 0xfbffefff (0x1000) MX[B]
[7] -1 0 0xfbfff800 - 0xfbfff8ff (0x100) MX[B]
[8] -1 0 0xfedff000 - 0xfedfffff (0x1000) MX[B]
[9] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O
[10] -1 0 0xfebc0000 - 0xfebdffff (0x20000) MX[B](B)
[11] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00007ce0 - 0x00007cff (0x20) IX[B]
[15] -1 0 0x00007800 - 0x000078ff (0x100) IX[B]
[16] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[17] -1 0 0x0000fce0 - 0x0000fcff (0x20) IX[B]
[18] -1 0 0x0000fcd0 - 0x0000fcdf (0x10) IX[B]
[19] -1 0 0x0000ec00 - 0x0000ec7f (0x80) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.6.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO, SIS550, SIS650/M650/651/740, SIS330(Xabre)
(II) Primary Device is: PCI 01:00:0
(--) Chipset SIS300/305 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfbfff400 - 0xfbfff41f (0x20) MX[B]
[6] -1 0 0xfbffe000 - 0xfbffefff (0x1000) MX[B]
[7] -1 0 0xfbfff800 - 0xfbfff8ff (0x100) MX[B]
[8] -1 0 0xfedff000 - 0xfedfffff (0x1000) MX[B]
[9] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O
[10] -1 0 0xfebc0000 - 0xfebdffff (0x20000) MX[B](B)
[11] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00007ce0 - 0x00007cff (0x20) IX[B]
[15] -1 0 0x00007800 - 0x000078ff (0x100) IX[B]
[16] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[17] -1 0 0x0000fce0 - 0x0000fcff (0x20) IX[B]
[18] -1 0 0x0000fcd0 - 0x0000fcdf (0x10) IX[B]
[19] -1 0 0x0000ec00 - 0x0000ec7f (0x80) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfbfff400 - 0xfbfff41f (0x20) MX[B]
[6] -1 0 0xfbffe000 - 0xfbffefff (0x1000) MX[B]
[7] -1 0 0xfbfff800 - 0xfbfff8ff (0x100) MX[B]
[8] -1 0 0xfedff000 - 0xfedfffff (0x1000) MX[B]
[9] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O
[10] -1 0 0xfebc0000 - 0xfebdffff (0x20000) MX[B](B)
[11] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00007ce0 - 0x00007cff (0x20) IX[B]
[18] -1 0 0x00007800 - 0x000078ff (0x100) IX[B]
[19] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[20] -1 0 0x0000fce0 - 0x0000fcff (0x20) IX[B]
[21] -1 0 0x0000fcd0 - 0x0000fcdf (0x10) IX[B]
[22] -1 0 0x0000ec00 - 0x0000ec7f (0x80) IX[B](B)
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) SIS(0): SiS driver (31/01/03-1) by Thomas Winischhofer <[EMAIL PROTECTED]>
(II) SIS(0): See http://www.winischhofer.net/linuxsisvga.shtml for documentation and
updates
(--) SIS(0): This adapter is primary display adapter
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) SIS(0): Relocated IO registers at 0xEC00
(==) SIS(0): Depth 8, (==) framebuffer bpp 8
(==) SIS(0): Default visual is PseudoColor
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SIS(0): Video BIOS version "1.07.50" found at 0xc0000
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is disabled
(==) SIS(0): TurboQueue enabled
(==) SIS(0): Usage of built-in modes is enabled
(--) SIS(0): Video ROM data usage is enabled
(--) SIS(0): Detected DRAM type: SDRAM
(--) SIS(0): Detected memory clock: 125.282 MHz
(--) SIS(0): (Adapter assumes MCLK being 125 Mhz)
(--) SIS(0): Detected DRAM bus width: 128 bit
(--) SIS(0): Linear framebuffer at 0xE8000000
(--) SIS(0): MMIO registers at 0xFEBC0000
(--) SIS(0): VideoRAM: 65536 KB
(II) SIS(0): Using 65020K of framebuffer memory
(--) SIS(0): Hardware supports two video overlays
(--) SIS(0): Detected SiS301 video bridge (Revision 0x0)
(--) SIS(0): SiS30x: Detected secondary VGA connection
(--) SIS(0): No CRT1 connection detected
(--) SIS(0): Memory bandwidth at 8 bpp is 2004.51 MHz
(--) SIS(0): Bandwidth reserved for CRT2 is 1002.26 Mhz
(--) SIS(0): Bandwidth available for CRT1 is 1002.26 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(==) SIS(0): Min pixel clock is 12 MHz
(--) SIS(0): Max pixel clock is 270 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(WW) SIS(0): Monitor0: Using default hsync range of 28.00-33.00kHz
(WW) SIS(0): Monitor0: using default vrefresh range of 43.00-72.00Hz
(II) SIS(0): Clock range: 12.00 to 270.00 MHz
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "720x480" (unknown reason)
(II) SIS(0): Not using default mode "720x576" (unknown reason)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "512x384" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "2048x1536" (unknown reason)
(II) SIS(0): Not using default mode "1280x960" (unknown reason)
(II) SIS(0): Not using default mode "1280x960" (unknown reason)
(II) SIS(0): Not using default mode "1024x600" (unknown reason)
(II) SIS(0): Not using default mode "1152x768" (hsync out of range)
(II) SIS(0): Not using default mode "800x480" (hsync out of range)
(II) SIS(0): Not using default mode "800x480" (hsync out of range)
(II) SIS(0): Not using default mode "800x480" (hsync out of range)
(II) SIS(0): Not using default mode "1024x576" (hsync out of range)
(II) SIS(0): Not using default mode "1024x576" (hsync out of range)
(II) SIS(0): Not using default mode "1024x576" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1152x864" (hsync out of range)
(II) SIS(0): Not using default mode "1152x864" (hsync out of range)
(II) SIS(0): Not using default mode "848x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "856x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1360x768" (unknown reason)
(--) SIS(0): Virtual size is 856x480 (pitch 856)
(**) SIS(0): *Default mode "856x480": 33.9 MHz, 31.7 kHz, 59.8 Hz
(II) SIS(0): Modeline "856x480" 33.94 856 872 1000 1072 480 492 495 529 -hsync
-vsync
(**) SIS(0): *Default mode "848x480": 33.7 MHz, 31.0 kHz, 60.0 Hz
(II) SIS(0): Modeline "848x480" 33.75 848 864 976 1088 480 486 494 517 -hsync
-vsync
(**) SIS(0): *Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz
(II) SIS(0): Modeline "640x480" 25.06 640 656 752 800 480 490 492 525 -hsync -vsync
(**) SIS(0): *Default mode "640x400": 25.1 MHz, 31.6 kHz, 71.6 Hz
(II) SIS(0): Modeline "640x400" 25.06 640 656 752 792 400 413 415 442 -hsync +vsync
(==) SIS(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) SIS(0): Accel enabled
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfebc0000 - 0xfebdffff (0x20000) MX[B]
[1] 0 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xfbfff400 - 0xfbfff41f (0x20) MX[B]
[8] -1 0 0xfbffe000 - 0xfbffefff (0x1000) MX[B]
[9] -1 0 0xfbfff800 - 0xfbfff8ff (0x100) MX[B]
[10] -1 0 0xfedff000 - 0xfedfffff (0x1000) MX[B]
[11] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O
[12] -1 0 0xfebc0000 - 0xfebdffff (0x20000) MX[B](B)
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[17] 0 0 0x0000ec00 - 0x0000ec7f (0x80) IX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00007ce0 - 0x00007cff (0x20) IX[B]
[21] -1 0 0x00007800 - 0x000078ff (0x100) IX[B]
[22] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[23] -1 0 0x0000fce0 - 0x0000fcff (0x20) IX[B]
[24] -1 0 0x0000fcd0 - 0x0000fcdf (0x10) IX[B]
[25] -1 0 0x0000ec00 - 0x0000ec7f (0x80) IX[B](B)
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xe880
(==) SIS(0): Write-combining range (0xe8000000,0x4000000)
(II) SIS(0): VBFlags=0x20140008
(--) SIS(0): Before: CR30=0x41, CR31=0x06, CR32=0x10, CR33=0x00, CR00=0x00
(II) SIS(0): After: CR30=0x41, CR31=0x46, CR33=0x20
(II) SIS(0): Setting mode 0x3f
(--) SIS(0): (init: VBType=0x0001, VBInfo=0x4441)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) SIS(0): [drm] loaded kernel module for "sis" driver
(II) SIS(0): [drm] created "sis" driver at busid "PCI:1:0:0"
(II) SIS(0): [drm] added 8192 byte SAREA at 0xe09d9000
(II) SIS(0): [drm] mapped SAREA 0xe09d9000 to 0x40024000
(II) SIS(0): [drm] framebuffer handle = 0xe8000000
(II) SIS(0): [drm] added 1 reserved context for kernel
(II) SIS(0): [drm] Registers = 0xfebc0000
(EE) SIS(0): [drm] drmAgpAcquire failed
(II) SIS(0): [drm] failure adding irq 18 handler, stereo disabled
(II) SIS(0): [dri] visual configs initialized.
(II) SIS(0): Frame Buffer From (0,0) To (856,12241)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(II) SIS(0): Using SiS300/310/325 series HW Xv
(II) SIS(0): X context handle = 0x00000001
(II) SIS(0): [drm] installed DRM signal handler
(II) SIS(0): [DRI] installation complete
(II) SIS(0): Direct rendering enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "auto"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ImPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) SIS(0): [drm] removed 1 reserved context for kernel
(II) SIS(0): [drm] unmapping 8192 bytes of SAREA 0xe09d9000 at 0x40024000