I've also noticed the AMDGPU powers up each time I play a video - either using SMplayer or on Chromium
[50458.810260] snd_hda_codec_ca0132 hdaudioC0D0: ca0132 DSP downloaded and running [50459.699224] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000). [50459.797265] [drm] UVD initialized successfully. [50460.008408] [drm] VCE initialized successfully. [50465.175833] amdgpu 0000:01:00.0: GPU pci config reset I used to see this before the drmDevice2 (my memory is a bit fuzzy) stuff landed, so the device wouldn't power up when the device node was probed On 11 April 2018 at 22:53, Mike Lothian <m...@fireburn.co.uk> wrote: > The journal.freeze I mentioned but was too big to attach > > On 11 April 2018 at 22:53, Mike Lothian <m...@fireburn.co.uk> wrote: >> Hi >> >> Hopefully 3rd time lucky (sorry Roman) >> >> I've done some more testing. The flashing I was seeing with Xserver >> 1.19.5 goes away when I use egl rather then glx with Kwin - I won't be >> using egl in any of the next tests >> >> When I use Xserver 1.20 RC4 with Intel/AMDPGU DDXs Kwin doesn't start >> - the X server is running (I'm attaching logs) - that's the case >> whether compositing is enabled or not in Kwin >> >> With the modesetting driver, Kwin launches with compositing enabled or >> disabled. However the lockups in plasmashell are still present. These >> happen with compositing enabled or disabled too. Simplest way to >> reproduce - press the start button multiple times until it locks up >> (usually within 4 times) - leaving it overnight, it seems to have >> unlocked itself. Alternatively "killall -9 plasmashell && sleep 1 && >> plasmashell" sorts it from "Alt + F2". I've attached the journal again >> just after a freeze (journalctl.freeze in the next email) >> >> Cheers >> >> Mike _______________________________________________ xorg-devel@lists.x.org: X.Org development Archives: http://lists.x.org/archives/xorg-devel Info: https://lists.x.org/mailman/listinfo/xorg-devel