On Thu, Jun 3, 2010 at 8:01 AM, Marek Vasut <marek.va...@gmail.com> wrote:
> Dne Po 8. března 2010 13:16:35 Cyril Hrubis napsal(a):
>> > - And I see display noise while CF Wi-Fi card is active.
>> Forgotten about this one. See for yourself, notice short black vertical
>> lines flashing randomly.
> This is not only case of spitz. I've seen LCD image falling apart on pxafb on
> Voipac PXA270 board. The image was like "torn in half and part of it was moved
> to right, the hole between staying white".
> This happened exactly when I started doing a DMA transfer from a harddrive
> attached through pata_pxa. It's perfectly replicable. If I disabled DMA and
> it run only in PIO, the image was fine.
> I assume the corruption Pavel was seeing is related. My guess is the problems
> are caused when DMA between the CPU and a companion chip happens. I dunno if
> DMA controller doesn't have enough power to supply LCD and the companion chip
> with data, but that's one of my guesses.
> btw. Adjusting the DMA descriptor length in pata_pxa didn't help.
If there is a FIFO attached, may need the FIFO status when the error happens.
And a dump of the DMA registers would also be helpful.
Zaurus-devel mailing list