On Tue, Oct 26, 2010 at 09:36:05AM +0200, Pavel Machek wrote: > Hi! > > > i actually trying to create a debian system for my borzoi. since the > > rootfs from which i start is old (created with a kernel 2.6.24), > > trying to upgrade the sid system leads to a problem with udev (needs at > > least kernel 2.6.26). > > i try creating .config for 2.6.27.54 and 2.6.36 kernel. > > for the moment, both fails > > (dmesg from load with the 2.6.27.54 : > > http://pastebin.com/MCxK8akv : seems that there is a problem with > > i2c...) > > > > for 2.6.36 i builded, nothing starts but the harddrive (?) which i may > > hear turn, but the screen doesn't up, nothing seems to respond.
I had similar problem before (1st stage kernel linux-kexecboot didn't boot at all, but similar config worked fine as 2nd stage kernel started by kexec). I guess you forgot to enable CONFIG_PXA_SHARPSL_DETECT_MACH_ID=y which was disabled by default (after make oldconfig) and is needed only for 1st stage kernel. > > i may provide you my buggy .config, but i think there is no interest. > > tell me if you want. > > > > so, i wondered if you could give me one of your last .config for the > > latest kernel that works, in order that i could try to create a debian > > environment for my zaurus. > > I can provide you with spitz config; it works, modulo wifi... No > borzoi here... > Pavel we also have working spitz config in OE repo http://git.openembedded.org/cgit.cgi/openembedded/tree/recipes/linux/linux-2.6.36 -- Martin 'JaMa' Jansa jabber: martin.ja...@gmail.com _______________________________________________ Zaurus-devel mailing list Zaurus-devel@lists.linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/zaurus-devel
