2011/3/16 Stanislav Brabec <u...@penguin.cz>: > Andrea Adami wrote: > >> it seems vanilla kernel 2.6.38 boots just fine on all Zaurus models. >> We have fresh recipes in OpenEmbedded (linux and linux-kexecboot) for >> c7x0, akita, spitz, poodle. >> Collie and tosa will be committed later today. > > Not only that it boots. Even battery seems to survive overnight suspend! > > I just seen following problems: > - I guess that I seen some errors about missing audio (untested). > - tslib stopped to understand /dev/input/touchscreen0. > > After fixing these two issues, it may be a good candidate for update the > default kernel in the feeds. > > And long time running issues: > - Serial without console may need to close/open after suspend to work > again. > - Suspend still has problems with MAX1111 (but offline charging > surprisingly seems to work, I did not test whether even stopping of > charging works) > - Unfiltered touchscreen precision is still tragical (50 pixel jumps are > not exceptions). > - I still did not find to finish my resistor array keyboard driver (AKA > remote control). I will probably port the old one to get remote > working there. > - Status of filesystem corruptions is not known (it is happening with > varying frequency in all 2.6 kernels).
It's amazing anyway :) Non-working offline changing was long time show-stopper for us. Now we can at least have good working base for fixing relatively small problems! -- Yury Bushmelev _______________________________________________ Zaurus-devel mailing list Zaurus-devel@lists.linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/zaurus-devel